// SPDX-License-Identifier: GPL-2.0-only
#include <linux/sched/debug.h>
#include "sched.h"
/*
* The implementation of the wait_bit * ( ) and related waiting APIs :
*/
#define WAIT_TABLE_BITS 8
#define WAIT_TABLE_SIZE (1 << WAIT_TABLE_BITS)
static wait_queue_head_t bit_wait_table[WAIT_TABLE_SIZE] __cacheline_aligned;
wait_queue_head_t *bit_waitqueue(unsigned long *word, int bit)
{
const int shift = BITS_PER_LONG == 32 ? 5 : 6 ;
unsigned long val = (unsigned long )word << shift | bit;
return bit_wait_table + hash_long(val, WAIT_TABLE_BITS);
}
EXPORT_SYMBOL(bit_waitqueue);
int wake_bit_function(struct wait_queue_entry *wq_entry, unsigned mode, int sync, void *arg)
{
struct wait_bit_key *key = arg;
struct wait_bit_queue_entry *wait_bit = container_of(wq_entry, struct wait_bit_queue_entry, wq_entry);
if (wait_bit->key.flags != key->flags ||
wait_bit->key.bit_nr != key->bit_nr ||
test_bit(key->bit_nr, key->flags))
return 0 ;
return autoremove_wake_function(wq_entry, mode, sync, key);
}
EXPORT_SYMBOL(wake_bit_function);
/*
* To allow interruptible waiting and asynchronous ( i . e . non - blocking )
* waiting , the actions of _ _ wait_on_bit ( ) and _ _ wait_on_bit_lock ( ) are
* permitted return codes . Nonzero return codes halt waiting and return .
*/
int __sched
__wait_on_bit(struct wait_queue_head *wq_head, struct wait_bit_queue_entry *wbq_entry,
wait_bit_action_f *action, unsigned mode)
{
int ret = 0 ;
do {
prepare_to_wait(wq_head, &wbq_entry->wq_entry, mode);
if (test_bit(wbq_entry->key.bit_nr, wbq_entry->key.flags))
ret = (*action)(&wbq_entry->key, mode);
} while (test_bit_acquire(wbq_entry->key.bit_nr, wbq_entry->key.flags) && !ret);
finish_wait(wq_head, &wbq_entry->wq_entry);
return ret;
}
EXPORT_SYMBOL(__wait_on_bit);
int __sched out_of_line_wait_on_bit(unsigned long *word, int bit,
wait_bit_action_f *action, unsigned mode)
{
struct wait_queue_head *wq_head = bit_waitqueue(word, bit);
DEFINE_WAIT_BIT(wq_entry, word, bit);
return __wait_on_bit(wq_head, &wq_entry, action, mode);
}
EXPORT_SYMBOL(out_of_line_wait_on_bit);
int __sched out_of_line_wait_on_bit_timeout(
unsigned long *word, int bit, wait_bit_action_f *action,
unsigned mode, unsigned long timeout)
{
struct wait_queue_head *wq_head = bit_waitqueue(word, bit);
DEFINE_WAIT_BIT(wq_entry, word, bit);
wq_entry.key.timeout = jiffies + timeout;
return __wait_on_bit(wq_head, &wq_entry, action, mode);
}
EXPORT_SYMBOL_GPL(out_of_line_wait_on_bit_timeout);
int __sched
__wait_on_bit_lock(struct wait_queue_head *wq_head, struct wait_bit_queue_entry *wbq_entry,
wait_bit_action_f *action, unsigned mode)
{
int ret = 0 ;
for (;;) {
prepare_to_wait_exclusive(wq_head, &wbq_entry->wq_entry, mode);
if (test_bit(wbq_entry->key.bit_nr, wbq_entry->key.flags)) {
ret = action(&wbq_entry->key, mode);
/*
* See the comment in prepare_to_wait_event ( ) .
* finish_wait ( ) does not necessarily takes wwq_head - > lock ,
* but test_and_set_bit ( ) implies mb ( ) which pairs with
* smp_mb__after_atomic ( ) before wake_up_page ( ) .
*/
if (ret)
finish_wait(wq_head, &wbq_entry->wq_entry);
}
if (!test_and_set_bit(wbq_entry->key.bit_nr, wbq_entry->key.flags)) {
if (!ret)
finish_wait(wq_head, &wbq_entry->wq_entry);
return 0 ;
} else if (ret) {
return ret;
}
}
}
EXPORT_SYMBOL(__wait_on_bit_lock);
int __sched out_of_line_wait_on_bit_lock(unsigned long *word, int bit,
wait_bit_action_f *action, unsigned mode)
{
struct wait_queue_head *wq_head = bit_waitqueue(word, bit);
DEFINE_WAIT_BIT(wq_entry, word, bit);
return __wait_on_bit_lock(wq_head, &wq_entry, action, mode);
}
EXPORT_SYMBOL(out_of_line_wait_on_bit_lock);
void __wake_up_bit(struct wait_queue_head *wq_head, unsigned long *word, int bit)
{
struct wait_bit_key key = __WAIT_BIT_KEY_INITIALIZER(word, bit);
if (waitqueue_active(wq_head))
__wake_up(wq_head, TASK_NORMAL, 1 , &key);
}
EXPORT_SYMBOL(__wake_up_bit);
/**
* wake_up_bit - wake up waiters on a bit
* @ word : the address containing the bit being waited on
* @ bit : the bit at that address being waited on
*
* Wake up any process waiting in wait_on_bit ( ) or similar for the
* given bit to be cleared .
*
* The wake - up is sent to tasks in a waitqueue selected by hash from a
* shared pool . Only those tasks on that queue which have requested
* wake_up on this specific address and bit will be woken , and only if the
* bit is clear .
*
* In order for this to function properly there must be a full memory
* barrier after the bit is cleared and before this function is called .
* If the bit was cleared atomically , such as a by clear_bit ( ) then
* smb_mb__after_atomic ( ) can be used , othwewise smb_mb ( ) is needed .
* If the bit was cleared with a fully - ordered operation , no further
* barrier is required .
*
* Normally the bit should be cleared by an operation with RELEASE
* semantics so that any changes to memory made before the bit is
* cleared are guaranteed to be visible after the matching wait_on_bit ( )
* completes .
*/
void wake_up_bit(unsigned long *word, int bit)
{
__wake_up_bit(bit_waitqueue(word, bit), word, bit);
}
EXPORT_SYMBOL(wake_up_bit);
wait_queue_head_t *__var_waitqueue(void *p)
{
return bit_wait_table + hash_ptr(p, WAIT_TABLE_BITS);
}
EXPORT_SYMBOL(__var_waitqueue);
static int
var_wake_function(struct wait_queue_entry *wq_entry, unsigned int mode,
int sync, void *arg)
{
struct wait_bit_key *key = arg;
struct wait_bit_queue_entry *wbq_entry =
container_of(wq_entry, struct wait_bit_queue_entry, wq_entry);
if (wbq_entry->key.flags != key->flags ||
wbq_entry->key.bit_nr != key->bit_nr)
return 0 ;
return autoremove_wake_function(wq_entry, mode, sync, key);
}
void init_wait_var_entry(struct wait_bit_queue_entry *wbq_entry, void *var, int flags)
{
*wbq_entry = (struct wait_bit_queue_entry){
.key = {
.flags = (var),
.bit_nr = -1 ,
},
.wq_entry = {
.flags = flags,
.private = current,
.func = var_wake_function,
.entry = LIST_HEAD_INIT(wbq_entry->wq_entry.entry),
},
};
}
EXPORT_SYMBOL(init_wait_var_entry);
/**
* wake_up_var - wake up waiters on a variable ( kernel address )
* @ var : the address of the variable being waited on
*
* Wake up any process waiting in wait_var_event ( ) or similar for the
* given variable to change . wait_var_event ( ) can be waiting for an
* arbitrary condition to be true and associates that condition with an
* address . Calling wake_up_var ( ) suggests that the condition has been
* made true , but does not strictly require the condtion to use the
* address given .
*
* The wake - up is sent to tasks in a waitqueue selected by hash from a
* shared pool . Only those tasks on that queue which have requested
* wake_up on this specific address will be woken .
*
* In order for this to function properly there must be a full memory
* barrier after the variable is updated ( or more accurately , after the
* condition waited on has been made to be true ) and before this function
* is called . If the variable was updated atomically , such as a by
* atomic_dec ( ) then smb_mb__after_atomic ( ) can be used . If the
* variable was updated by a fully ordered operation such as
* atomic_dec_and_test ( ) then no extra barrier is required . Otherwise
* smb_mb ( ) is needed .
*
* Normally the variable should be updated ( the condition should be made
* to be true ) by an operation with RELEASE semantics such as
* smp_store_release ( ) so that any changes to memory made before the
* variable was updated are guaranteed to be visible after the matching
* wait_var_event ( ) completes .
*/
void wake_up_var(void *var)
{
__wake_up_bit(__var_waitqueue(var), var, -1 );
}
EXPORT_SYMBOL(wake_up_var);
__sched int bit_wait(struct wait_bit_key *word, int mode)
{
schedule();
if (signal_pending_state(mode, current))
return -EINTR;
return 0 ;
}
EXPORT_SYMBOL(bit_wait);
__sched int bit_wait_io(struct wait_bit_key *word, int mode)
{
io_schedule();
if (signal_pending_state(mode, current))
return -EINTR;
return 0 ;
}
EXPORT_SYMBOL(bit_wait_io);
__sched int bit_wait_timeout(struct wait_bit_key *word, int mode)
{
unsigned long now = READ_ONCE(jiffies);
if (time_after_eq(now, word->timeout))
return -EAGAIN;
schedule_timeout(word->timeout - now);
if (signal_pending_state(mode, current))
return -EINTR;
return 0 ;
}
EXPORT_SYMBOL_GPL(bit_wait_timeout);
void __init wait_bit_init(void )
{
int i;
for (i = 0 ; i < WAIT_TABLE_SIZE; i++)
init_waitqueue_head(bit_wait_table + i);
}
Messung V0.5 in Prozent C=98 H=94 G=95
¤ Dauer der Verarbeitung: 0.11 Sekunden
(vorverarbeitet am 2026-09-28)
¤
*© Formatika GbR, Deutschland