Spracherkennung für: .rst vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]
.. SPDX-License-Identifier: GPL-2.0
Kernel driver bpa-rs600
=======================
Supported chips:
* BPA-RS600-120
Datasheet: Publicly available at the BluTek website
http://blutekpower.com/wp-content/uploads/2019/01/BPA-RS600-120-07-19-2018.pdf
Authors:
- Chris Packham <chris.packham@alliedtelesis.co.nz>
Description
-----------
The BPA-RS600 is a compact 600W removable power supply module.
Usage Notes
-----------
This driver does not probe for PMBus devices. You will have to instantiate
devices explicitly.
Sysfs attributes
----------------
======================= ============================================
curr1_label "iin"
curr1_input Measured input current
curr1_max Maximum input current
curr1_max_alarm Input current high alarm
curr2_label "iout1"
curr2_input Measured output current
curr2_max Maximum output current
curr2_max_alarm Output current high alarm
fan1_input Measured fan speed
fan1_alarm Fan warning
fan1_fault Fan fault
in1_label "vin"
in1_input Measured input voltage
in1_max Maximum input voltage
in1_max_alarm Input voltage high alarm
in1_min Minimum input voltage
in1_min_alarm Input voltage low alarm
in2_label "vout1"
in2_input Measured output voltage
in2_max Maximum output voltage
in2_max_alarm Output voltage high alarm
in2_min Maximum output voltage
in2_min_alarm Output voltage low alarm
power1_label "pin"
power1_input Measured input power
power1_alarm Input power alarm
power1_max Maximum input power
power2_label "pout1"
power2_input Measured output power
power2_max Maximum output power
power2_max_alarm Output power high alarm
temp1_input Measured temperature around input connector
temp1_alarm Temperature alarm
temp2_input Measured temperature around output connector
temp2_alarm Temperature alarm
======================= ============================================
