// SPDX-License-Identifier: GPL-2.0-only
/*
* BYD TouchPad PS / 2 mouse driver
*
* Copyright ( C ) 2015 Chris Diamand < chris @ diamand . org >
* Copyright ( C ) 2015 Richard Pospesel
* Copyright ( C ) 2015 Tai Chi Minh Ralph Eastwood
* Copyright ( C ) 2015 Martin Wimpress
* Copyright ( C ) 2015 Jay Kuri
*/
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/libps2.h>
#include <linux/serio.h>
#include <linux/slab.h>
#include "psmouse.h"
#include "byd.h"
/* PS2 Bits */
#define PS2_Y_OVERFLOW BIT_MASK(7 )
#define PS2_X_OVERFLOW BIT_MASK(6 )
#define PS2_Y_SIGN BIT_MASK(5 )
#define PS2_X_SIGN BIT_MASK(4 )
#define PS2_ALWAYS_1 BIT_MASK(3 )
#define PS2_MIDDLE BIT_MASK(2 )
#define PS2_RIGHT BIT_MASK(1 )
#define PS2_LEFT BIT_MASK(0 )
/*
* BYD pad constants
*/
/*
* True device resolution is unknown , however experiments show the
* resolution is about 111 units / mm .
* Absolute coordinate packets are in the range 0 - 255 for both X and Y
* we pick ABS_X / ABS_Y dimensions which are multiples of 256 and in
* the right ballpark given the touchpad ' s physical dimensions and estimate
* resolution per spec sheet , device active area dimensions are
* 101 . 6 x 60 . 1 mm .
*/
#define BYD_PAD_WIDTH 11264
#define BYD_PAD_HEIGHT 6656
#define BYD_PAD_RESOLUTION 111
/*
* Given the above dimensions , relative packets velocity is in multiples of
* 1 unit / 11 milliseconds . We use this dt to estimate distance traveled
*/
#define BYD_DT 11
/* Time in jiffies used to timeout various touch events (64 ms) */
#define BYD_TOUCH_TIMEOUT msecs_to_jiffies(64 )
/* BYD commands reverse engineered from windows driver */
/*
* Swipe gesture from off - pad to on - pad
* 0 : disable
* 1 : enable
*/
#define BYD_CMD_SET_OFFSCREEN_SWIPE 0 x10cc
/*
* Tap and drag delay time
* 0 : disable
* 1 - 8 : least to most delay
*/
#define BYD_CMD_SET_TAP_DRAG_DELAY_TIME 0 x10cf
/*
* Physical buttons function mapping
* 0 : enable
* 4 : normal
* 5 : left button custom command
* 6 : right button custom command
* 8 : disable
*/
#define BYD_CMD_SET_PHYSICAL_BUTTONS 0 x10d0
/*
* Absolute mode ( 1 byte X / Y resolution )
* 0 : disable
* 2 : enable
*/
#define BYD_CMD_SET_ABSOLUTE_MODE 0 x10d1
/*
* Two finger scrolling
* 1 : vertical
* 2 : horizontal
* 3 : vertical + horizontal
* 4 : disable
*/
#define BYD_CMD_SET_TWO_FINGER_SCROLL 0 x10d2
/*
* Handedness
* 1 : right handed
* 2 : left handed
*/
#define BYD_CMD_SET_HANDEDNESS 0 x10d3
/*
* Tap to click
* 1 : enable
* 2 : disable
*/
#define BYD_CMD_SET_TAP 0 x10d4
/*
* Tap and drag
* 1 : tap and hold to drag
* 2 : tap and hold to drag + lock
* 3 : disable
*/
#define BYD_CMD_SET_TAP_DRAG 0 x10d5
/*
* Touch sensitivity
* 1 - 7 : least to most sensitive
*/
#define BYD_CMD_SET_TOUCH_SENSITIVITY 0 x10d6
/*
* One finger scrolling
* 1 : vertical
* 2 : horizontal
* 3 : vertical + horizontal
* 4 : disable
*/
#define BYD_CMD_SET_ONE_FINGER_SCROLL 0 x10d7
/*
* One finger scrolling function
* 1 : free scrolling
* 2 : edge motion
* 3 : free scrolling + edge motion
* 4 : disable
*/
#define BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC 0 x10d8
/*
* Sliding speed
* 1 - 5 : slowest to fastest
*/
#define BYD_CMD_SET_SLIDING_SPEED 0 x10da
/*
* Edge motion
* 1 : disable
* 2 : enable when dragging
* 3 : enable when dragging and pointing
*/
#define BYD_CMD_SET_EDGE_MOTION 0 x10db
/*
* Left edge region size
* 0 - 7 : smallest to largest width
*/
#define BYD_CMD_SET_LEFT_EDGE_REGION 0 x10dc
/*
* Top edge region size
* 0 - 9 : smallest to largest height
*/
#define BYD_CMD_SET_TOP_EDGE_REGION 0 x10dd
/*
* Disregard palm press as clicks
* 1 - 6 : smallest to largest
*/
#define BYD_CMD_SET_PALM_CHECK 0 x10de
/*
* Right edge region size
* 0 - 7 : smallest to largest width
*/
#define BYD_CMD_SET_RIGHT_EDGE_REGION 0 x10df
/*
* Bottom edge region size
* 0 - 9 : smallest to largest height
*/
#define BYD_CMD_SET_BOTTOM_EDGE_REGION 0 x10e1
/*
* Multitouch gestures
* 1 : enable
* 2 : disable
*/
#define BYD_CMD_SET_MULTITOUCH 0 x10e3
/*
* Edge motion speed
* 0 : control with finger pressure
* 1 - 9 : slowest to fastest
*/
#define BYD_CMD_SET_EDGE_MOTION_SPEED 0 x10e4
/*
* Two finger scolling function
* 0 : free scrolling
* 1 : free scrolling ( with momentum )
* 2 : edge motion
* 3 : free scrolling ( with momentum ) + edge motion
* 4 : disable
*/
#define BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC 0 x10e5
/*
* The touchpad generates a mixture of absolute and relative packets , indicated
* by the last byte of each packet being set to one of the following :
*/
#define BYD_PACKET_ABSOLUTE 0 xf8
#define BYD_PACKET_RELATIVE 0 x00
/* Multitouch gesture packets */
#define BYD_PACKET_PINCH_IN 0 xd8
#define BYD_PACKET_PINCH_OUT 0 x28
#define BYD_PACKET_ROTATE_CLOCKWISE 0 x29
#define BYD_PACKET_ROTATE_ANTICLOCKWISE 0 xd7
#define BYD_PACKET_TWO_FINGER_SCROLL_RIGHT 0 x2a
#define BYD_PACKET_TWO_FINGER_SCROLL_DOWN 0 x2b
#define BYD_PACKET_TWO_FINGER_SCROLL_UP 0 xd5
#define BYD_PACKET_TWO_FINGER_SCROLL_LEFT 0 xd6
#define BYD_PACKET_THREE_FINGER_SWIPE_RIGHT 0 x2c
#define BYD_PACKET_THREE_FINGER_SWIPE_DOWN 0 x2d
#define BYD_PACKET_THREE_FINGER_SWIPE_UP 0 xd3
#define BYD_PACKET_THREE_FINGER_SWIPE_LEFT 0 xd4
#define BYD_PACKET_FOUR_FINGER_DOWN 0 x33
#define BYD_PACKET_FOUR_FINGER_UP 0 xcd
#define BYD_PACKET_REGION_SCROLL_RIGHT 0 x35
#define BYD_PACKET_REGION_SCROLL_DOWN 0 x36
#define BYD_PACKET_REGION_SCROLL_UP 0 xca
#define BYD_PACKET_REGION_SCROLL_LEFT 0 xcb
#define BYD_PACKET_RIGHT_CORNER_CLICK 0 xd2
#define BYD_PACKET_LEFT_CORNER_CLICK 0 x2e
#define BYD_PACKET_LEFT_AND_RIGHT_CORNER_CLICK 0 x2f
#define BYD_PACKET_ONTO_PAD_SWIPE_RIGHT 0 x37
#define BYD_PACKET_ONTO_PAD_SWIPE_DOWN 0 x30
#define BYD_PACKET_ONTO_PAD_SWIPE_UP 0 xd0
#define BYD_PACKET_ONTO_PAD_SWIPE_LEFT 0 xc9
struct byd_data {
struct timer_list timer;
struct psmouse *psmouse;
s32 abs_x;
s32 abs_y;
typeof(jiffies) last_touch_time;
bool btn_left;
bool btn_right;
bool touch;
};
static void byd_report_input(struct psmouse *psmouse)
{
struct byd_data *priv = psmouse->private ;
struct input_dev *dev = psmouse->dev;
input_report_key(dev, BTN_TOUCH, priv->touch);
input_report_key(dev, BTN_TOOL_FINGER, priv->touch);
input_report_abs(dev, ABS_X, priv->abs_x);
input_report_abs(dev, ABS_Y, priv->abs_y);
input_report_key(dev, BTN_LEFT, priv->btn_left);
input_report_key(dev, BTN_RIGHT, priv->btn_right);
input_sync(dev);
}
static void byd_clear_touch(struct timer_list *t)
{
struct byd_data *priv = timer_container_of(priv, t, timer);
struct psmouse *psmouse = priv->psmouse;
guard(serio_pause_rx)(psmouse->ps2dev.serio);
priv->touch = false ;
byd_report_input(psmouse);
/*
* Move cursor back to center of pad when we lose touch - this
* specifically improves user experience when moving cursor with one
* finger , and pressing a button with another .
*/
priv->abs_x = BYD_PAD_WIDTH / 2 ;
priv->abs_y = BYD_PAD_HEIGHT / 2 ;
}
static psmouse_ret_t byd_process_byte(struct psmouse *psmouse)
{
struct byd_data *priv = psmouse->private ;
u8 *pkt = psmouse->packet;
if (psmouse->pktcnt > 0 && !(pkt[0 ] & PS2_ALWAYS_1)) {
psmouse_warn(psmouse, "Always_1 bit not 1. pkt[0] = %02x\n" ,
pkt[0 ]);
return PSMOUSE_BAD_DATA;
}
if (psmouse->pktcnt < psmouse->pktsize)
return PSMOUSE_GOOD_DATA;
/* Otherwise, a full packet has been received */
switch (pkt[3 ]) {
case BYD_PACKET_ABSOLUTE:
/* Only use absolute packets for the start of movement. */
if (!priv->touch) {
/* needed to detect tap */
typeof(jiffies) tap_time =
priv->last_touch_time + BYD_TOUCH_TIMEOUT;
priv->touch = time_after(jiffies, tap_time);
/* init abs position */
priv->abs_x = pkt[1 ] * (BYD_PAD_WIDTH / 256 );
priv->abs_y = (255 - pkt[2 ]) * (BYD_PAD_HEIGHT / 256 );
}
break ;
case BYD_PACKET_RELATIVE: {
/* Standard packet */
/* Sign-extend if a sign bit is set. */
u32 signx = pkt[0 ] & PS2_X_SIGN ? ~0 xFF : 0 ;
u32 signy = pkt[0 ] & PS2_Y_SIGN ? ~0 xFF : 0 ;
s32 dx = signx | (int ) pkt[1 ];
s32 dy = signy | (int ) pkt[2 ];
/* Update position based on velocity */
priv->abs_x += dx * BYD_DT;
priv->abs_y -= dy * BYD_DT;
priv->touch = true ;
break ;
}
default :
psmouse_warn(psmouse,
"Unrecognized Z: pkt = %02x %02x %02x %02x\n" ,
psmouse->packet[0 ], psmouse->packet[1 ],
psmouse->packet[2 ], psmouse->packet[3 ]);
return PSMOUSE_BAD_DATA;
}
priv->btn_left = pkt[0 ] & PS2_LEFT;
priv->btn_right = pkt[0 ] & PS2_RIGHT;
byd_report_input(psmouse);
/* Reset time since last touch. */
if (priv->touch) {
priv->last_touch_time = jiffies;
mod_timer(&priv->timer, jiffies + BYD_TOUCH_TIMEOUT);
}
return PSMOUSE_FULL_PACKET;
}
static int byd_reset_touchpad(struct psmouse *psmouse)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
u8 param[4 ];
size_t i;
static const struct {
u16 command;
u8 arg;
} seq[] = {
/*
* Intellimouse initialization sequence , to get 4 - byte instead
* of 3 - byte packets .
*/
{ PSMOUSE_CMD_SETRATE, 0 xC8 },
{ PSMOUSE_CMD_SETRATE, 0 x64 },
{ PSMOUSE_CMD_SETRATE, 0 x50 },
{ PSMOUSE_CMD_GETID, 0 },
{ PSMOUSE_CMD_ENABLE, 0 },
/*
* BYD - specific initialization , which enables absolute mode and
* ( if desired ) , the touchpad ' s built - in gesture detection .
*/
{ 0 x10E2, 0 x00 },
{ 0 x10E0, 0 x02 },
/* The touchpad should reply with 4 seemingly-random bytes */
{ 0 x14E0, 0 x01 },
/* Pairs of parameters and values. */
{ BYD_CMD_SET_HANDEDNESS, 0 x01 },
{ BYD_CMD_SET_PHYSICAL_BUTTONS, 0 x04 },
{ BYD_CMD_SET_TAP, 0 x02 },
{ BYD_CMD_SET_ONE_FINGER_SCROLL, 0 x04 },
{ BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC, 0 x04 },
{ BYD_CMD_SET_EDGE_MOTION, 0 x01 },
{ BYD_CMD_SET_PALM_CHECK, 0 x00 },
{ BYD_CMD_SET_MULTITOUCH, 0 x02 },
{ BYD_CMD_SET_TWO_FINGER_SCROLL, 0 x04 },
{ BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC, 0 x04 },
{ BYD_CMD_SET_LEFT_EDGE_REGION, 0 x00 },
{ BYD_CMD_SET_TOP_EDGE_REGION, 0 x00 },
{ BYD_CMD_SET_RIGHT_EDGE_REGION, 0 x00 },
{ BYD_CMD_SET_BOTTOM_EDGE_REGION, 0 x00 },
{ BYD_CMD_SET_ABSOLUTE_MODE, 0 x02 },
/* Finalize initialization. */
{ 0 x10E0, 0 x00 },
{ 0 x10E2, 0 x01 },
};
for (i = 0 ; i < ARRAY_SIZE(seq); ++i) {
memset(param, 0 , sizeof (param));
param[0 ] = seq[i].arg;
if (ps2_command(ps2dev, param, seq[i].command))
return -EIO;
}
psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
return 0 ;
}
static int byd_reconnect(struct psmouse *psmouse)
{
int retry = 0 , error = 0 ;
psmouse_dbg(psmouse, "Reconnect\n" );
do {
psmouse_reset(psmouse);
if (retry)
ssleep(1 );
error = byd_detect(psmouse, 0 );
} while (error && ++retry < 3 );
if (error)
return error;
psmouse_dbg(psmouse, "Reconnected after %d attempts\n" , retry);
error = byd_reset_touchpad(psmouse);
if (error) {
psmouse_err(psmouse, "Unable to initialize device\n" );
return error;
}
return 0 ;
}
static void byd_disconnect(struct psmouse *psmouse)
{
struct byd_data *priv = psmouse->private ;
if (priv) {
timer_delete(&priv->timer);
kfree(psmouse->private );
psmouse->private = NULL;
}
}
int byd_detect(struct psmouse *psmouse, bool set_properties)
{
struct ps2dev *ps2dev = &psmouse->ps2dev;
u8 param[4 ] = {0 x03, 0 x00, 0 x00, 0 x00};
if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
return -1 ;
if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
return -1 ;
if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
return -1 ;
if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
return -1 ;
if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
return -1 ;
if (param[1 ] != 0 x03 || param[2 ] != 0 x64)
return -ENODEV;
psmouse_dbg(psmouse, "BYD touchpad detected\n" );
if (set_properties) {
psmouse->vendor = "BYD" ;
psmouse->name = "TouchPad" ;
}
return 0 ;
}
int byd_init(struct psmouse *psmouse)
{
struct input_dev *dev = psmouse->dev;
struct byd_data *priv;
if (psmouse_reset(psmouse))
return -EIO;
if (byd_reset_touchpad(psmouse))
return -EIO;
priv = kzalloc(sizeof (*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->psmouse = psmouse;
timer_setup(&priv->timer, byd_clear_touch, 0 );
psmouse->private = priv;
psmouse->disconnect = byd_disconnect;
psmouse->reconnect = byd_reconnect;
psmouse->protocol_handler = byd_process_byte;
psmouse->pktsize = 4 ;
psmouse->resync_time = 0 ;
__set_bit(INPUT_PROP_POINTER, dev->propbit);
/* Touchpad */
__set_bit(BTN_TOUCH, dev->keybit);
__set_bit(BTN_TOOL_FINGER, dev->keybit);
/* Buttons */
__set_bit(BTN_LEFT, dev->keybit);
__set_bit(BTN_RIGHT, dev->keybit);
__clear_bit(BTN_MIDDLE, dev->keybit);
/* Absolute position */
__set_bit(EV_ABS, dev->evbit);
input_set_abs_params(dev, ABS_X, 0 , BYD_PAD_WIDTH, 0 , 0 );
input_set_abs_params(dev, ABS_Y, 0 , BYD_PAD_HEIGHT, 0 , 0 );
input_abs_set_res(dev, ABS_X, BYD_PAD_RESOLUTION);
input_abs_set_res(dev, ABS_Y, BYD_PAD_RESOLUTION);
/* No relative support */
__clear_bit(EV_REL, dev->evbit);
__clear_bit(REL_X, dev->relbit);
__clear_bit(REL_Y, dev->relbit);
return 0 ;
}
Messung V0.5 in Prozent C=93 H=95 G=93
¤ Diese beiden folgenden Angebotsgruppen bietet das Unternehmen0.10Angebot
(Wie Sie bei der Firma Beratungs- und Dienstleistungen beauftragen können 2026-09-29)
¤
*Eine klare Vorstellung vom Zielzustand