Quelle  VDiagram.cxx   Sprache: C

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <ShapeFactory.hxx>
#include <VDiagram.hxx>
#include <Diagram.hxx>
#include <PropertyMapper.hxx>
#include <ViewDefines.hxx>
#include <Stripe.hxx>
#include <ObjectIdentifier.hxx>
#include <DiagramHelper.hxx>
#include <ChartType.hxx>
#include <BaseGFXHelper.hxx>
#include <ChartTypeHelper.hxx>
#include <ThreeDHelper.hxx>
#include <defines.hxx>
#include <editeng/unoprnms.hxx>
#include <svx/scene3d.hxx>
#include <svx/e3dsceneupdater.hxx>
#include <comphelper/diagnose_ex.hxx>

namespace chart
{
using namespace ::com::sun::star;
using namespace ::com::sun::star::chart2;

VDiagram::VDiagram(
    const rtl::Reference<Diagram> & xDiagram, const drawing::Direction3D& rPreferredAspectRatio,
    sal_Int32 nDimension )
    : m_nDimensionCount(nDimension)
    , m_xDiagram(xDiagram)
    , m_aPreferredAspectRatio(rPreferredAspectRatio)
    , m_fXAnglePi(0)
    , m_fYAnglePi(0)
    , m_fZAnglePi(0)
    , m_bRightAngledAxes(false)
{
    if( m_nDimensionCount != 3)
        return;

    xDiagram->getRotationAngle( m_fXAnglePi, m_fYAnglePi, m_fZAnglePi );
    auto xChartType = m_xDiagram->getChartTypeByIndex(0);
    if (xChartType.is() ? xChartType->isSupportingRightAngledAxes() : true)
    {
        if(xDiagram.is())
            xDiagram->getPropertyValue(u"RightAngledAxes"_ustr) >>= m_bRightAngledAxes;
        if( m_bRightAngledAxes )
        {
            ThreeDHelper::adaptRadAnglesForRightAngledAxes( m_fXAnglePi, m_fYAnglePi );
            m_fZAnglePi=0.0;
        }
    }
}

VDiagram::~VDiagram()
{
}

void VDiagram::init( const rtl::Reference<SvxShapeGroupAnyD>& xTarget )
{
    m_xTarget  = xTarget;
}

void VDiagram::createShapes( const awt::Point& rPos, const awt::Size& rSize )
{
    m_aAvailablePosIncludingAxes = rPos;
    m_aAvailableSizeIncludingAxes = rSize;

    if( m_nDimensionCount == 3 )
        createShapes_3d();
    else
        createShapes_2d();
}

::basegfx::B2IRectangle VDiagram::adjustPosAndSize( const awt::Point& rPos, const awt::Size& rSize )
{
    ::basegfx::B2IRectangle aAllowedRect( BaseGFXHelper::makeRectangle(m_aAvailablePosIncludingAxes,m_aAvailableSizeIncludingAxes) );
    ::basegfx::B2IRectangle aNewInnerRect( BaseGFXHelper::makeRectangle(rPos,rSize) );
    aNewInnerRect.intersect( aAllowedRect );

    if( m_nDimensionCount == 3 )
        aNewInnerRect = adjustPosAndSize_3d( BaseGFXHelper::B2IRectangleToAWTPoint(aNewInnerRect), BaseGFXHelper::B2IRectangleToAWTSize(aNewInnerRect) );
    else
        aNewInnerRect = adjustPosAndSize_2d( BaseGFXHelper::B2IRectangleToAWTPoint(aNewInnerRect), BaseGFXHelper::B2IRectangleToAWTSize(aNewInnerRect) );

    return aNewInnerRect;
}

::basegfx::B2IRectangle VDiagram::adjustPosAndSize_2d( const awt::Point& rPos, const awt::Size& rAvailableSize )
{
    m_aCurrentPosWithoutAxes = rPos;
    m_aCurrentSizeWithoutAxes = rAvailableSize;
    if( m_aPreferredAspectRatio.DirectionX > 0 && m_aPreferredAspectRatio.DirectionY > 0)
    {
        //do not change aspect ratio
        awt::Size  aAspectRatio( static_cast<sal_Int32>(m_aPreferredAspectRatio.DirectionX*FIXED_SIZE_FOR_3D_CHART_VOLUME),
                                 static_cast<sal_Int32>(m_aPreferredAspectRatio.DirectionY*FIXED_SIZE_FOR_3D_CHART_VOLUME ));
        m_aCurrentSizeWithoutAxes = ShapeFactory::calculateNewSizeRespectingAspectRatio(
                        rAvailableSize, aAspectRatio );
        //center diagram position
        m_aCurrentPosWithoutAxes = ShapeFactory::calculateTopLeftPositionToCenterObject(
            rPos, rAvailableSize, m_aCurrentSizeWithoutAxes );

    }

    if( m_xWall2D.is() )
    {
        m_xWall2D->setSize( m_aCurrentSizeWithoutAxes);
        m_xWall2D->setPosition(m_aCurrentPosWithoutAxes);
    }

    return BaseGFXHelper::makeRectangle(m_aCurrentPosWithoutAxes,m_aCurrentSizeWithoutAxes);
}

void VDiagram::createShapes_2d()
{
    OSL_PRECOND(m_xTarget.is(), "is not proper initialized");
    if (!m_xTarget.is())
        return;

    //create group shape
    rtl::Reference<SvxShapeGroupAnyD> xOuterGroup_Shapes = ShapeFactory::createGroup2D(m_xTarget);
    m_xOuterGroupShape = xOuterGroup_Shapes;

    rtl::Reference<SvxShapeGroupAnyD> xGroupForWall( ShapeFactory::createGroup2D(xOuterGroup_Shapes,u"PlotAreaExcludingAxes"_ustr) );

    //create independent group shape as container for datapoints and such things
    m_xCoordinateRegionShape = ShapeFactory::createGroup2D(xOuterGroup_Shapes,u"testonly;CooContainer=XXX_CID"_ustr);

    bool bAddFloorAndWall = m_xDiagram->isSupportingFloorAndWall();

    //add back wall
    {
        m_xWall2D = ShapeFactory::createRectangle( xGroupForWall );

        try
        {
            OSL_ENSURE( m_xDiagram.is(), "Invalid Diagram model" );
            if( m_xDiagram.is() )
            {
                uno::Reference< beans::XPropertySet > xWallProp( m_xDiagram->getWall());
                if( xWallProp.is())
                    PropertyMapper::setMappedProperties( *m_xWall2D, xWallProp, PropertyMapper::getPropertyNameMapForFillAndLineProperties() );
            }
            if( !bAddFloorAndWall )
            {
                //we always need this object as dummy object for correct scene dimensions
                //but it should not be visible in this case:
                ShapeFactory::makeShapeInvisible( m_xWall2D );
            }
            else
            {
                //CID for selection handling
                OUString aWallCID( ObjectIdentifier::createClassifiedIdentifier( OBJECTTYPE_DIAGRAM_WALL, u"" ) );//@todo read CID from model
                m_xWall2D->SvxShape::setPropertyValue( UNO_NAME_MISC_OBJ_NAME, uno::Any( aWallCID ) );
            }
        }
        catch( const uno::Exception& )
        {
            TOOLS_WARN_EXCEPTION("chart2", "" );
        }
    }

    //position and size for diagram
    adjustPosAndSize_2d( m_aAvailablePosIncludingAxes, m_aAvailableSizeIncludingAxes );
}

static E3dScene* lcl_getE3dScene( const rtl::Reference<SvxShapeGroupAnyD>& xShape )
{
    return DynCastE3dScene(xShape->GetSdrObject());
}

static void lcl_setLightSources(
    const uno::Reference< beans::XPropertySet > & xSource,
    const uno::Reference< beans::XPropertySet > & xDest )
{
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTON_1,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTON_1));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTON_2,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTON_2));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTON_3,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTON_3));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTON_4,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTON_4));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTON_5,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTON_5));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTON_6,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTON_6));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTON_7,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTON_7));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTON_8,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTON_8));

    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTDIRECTION_1,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTDIRECTION_1));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTDIRECTION_2,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTDIRECTION_2));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTDIRECTION_3,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTDIRECTION_3));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTDIRECTION_4,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTDIRECTION_4));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTDIRECTION_5,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTDIRECTION_5));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTDIRECTION_6,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTDIRECTION_6));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTDIRECTION_7,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTDIRECTION_7));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTDIRECTION_8,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTDIRECTION_8));

    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTCOLOR_1,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTCOLOR_1));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTCOLOR_2,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTCOLOR_2));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTCOLOR_3,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTCOLOR_3));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTCOLOR_4,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTCOLOR_4));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTCOLOR_5,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTCOLOR_5));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTCOLOR_6,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTCOLOR_6));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTCOLOR_7,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTCOLOR_7));
    xDest->setPropertyValue( UNO_NAME_3D_SCENE_LIGHTCOLOR_8,
                             xSource->getPropertyValue( UNO_NAME_3D_SCENE_LIGHTCOLOR_8));
}

namespace
{

void lcl_ensureScaleValue( double& rfScale )
{
    OSL_ENSURE(rfScale>0, "calculation error for automatic 3D height in chart");
    if( rfScale<0 )
        rfScale = 1.0;
    else if( rfScale<0.2 )
        rfScale = 0.2;
    else if( rfScale>5.0 )
        rfScale = 5.0;
}

}

void VDiagram::adjustAspectRatio3d( const awt::Size& rAvailableSize )
{
    OSL_PRECOND(m_xAspectRatio3D.is(), "created shape offers no XPropertySet");
    if( !m_xAspectRatio3D.is())
        return;

    try
    {
        double fScaleX = m_aPreferredAspectRatio.DirectionX;
        double fScaleY = m_aPreferredAspectRatio.DirectionY;
        double fScaleZ = m_aPreferredAspectRatio.DirectionZ;

        //normalize scale factors
        {
            double fMax = std::max( std::max( fScaleX, fScaleY) , fScaleZ );
            fScaleX/=fMax;
            fScaleY/=fMax;
            fScaleZ/=fMax;
        }

        if( fScaleX<0 || fScaleY<0 || fScaleZ<0 )
        {
            //calculate automatic 3D aspect ratio that fits good into the given 2D area
            double fW = rAvailableSize.Width;
            double fH = rAvailableSize.Height;

            double sx = fabs(sin(m_fXAnglePi));
            double sy = fabs(sin(m_fYAnglePi));
            double cz = fabs(cos(m_fZAnglePi));
            double sz = fabs(sin(m_fZAnglePi));

            if(m_bRightAngledAxes)
            {
                //base equations:
                //fH*zoomfactor == sx*fScaleZ + fScaleY;
                //fW*zoomfactor == sy*fScaleZ + fScaleX;

                if( fScaleX>0 && fScaleZ>0 )
                {
                    //calculate fScaleY:
                    if( !::basegfx::fTools::equalZero(fW) )
                    {
                        fScaleY = (fH/fW)*(sy*fScaleZ+fScaleX)-(sx*fScaleZ);
                        lcl_ensureScaleValue( fScaleY );
                    }
                    else
                        fScaleY = 1.0;//looking from top or bottom the height is irrelevant
                }
                else if( fScaleY>0 && fScaleZ>0 )
                {
                    //calculate fScaleX:
                    if( !::basegfx::fTools::equalZero(fH) )
                    {
                        fScaleX = (fW/fH)*(sx*fScaleZ+fScaleY)-(sy*fScaleZ);
                        lcl_ensureScaleValue(fScaleX);
                    }
                    else
                        fScaleX = 1.0;//looking from top or bottom height is irrelevant
                }
                else
                {
                    //todo
                    OSL_FAIL("not implemented yet");

                    if( fScaleX<0 )
                        fScaleX = 1.0;
                    if( fScaleY<0 )
                        fScaleY = 1.0;
                    if( fScaleZ<0 )
                        fScaleZ = 1.0;
                }
            }
            else
            {
                //base equations:
                //fH*zoomfactor == cz*fScaleY + sz*fScaleX;
                //fW*zoomfactor == cz*fScaleX + sz*fScaleY;
                //==>  fScaleY*(fH*sz-fW*cz) == fScaleX*(fW*sz-fH*cz);
                if( fScaleX>0 && fScaleZ>0 )
                {
                    //calculate fScaleY:
                    double fDivide = fH*sz-fW*cz;
                    if( !::basegfx::fTools::equalZero(fDivide) )
                    {
                        fScaleY = fScaleX*(fW*sz-fH*cz) / fDivide;
                        lcl_ensureScaleValue(fScaleY);
                    }
                    else
                        fScaleY = 1.0;//looking from top or bottom the height is irrelevant

                }
                else if( fScaleY>0 && fScaleZ>0 )
                {
                    //calculate fScaleX:
                    double fDivide = fW*sz-fH*cz;
                    if( !::basegfx::fTools::equalZero(fDivide) )
                    {
                        fScaleX = fScaleY*(fH*sz-fW*cz) / fDivide;
                        lcl_ensureScaleValue(fScaleX);
                    }
                    else
                        fScaleX = 1.0;//looking from top or bottom height is irrelevant
                }
                else
                {
                    //todo
                    OSL_FAIL("not implemented yet");

                    if( fScaleX<0 )
                        fScaleX = 1.0;
                    if( fScaleY<0 )
                        fScaleY = 1.0;
                    if( fScaleZ<0 )
                        fScaleZ = 1.0;
                }
            }
        }

        //normalize scale factors
        {
            double fMax = std::max( std::max( fScaleX, fScaleY) , fScaleZ );
            fScaleX/=fMax;
            fScaleY/=fMax;
            fScaleZ/=fMax;
        }

        // identity matrix
        ::basegfx::B3DHomMatrix aResult;
        aResult.translate( -FIXED_SIZE_FOR_3D_CHART_VOLUME/2.0,
                        -FIXED_SIZE_FOR_3D_CHART_VOLUME/2.0,
                        -FIXED_SIZE_FOR_3D_CHART_VOLUME/2.0 );
        aResult.scale( fScaleX, fScaleY, fScaleZ );
        aResult.translate( FIXED_SIZE_FOR_3D_CHART_VOLUME/2.0,
                        FIXED_SIZE_FOR_3D_CHART_VOLUME/2.0,
                        FIXED_SIZE_FOR_3D_CHART_VOLUME/2.0 );

        // To get the 3D aspect ratio's effect on the 2D scene size, the scene's 2D size needs to be adapted to
        // 3D content changes here. The tooling class remembers the current 3D transformation stack
        // and in its destructor, calculates a new 2D SnapRect for the scene and it's modified 3D geometry.
        E3DModifySceneSnapRectUpdater aUpdater(lcl_getE3dScene(m_xOuterGroupShape));

        m_xAspectRatio3D->setPropertyValue( UNO_NAME_3D_TRANSFORM_MATRIX
            , uno::Any(BaseGFXHelper::B3DHomMatrixToHomogenMatrix( aResult )) );
    }
    catch( const uno::Exception& )
    {
        TOOLS_WARN_EXCEPTION("chart2", "" );
    }
}

::basegfx::B2IRectangle VDiagram::adjustPosAndSize_3d( const awt::Point& rPos, const awt::Size& rAvailableSize )
{
    adjustAspectRatio3d( rAvailableSize );

    //do not change aspect ratio of 3D scene with 2D bound rect
    m_aCurrentSizeWithoutAxes = ShapeFactory::calculateNewSizeRespectingAspectRatio(
                    rAvailableSize, m_xOuterGroupShape->getSize() );
    m_xOuterGroupShape->setSize( m_aCurrentSizeWithoutAxes );

    //center diagram position
    m_aCurrentPosWithoutAxes= ShapeFactory::calculateTopLeftPositionToCenterObject(
         rPos, rAvailableSize, m_aCurrentSizeWithoutAxes );
    m_xOuterGroupShape->setPosition(m_aCurrentPosWithoutAxes);

    return BaseGFXHelper::makeRectangle(m_aCurrentPosWithoutAxes,m_aCurrentSizeWithoutAxes);
}

void VDiagram::createShapes_3d()
{
    OSL_PRECOND(m_xTarget.is(), "is not proper initialized");
    if (!m_xTarget.is())
        return;

    //create shape
    rtl::Reference<Svx3DSceneObject> xShapes = ShapeFactory::createGroup3D( m_xTarget, u"PlotAreaExcludingAxes"_ustr );
    m_xOuterGroupShape = xShapes;

    rtl::Reference<SvxShapeGroupAnyD> xOuterGroup_Shapes = m_xOuterGroupShape;

    //create additional group to manipulate the aspect ratio of the whole diagram:
    {
        rtl::Reference<Svx3DSceneObject> xAdditionalGroup = ShapeFactory::createGroup3D( xOuterGroup_Shapes );
        xOuterGroup_Shapes = xAdditionalGroup;

        m_xAspectRatio3D = std::move(xAdditionalGroup);
    }

    bool bAddFloorAndWall = m_xDiagram->isSupportingFloorAndWall();

    const bool bDoubleSided = false;

    //add walls
    {
        uno::Reference< beans::XPropertySet > xWallProp;
        if( m_xDiagram.is() )
            xWallProp.set( m_xDiagram->getWall() );

        OUString aWallCID( ObjectIdentifier::createClassifiedIdentifier( OBJECTTYPE_DIAGRAM_WALL, u"" ) );//@todo read CID from model
        if( !bAddFloorAndWall )
            aWallCID.clear();
        rtl::Reference<Svx3DSceneObject> xWallGroup_Shapes = ShapeFactory::createGroup3D( xOuterGroup_Shapes, aWallCID );

        CuboidPlanePosition eLeftWallPos( ThreeDHelper::getAutomaticCuboidPlanePositionForStandardLeftWall( m_xDiagram ) );
        CuboidPlanePosition eBackWallPos( ThreeDHelper::getAutomaticCuboidPlanePositionForStandardBackWall( m_xDiagram ) );

        //add left wall
        {
            short nRotatedTexture = ( eBackWallPos==CuboidPlanePosition_Front ) ? 3 : 1;
            double xPos = 0.0;
            if( eLeftWallPos==CuboidPlanePosition_Right )
                xPos = FIXED_SIZE_FOR_3D_CHART_VOLUME;
            Stripe aStripe( drawing::Position3D(xPos,FIXED_SIZE_FOR_3D_CHART_VOLUME,0)
                , drawing::Direction3D(0,0,FIXED_SIZE_FOR_3D_CHART_VOLUME)
                , drawing::Direction3D(0,-FIXED_SIZE_FOR_3D_CHART_VOLUME,0) );
            if( eLeftWallPos==CuboidPlanePosition_Right )
            {
                nRotatedTexture = ( eBackWallPos==CuboidPlanePosition_Front ) ? 2 : 0;
                aStripe = Stripe( drawing::Position3D(xPos,FIXED_SIZE_FOR_3D_CHART_VOLUME,0)
                    , drawing::Direction3D(0,-FIXED_SIZE_FOR_3D_CHART_VOLUME,0)
                    , drawing::Direction3D(0,0,FIXED_SIZE_FOR_3D_CHART_VOLUME) );
            }
            aStripe.InvertNormal(true);

            rtl::Reference<Svx3DPolygonObject> xShape =
                ShapeFactory::createStripe( xWallGroup_Shapes, aStripe
                    , xWallProp, PropertyMapper::getPropertyNameMapForFillAndLineProperties(), bDoubleSided, nRotatedTexture );
            if( !bAddFloorAndWall )
            {
                //we always need this object as dummy object for correct scene dimensions
                //but it should not be visible in this case:
                ShapeFactory::makeShapeInvisible( xShape );
            }
        }
        //add back wall
        {
            short nRotatedTexture = 0;
            double zPos = 0.0;
            if( eBackWallPos==CuboidPlanePosition_Front )
                    zPos = FIXED_SIZE_FOR_3D_CHART_VOLUME;
            Stripe aStripe( drawing::Position3D(0,FIXED_SIZE_FOR_3D_CHART_VOLUME,zPos)
                , drawing::Direction3D(0,-FIXED_SIZE_FOR_3D_CHART_VOLUME,0)
                , drawing::Direction3D(FIXED_SIZE_FOR_3D_CHART_VOLUME,0,0) );
            if( eBackWallPos==CuboidPlanePosition_Front )
            {
                aStripe = Stripe( drawing::Position3D(0,FIXED_SIZE_FOR_3D_CHART_VOLUME,zPos)
                , drawing::Direction3D(FIXED_SIZE_FOR_3D_CHART_VOLUME,0,0)
                , drawing::Direction3D(0,-FIXED_SIZE_FOR_3D_CHART_VOLUME,0) );
                nRotatedTexture = 3;
            }
            aStripe.InvertNormal(true);

            rtl::Reference<Svx3DPolygonObject> xShape =
                ShapeFactory::createStripe(xWallGroup_Shapes, aStripe
                    , xWallProp, PropertyMapper::getPropertyNameMapForFillAndLineProperties(), bDoubleSided, nRotatedTexture );
            if( !bAddFloorAndWall )
            {
                //we always need this object as dummy object for correct scene dimensions
                //but it should not be visible in this case:
                ShapeFactory::makeShapeInvisible( xShape );
            }
        }
    }

    try
    {
        //perspective
        {
            //ignore distance and focal length from file format and model completely
            //use vrp only to indicate the distance of the camera and thus influence the perspective
            m_xOuterGroupShape->setPropertyValue( UNO_NAME_3D_SCENE_DISTANCE, uno::Any(
                                        static_cast<sal_Int32>(m_xDiagram->getCameraDistance())));
            m_xOuterGroupShape->setPropertyValue( UNO_NAME_3D_SCENE_PERSPECTIVE,
                                        m_xDiagram->getPropertyValue( UNO_NAME_3D_SCENE_PERSPECTIVE));
        }

        //light
        {
            m_xOuterGroupShape->setPropertyValue( UNO_NAME_3D_SCENE_SHADE_MODE,
                                        m_xDiagram->getPropertyValue( UNO_NAME_3D_SCENE_SHADE_MODE));
            m_xOuterGroupShape->setPropertyValue( UNO_NAME_3D_SCENE_AMBIENTCOLOR,
                                        m_xDiagram->getPropertyValue( UNO_NAME_3D_SCENE_AMBIENTCOLOR));
            m_xOuterGroupShape->setPropertyValue( UNO_NAME_3D_SCENE_TWO_SIDED_LIGHTING,
                                        m_xDiagram->getPropertyValue( UNO_NAME_3D_SCENE_TWO_SIDED_LIGHTING));
            lcl_setLightSources( m_xDiagram, m_xOuterGroupShape );
        }

        //rotation
        {
            //set diagrams rotation is set exclusively via the transformation matrix
            //don't set a camera at all!
            //the camera's rotation is incorporated into this matrix

            ::basegfx::B3DHomMatrix aEffectiveTransformation;
            aEffectiveTransformation.translate(-FIXED_SIZE_FOR_3D_CHART_VOLUME/2.0, -FIXED_SIZE_FOR_3D_CHART_VOLUME/2.0, -FIXED_SIZE_FOR_3D_CHART_VOLUME/2.0);

            if(!m_bRightAngledAxes)
                aEffectiveTransformation.rotate(m_fXAnglePi,m_fYAnglePi,m_fZAnglePi);
            else
                aEffectiveTransformation.shearXY(m_fYAnglePi,-m_fXAnglePi);

            //#i98497# 3D charts are rendered with wrong size
            E3DModifySceneSnapRectUpdater aUpdater(lcl_getE3dScene(m_xOuterGroupShape));

            m_xOuterGroupShape->setPropertyValue( UNO_NAME_3D_TRANSFORM_MATRIX,
                    uno::Any( BaseGFXHelper::B3DHomMatrixToHomogenMatrix( aEffectiveTransformation ) ) );
        }
    }
    catch( const uno::Exception & )
    {
        DBG_UNHANDLED_EXCEPTION("chart2" );
    }

    //add floor plate
    {
        uno::Reference< beans::XPropertySet > xFloorProp;
        if( m_xDiagram.is() )
            xFloorProp.set( m_xDiagram->getFloor() );

        Stripe aStripe( drawing::Position3D(0,0,0)
            , drawing::Direction3D(0,0,FIXED_SIZE_FOR_3D_CHART_VOLUME)
            , drawing::Direction3D(FIXED_SIZE_FOR_3D_CHART_VOLUME,0,0) );
        aStripe.InvertNormal(true);

        rtl::Reference<Svx3DPolygonObject> xShape =
            ShapeFactory::createStripe(xOuterGroup_Shapes, aStripe
                , xFloorProp, PropertyMapper::getPropertyNameMapForFillAndLineProperties(), bDoubleSided );

        CuboidPlanePosition eBottomPos( ThreeDHelper::getAutomaticCuboidPlanePositionForStandardBottom( m_xDiagram ) );
        if( !bAddFloorAndWall || (eBottomPos!=CuboidPlanePosition_Bottom) )
        {
            //we always need this object as dummy object for correct scene dimensions
            //but it should not be visible in this case:
            ShapeFactory::makeShapeInvisible( xShape );
        }
        else
        {
            OUString aFloorCID( ObjectIdentifier::createClassifiedIdentifier( OBJECTTYPE_DIAGRAM_FLOOR, u"" ) );//@todo read CID from model
            ShapeFactory::setShapeName( xShape, aFloorCID );
        }
    }

    //create an additional scene for the smaller inner coordinate region:
    {
        rtl::Reference<Svx3DSceneObject> xShapes2 = ShapeFactory::createGroup3D( xOuterGroup_Shapes,u"testonly;CooContainer=XXX_CID"_ustr );
        m_xCoordinateRegionShape = xShapes2;

        try
        {
            double fXScale = (FIXED_SIZE_FOR_3D_CHART_VOLUME -GRID_TO_WALL_DISTANCE) /FIXED_SIZE_FOR_3D_CHART_VOLUME;
            double fYScale = (FIXED_SIZE_FOR_3D_CHART_VOLUME -GRID_TO_WALL_DISTANCE) /FIXED_SIZE_FOR_3D_CHART_VOLUME;
            double fZScale = (FIXED_SIZE_FOR_3D_CHART_VOLUME -GRID_TO_WALL_DISTANCE) /FIXED_SIZE_FOR_3D_CHART_VOLUME;

            ::basegfx::B3DHomMatrix aM;
            aM.translate(GRID_TO_WALL_DISTANCE/fXScale, GRID_TO_WALL_DISTANCE/fYScale, GRID_TO_WALL_DISTANCE/fZScale);
            aM.scale( fXScale, fYScale, fZScale );
            E3DModifySceneSnapRectUpdater aUpdater(lcl_getE3dScene(m_xOuterGroupShape));

            xShapes2->SvxShape::setPropertyValue( UNO_NAME_3D_TRANSFORM_MATRIX
                , uno::Any(BaseGFXHelper::B3DHomMatrixToHomogenMatrix(aM)) );
        }
        catch( const uno::Exception& )
        {
            TOOLS_WARN_EXCEPTION("chart2", "" );
        }
    }

    m_aCurrentPosWithoutAxes = m_aAvailablePosIncludingAxes;
    m_aCurrentSizeWithoutAxes = m_aAvailableSizeIncludingAxes;
    adjustPosAndSize_3d( m_aAvailablePosIncludingAxes, m_aAvailableSizeIncludingAxes );
}

basegfx::B2IRectangle VDiagram::getCurrentRectangle() const
{
    return BaseGFXHelper::makeRectangle(m_aCurrentPosWithoutAxes,m_aCurrentSizeWithoutAxes);
}

void VDiagram::reduceToMinimumSize()
{
    if( !m_xOuterGroupShape.is() )
        return;

    awt::Size aMaxSize( m_aAvailableSizeIncludingAxes );
    awt::Point aMaxPos( m_aAvailablePosIncludingAxes );

    sal_Int32 nNewWidth = std::round(aMaxSize.Width/2.2);
    sal_Int32 nNewHeight = std::round(aMaxSize.Height/2.2);
    awt::Size aNewSize( nNewWidth, nNewHeight );
    awt::Point aNewPos( aMaxPos );
    aNewPos.X += nNewWidth;
    aNewPos.Y += nNewHeight;

    adjustPosAndSize( aNewPos, aNewSize );
}

::basegfx::B2IRectangle VDiagram::adjustInnerSize( const ::basegfx::B2IRectangle&&nbsp;rConsumedOuterRect )
{
    awt::Point aNewPos = m_aCurrentPosWithoutAxes;
    awt::Size aNewSize = m_aCurrentSizeWithoutAxes;

    basegfx::B2IRectangle aAvailableOuterRect =
        BaseGFXHelper::makeRectangle(m_aAvailablePosIncludingAxes, m_aAvailableSizeIncludingAxes);

    sal_Int32 nDeltaWidth = aAvailableOuterRect.getWidth() - rConsumedOuterRect.getWidth();
    sal_Int32 nDeltaHeight = aAvailableOuterRect.getHeight() - rConsumedOuterRect.getHeight();
    if( (aNewSize.Width + nDeltaWidth) < aAvailableOuterRect.getWidth()/3 )
        nDeltaWidth = aAvailableOuterRect.getWidth()/3 - aNewSize.Width;
    aNewSize.Width += nDeltaWidth;

    if( (aNewSize.Height + nDeltaHeight) < aAvailableOuterRect.getHeight()/3 )
        nDeltaHeight = aAvailableOuterRect.getHeight()/3 - aNewSize.Height;
    aNewSize.Height += nDeltaHeight;

    sal_Int32 nDiffLeft = rConsumedOuterRect.getMinX() - aAvailableOuterRect.getMinX();
    sal_Int32 nDiffRight = aAvailableOuterRect.getMaxX() - rConsumedOuterRect.getMaxX();
    if( nDiffLeft >= 0 )
        aNewPos.X -= nDiffLeft;
    else if( nDiffRight >= 0 )
    {
        if( nDiffRight > -nDiffLeft )
            aNewPos.X += abs(nDiffLeft);
        else if( nDiffRight > abs(nDeltaWidth) )
            aNewPos.X += nDiffRight;
        else
            aNewPos.X += abs(nDeltaWidth);
    }

    sal_Int32 nDiffUp = rConsumedOuterRect.getMinY() - aAvailableOuterRect.getMinY();
    sal_Int32 nDiffDown = aAvailableOuterRect.getMaxY() - rConsumedOuterRect.getMaxY();
    if( nDiffUp >= 0 )
        aNewPos.Y -= nDiffUp;
    else if( nDiffDown >= 0 )
    {
        if( nDiffDown > -nDiffUp )
            aNewPos.Y += abs(nDiffUp);
        else if( nDiffDown > abs(nDeltaHeight) )
            aNewPos.Y += nDiffDown;
        else
            aNewPos.Y += abs(nDeltaHeight);
    }

    return adjustPosAndSize( aNewPos, aNewSize );
}

} //namespace chart

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */