What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_raw
Date: May 2016
KernelVersion:
Contact: Andrew F. Davis <afd@ti.com>
Description:
Get measured values from the ADC for these stages. Y is the
specific stage number corresponding to datasheet stage names
as follows:
== ==========
1 LED2
2 ALED2/LED3
3 LED1
4 ALED1/LED4
== ==========
Note that channels 5 and 6 represent LED2-ALED2 and LED1-ALED1
respectively which simply helper channels containing the
calculated difference in the value of stage 1 - 2 and 3 - 4.
The values are expressed in 24-bit twos complement.
The LED current for the stage is controlled via
out_currentY_raw.
What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_offset
Date: May 2016
KernelVersion:
Contact: Andrew F. Davis <afd@ti.com>
Description:
Get and set the offset cancellation DAC setting for these
stages. The values are expressed in 5-bit sign-magnitude.
What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_resistance
What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_capacitance
Date: May 2016
KernelVersion:
Contact: Andrew F. Davis <afd@ti.com>
Description:
Get and set the resistance and the capacitance settings for the
Transimpedance Amplifier during the associated stage.
