/* SPDX-License-Identifier: GPL-2.0 */ /* * Board initialization code should put one of these into dev - > platform_data * and place the isp116x onto platform_bus . #ifndef __LINUX_USB_ISP116X_H#define __LINUX_USB_ISP116X_Hstruct isp116x_platform_data {/* Enable internal resistors on downstream ports */ unsigned sel15Kres:1 ;/* On-chip overcurrent detection */ unsigned oc_enable:1 ;/* INT output polarity */ unsigned int_act_high:1 ;/* INT edge or level triggered */ unsigned int_edge_triggered:1 ;/* Enable wakeup by devices on usb bus (e.g. wakeup by attachment / detachment or by device activity such as moving a mouse ) . When chosen , this option prevents stopping internal clock , increasing unsigned remote_wakeup_enable:1 ;/* Inter-io delay (ns). The chip is picky about access timings; it expects at least : 150 ns delay between consecutive accesses to DATA_REG , 300 ns delay between access to ADDR_REG and DATA_REG OE , WE MUST NOT be changed during these intervals void (*delay) (struct device *dev, int delay);#endif /* __LINUX_USB_ISP116X_H */
Messung V0.5 in Prozent C=76 H=100 G=88
¤ Dauer der Verarbeitung: 0.9 Sekunden
(vorverarbeitet am 2026-10-01)
¤ *© Formatika GbR, Deutschland
