Eine aufbereitete Darstellung der Quelle

 
     
 
 
Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 
Benutzer

products/Sources/formale Sprachen/Cobol/Test-Suite/COBOL/NC/   (NIST Cobol Test-Suite ©)  Datei vom 4.1.2008 mit Größe 49 kB image not shown  

Bilddatei

yts792.cob


products/Sources/formale Sprachen/Cobol/Test-Suite/SQL P/yts/yts792.cob

IDENTIFICATION DIVISION. PROGRAM-ID. YTS792. ENVIRONMENT DIVISION. CONFIGURATION SECTION. SOURCE-COMPUTER. xyz. OBJECT-COMPUTER. xyz. DATA DIVISION. WORKING-STORAGE SECTION. * EMBEDDED COBOL (file "YTS792.PCO") *Copyright 1996 National Computing Centre Limited, *and Computer Logic R&D S.A *on behalf of the CTS5 SQL2 Project. *All rights reserved. *The CTS5 SQL2 Project is sponsored by the European Community. * *The National Computing Centre Limited and Computer Logic R&D *have given permission to NIST to distribute this program *over the World Wide Web in order to promote SQL standards. *DISCLAIMER: *This program was reviewed by employees of NIST for *conformance to the SQL standards. *NIST assumes no responsibility for any party's use of *this program. **************************************************************** * * COMMENT SECTION * * SQL VALIDATION TEST SUITE V6.0 * * YTS792.PCO * WRITTEN BY: Susan Watters * TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE * * GRANT USAGE on character set, WITH GRANT OPTION * * * REFERENCES * 11.28 * 11.36 * 10.3 * 11.3 * 11.4 * 16.4 * F#45 Character set definition * F#25 Domain definition * F#32 User authorisation * F#3 Basic schema manipulation * F#2 Basic Information Schema * * DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test * * QA Status: Full FC * * Revised by DWF 1996-03-22 * Added rollback after authid * Fixed charset usage * Fixed bad schema refs * Fixed SDL transactions **************************************************************** EXEC SQL BEGIN DECLARE SECTION END-EXEC 01 SQLCODE PIC S9(9) COMP. 01 SQLSTATE PIC X(5). 01 co PIC S9(4) DISPLAY SIGN LEADING SEPARATE. 01 uid PIC X(18). 01 uidx PIC X(18). EXEC SQL END DECLARE SECTION END-EXEC 01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 ALPNUM-TABLE VALUE IS "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ". 05 ALPNUM PIC X OCCURS 36 TIMES. 01 NORMSQ. 05 NORMSQX PIC X OCCURS 5 TIMES. 01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE. *date_time declaration 01 TO-DAY PIC 9(6). 01 THE-TIME PIC 9(8). 01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE. 01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE. PROCEDURE DIVISION. P0. MOVE "CTS4 " TO uid CALL "AUTHID" USING uid MOVE "not logged in, not" TO uidx EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO END-EXEC MOVE SQLCODE TO SQL-COD EXEC SQL ROLLBACK WORK END-EXEC MOVE SQLCODE TO SQL-COD if (uid NOT = uidx) then DISPLAY "ERROR: User ", uid, " expected. User ", uidx, " - " connected" STOP RUN END-IF MOVE 0 TO errcnt DISPLAY "SQL Test Suite, V6.0, Embedded COBOL, yts792.pco" DISPLAY "59-byte ID" DISPLAY "TEd Version #" *date_time print ACCEPT TO-DAY FROM DATE ACCEPT THE-TIME FROM TIME DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME ******************** BEGIN TEST7526 ******************* MOVE 1 TO flag DISPLAY " TEST7526 " DISPLAY " GRANT USAGE on character set,WITH GRANT OPTION" DISPLAY "References:" DISPLAY " 11.28 " DISPLAY " 11.36 " DISPLAY " 10.3 " DISPLAY " 11.3
" DISPLAY " 11.4 " DISPLAY " 16.4 " DISPLAY " F#45 Character set definition" DISPLAY " F#25 Domain definition" DISPLAY " F#32 User authorisation" DISPLAY " F#3 Basic schema manipulation" DISPLAY " F#2 Basic information schema" DISPLAY " - - - - - - - - - - - - - - - - - - -" COMPUTE SQLCODE = -1 MOVE "xxxxx" TO SQLSTATE DISPLAY "This program is the third in a set of three" DISPLAY "which checks GRANT USAGE on char set WITH GRANT - " OPTION" DISPLAY " " *create domain using character set DISPLAY "CREATE DOMAIN CD CHAR(3) CHARACTER SET CTS1.CS;" EXEC SQL CREATE DOMAIN CD CHAR(3) CHARACTER SET CTS1.CS END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *check domain created correctly MOVE 0 TO co DISPLAY "SELECT COUNT (*) INTO :co" DISPLAY "FROM INFORMATION_SCHEMA.DOMAINS" DISPLAY "WHERE DOMAIN_NAME = 'CD'" DISPLAY "AND DOMAIN_SCHEMA = 'CTS4';" EXEC SQL SELECT COUNT (*) INTO :co FROM INFORMATION_SCHEMA.DOMAINS WHERE DOMAIN_NAME = 'CD' AND DOMAIN_SCHEMA = 'CTS4' END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "co should be 1; its value is ", co if (co NOT = 1) then MOVE 0 TO flag END-IF DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *create table referencing domain in a column descriptor DISPLAY "CREATE TABLE TC" DISPLAY "( TCC CD);" EXEC SQL CREATE TABLE TC ( TCC CD) END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " *reinitialise variable MOVE 0 TO co *insert value into table DISPLAY "INSERT INTO TC VALUES (_CTS1.CS 'ghi');" EXEC SQL INSERT INTO TC VALUES (_CTS1.CS 'ghi') END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "SELECT COUNT (*) INTO :co FROM TC;" EXEC SQL SELECT COUNT (*) INTO :co FROM TC END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY "co should be 1; its value is ", co if (co NOT = 1) then MOVE 0 TO flag END-IF DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP TABLE TC CASCADE;" EXEC SQL DROP TABLE TC CASCADE END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "DROP DOMAIN CD CASCADE;" EXEC SQL DROP DOMAIN CD CASCADE END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " DISPLAY "COMMIT WORK;" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD PERFORM CHCKOK DISPLAY " " if ( flag = 1 ) then DISPLAY " yts792.pco *** pass *** " EXEC SQL INSERT INTO CTS1.TESTREPORT VALUES('7526','pass','PCO') END-EXEC MOVE SQLCODE TO SQL-COD else DISPLAY " yts792.pco *** fail *** " EXEC SQL INSERT INTO CTS1.TESTREPORT VALUES('7526','fail','PCO') END-EXEC MOVE SQLCODE TO SQL-COD COMPUTE errcnt = errcnt + 1 END-IF DISPLAY "===============================================" EXEC SQL COMMIT WORK END-EXEC MOVE SQLCODE TO SQL-COD ******************** END TEST7526 ******************** **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0 STOP RUN. * **** Procedures for PERFORM statements *Test SQLCODE and SQLSTATE for normal completion. CHCKOK. DISPLAY "SQLCODE should be 0; its value is ", SQL-COD DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then MOVE 0 TO flag END-IF if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE) then DISPLAY "Valid implementation-defined SQLSTATE accepted." END-IF . NOSUBCLASS. *This routine replaces valid implementation-defined *subclasses with 000. This replacement equates valid *implementation-defined subclasses with the 000 value *expected by the test case; otherwise the test will fail. *After calling NOSUBCLASS, NORMSQ will be tested * SQLSTATE will be printed. MOVE SQLSTATE TO NORMSQ MOVE 3 TO norm1 *subclass begins in position 3 of char array NORMSQ *valid subclass begins with 5-9, I-Z, end of ALPNUM table PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *Quit if NORMSQ is unchanged. Subclass is not impl.-def. *Changed NORMSQ means implementation-defined subclass, *so proceed to zero it out, if valid (0-9,A-Z) if (NORMSQ = SQLSTATE) then GO TO EXIT-NOSUBCLASS END-IF MOVE 4 TO norm1 *examining position 4 of char array NORMSQ *valid characters are 0-9, A-Z PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM MOVE 5 TO norm1 *valid characters are 0-9, A-Z *examining position 5 of char array NORMSQ PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36 if (NORMSQX(norm1) = ALPNUM(norm2)) then MOVE "0" TO NORMSQX(norm1) END-IF END-PERFORM *implementation-defined subclasses are allowed for warnings *(class = 01). These equate to successful completion *SQLSTATE values of 00000. *Reference SQL-92 4.28 SQL-transactions, paragraph 2 if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then MOVE "0" TO NORMSQX(2) END-IF . EXIT-NOSUBCLASS. EXIT.

                                                                                                                                                                                                                                                                                                                                                                                                     

Neuigkeiten

     Aktuelles
     Motto des Tages

Open Source Software

     Quellcodebibliothek
     Eigene Quellcodes
     Fremde Quellcodes
     Suchen
Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik
Statistik
#Sources=1126438
#Domains=1897691