Quelle dpcsup.c
Sprache: C
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Adaptec AAC series RAID controller driver
* ( c ) Copyright 2001 Red Hat Inc .
*
* based on the old aacraid driver that is . .
* Adaptec aacraid device driver for Linux .
*
* Copyright ( c ) 2000 - 2010 Adaptec , Inc .
* 2010 - 2015 PMC - Sierra , Inc . ( aacraid @ pmc - sierra . com )
* 2016 - 2017 Microsemi Corp . ( aacraid @ microsemi . com )
*
* Module Name :
* dpcsup . c
*
* Abstract : All DPC processing routines for the cyclone board occur here .
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/completion.h>
#include <linux/blkdev.h>
#include "aacraid.h"
/**
* aac_response_normal - Handle command replies
* @ q : Queue to read from
*
* This DPC routine will be run when the adapter interrupts us to let us
* know there is a response on our normal priority queue . We will pull off
* all QE there are and wake up all the waiters before exiting . We will
* take a spinlock out on the queue before operating on it .
*/
unsigned int aac_response_normal(struct aac_queue * q)
{
struct aac_dev * dev = q->dev;
struct aac_entry *entry;
struct hw_fib * hwfib;
struct fib * fib;
int consumed = 0 ;
unsigned long flags, mflags;
spin_lock_irqsave(q->lock, flags);
/*
* Keep pulling response QEs off the response queue and waking
* up the waiters until there are no more QEs . We then return
* back to the system . If no response was requested we just
* deallocate the Fib here and continue .
*/
while (aac_consumer_get(dev, q, &entry))
{
int fast;
u32 index = le32_to_cpu(entry->addr);
fast = index & 0 x01;
fib = &dev->fibs[index >> 2 ];
hwfib = fib->hw_fib_va;
aac_consumer_free(dev, q, HostNormRespQueue);
/*
* Remove this fib from the Outstanding I / O queue .
* But only if it has not already been timed out .
*
* If the fib has been timed out already , then just
* continue . The caller has already been notified that
* the fib timed out .
*/
atomic_dec(&dev->queues->queue[AdapNormCmdQueue].numpending);
if (unlikely(fib->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) {
spin_unlock_irqrestore(q->lock, flags);
aac_fib_complete(fib);
aac_fib_free(fib);
spin_lock_irqsave(q->lock, flags);
continue ;
}
spin_unlock_irqrestore(q->lock, flags);
if (fast) {
/*
* Doctor the fib
*/
*(__le32 *)hwfib->data = cpu_to_le32(ST_OK);
hwfib->header.XferState |= cpu_to_le32(AdapterProcessed);
fib->flags |= FIB_CONTEXT_FLAG_FASTRESP;
}
FIB_COUNTER_INCREMENT(aac_config.FibRecved);
if (hwfib->header.Command == cpu_to_le16(NuFileSystem))
{
__le32 *pstatus = (__le32 *)hwfib->data;
if (*pstatus & cpu_to_le32(0 xffff0000))
*pstatus = cpu_to_le32(ST_OK);
}
if (hwfib->header.XferState & cpu_to_le32(NoResponseExpected | Async))
{
if (hwfib->header.XferState & cpu_to_le32(NoResponseExpected)) {
FIB_COUNTER_INCREMENT(aac_config.NoResponseRecved);
} else {
FIB_COUNTER_INCREMENT(aac_config.AsyncRecved);
}
/*
* NOTE : we cannot touch the fib after this
* call , because it may have been deallocated .
*/
fib->callback(fib->callback_data, fib);
} else {
unsigned long flagv;
spin_lock_irqsave(&fib->event_lock, flagv);
if (!fib->done) {
fib->done = 1 ;
complete(&fib->event_wait);
}
spin_unlock_irqrestore(&fib->event_lock, flagv);
spin_lock_irqsave(&dev->manage_lock, mflags);
dev->management_fib_count--;
spin_unlock_irqrestore(&dev->manage_lock, mflags);
FIB_COUNTER_INCREMENT(aac_config.NormalRecved);
if (fib->done == 2 ) {
spin_lock_irqsave(&fib->event_lock, flagv);
fib->done = 0 ;
spin_unlock_irqrestore(&fib->event_lock, flagv);
aac_fib_complete(fib);
aac_fib_free(fib);
}
}
consumed++;
spin_lock_irqsave(q->lock, flags);
}
if (consumed > aac_config.peak_fibs)
aac_config.peak_fibs = consumed;
if (consumed == 0 )
aac_config.zero_fibs++;
spin_unlock_irqrestore(q->lock, flags);
return 0 ;
}
/**
* aac_command_normal - handle commands
* @ q : queue to process
*
* This DPC routine will be queued when the adapter interrupts us to
* let us know there is a command on our normal priority queue . We will
* pull off all QE there are and wake up all the waiters before exiting .
* We will take a spinlock out on the queue before operating on it .
*/
unsigned int aac_command_normal(struct aac_queue *q)
{
struct aac_dev * dev = q->dev;
struct aac_entry *entry;
unsigned long flags;
spin_lock_irqsave(q->lock, flags);
/*
* Keep pulling response QEs off the response queue and waking
* up the waiters until there are no more QEs . We then return
* back to the system .
*/
while (aac_consumer_get(dev, q, &entry))
{
struct fib fibctx;
struct hw_fib * hw_fib;
u32 index;
struct fib *fib = &fibctx;
index = le32_to_cpu(entry->addr) / sizeof (struct hw_fib);
hw_fib = &dev->aif_base_va[index];
/*
* Allocate a FIB at all costs . For non queued stuff
* we can just use the stack so we are happy . We need
* a fib object in order to manage the linked lists
*/
if (dev->aif_thread)
if ((fib = kmalloc(sizeof (struct fib), GFP_ATOMIC)) == NULL)
fib = &fibctx;
memset(fib, 0 , sizeof (struct fib));
INIT_LIST_HEAD(&fib->fiblink);
fib->type = FSAFS_NTC_FIB_CONTEXT;
fib->size = sizeof (struct fib);
fib->hw_fib_va = hw_fib;
fib->data = hw_fib->data;
fib->dev = dev;
if (dev->aif_thread && fib != &fibctx) {
list_add_tail(&fib->fiblink, &q->cmdq);
aac_consumer_free(dev, q, HostNormCmdQueue);
wake_up_interruptible(&q->cmdready);
} else {
aac_consumer_free(dev, q, HostNormCmdQueue);
spin_unlock_irqrestore(q->lock, flags);
/*
* Set the status of this FIB
*/
*(__le32 *)hw_fib->data = cpu_to_le32(ST_OK);
aac_fib_adapter_complete(fib, sizeof (u32));
spin_lock_irqsave(q->lock, flags);
}
}
spin_unlock_irqrestore(q->lock, flags);
return 0 ;
}
/*
*
* aac_aif_callback
* @ context : the context set in the fib - here it is scsi cmd
* @ fibptr : pointer to the fib
*
* Handles the AIFs - new method ( SRC )
*
*/
static void aac_aif_callback(void *context, struct fib * fibptr)
{
struct fib *fibctx;
struct aac_dev *dev;
struct aac_aifcmd *cmd;
fibctx = (struct fib *)context;
BUG_ON(fibptr == NULL);
dev = fibptr->dev;
if ((fibptr->hw_fib_va->header.XferState &
cpu_to_le32(NoMoreAifDataAvailable)) ||
dev->sa_firmware) {
aac_fib_complete(fibptr);
aac_fib_free(fibptr);
return ;
}
aac_intr_normal(dev, 0 , 1 , 0 , fibptr->hw_fib_va);
aac_fib_init(fibctx);
cmd = (struct aac_aifcmd *) fib_data(fibctx);
cmd->command = cpu_to_le32(AifReqEvent);
aac_fib_send(AifRequest,
fibctx,
sizeof (struct hw_fib)-sizeof (struct aac_fibhdr),
FsaNormal,
0 , 1 ,
(fib_callback)aac_aif_callback, fibctx);
}
/*
* aac_intr_normal - Handle command replies
* @ dev : Device
* @ index : completion reference
*
* This DPC routine will be run when the adapter interrupts us to let us
* know there is a response on our normal priority queue . We will pull off
* all QE there are and wake up all the waiters before exiting .
*/
unsigned int aac_intr_normal(struct aac_dev *dev, u32 index, int isAif,
int isFastResponse, struct hw_fib *aif_fib)
{
unsigned long mflags;
dprintk((KERN_INFO "aac_intr_normal(%p,%x)\n" , dev, index));
if (isAif == 1 ) { /* AIF - common */
struct hw_fib * hw_fib;
struct fib * fib;
struct aac_queue *q = &dev->queues->queue[HostNormCmdQueue];
unsigned long flags;
/*
* Allocate a FIB . For non queued stuff we can just use
* the stack so we are happy . We need a fib object in order to
* manage the linked lists .
*/
if ((!dev->aif_thread)
|| (!(fib = kzalloc(sizeof (struct fib),GFP_ATOMIC))))
return 1 ;
if (!(hw_fib = kzalloc(sizeof (struct hw_fib),GFP_ATOMIC))) {
kfree (fib);
return 1 ;
}
if (dev->sa_firmware) {
fib->hbacmd_size = index; /* store event type */
} else if (aif_fib != NULL) {
memcpy(hw_fib, aif_fib, sizeof (struct hw_fib));
} else {
memcpy(hw_fib, (struct hw_fib *)
(((uintptr_t)(dev->regs.sa)) + index),
sizeof (struct hw_fib));
}
INIT_LIST_HEAD(&fib->fiblink);
fib->type = FSAFS_NTC_FIB_CONTEXT;
fib->size = sizeof (struct fib);
fib->hw_fib_va = hw_fib;
fib->data = hw_fib->data;
fib->dev = dev;
spin_lock_irqsave(q->lock, flags);
list_add_tail(&fib->fiblink, &q->cmdq);
wake_up_interruptible(&q->cmdready);
spin_unlock_irqrestore(q->lock, flags);
return 1 ;
} else if (isAif == 2 ) { /* AIF - new (SRC) */
struct fib *fibctx;
struct aac_aifcmd *cmd;
fibctx = aac_fib_alloc(dev);
if (!fibctx)
return 1 ;
aac_fib_init(fibctx);
cmd = (struct aac_aifcmd *) fib_data(fibctx);
cmd->command = cpu_to_le32(AifReqEvent);
return aac_fib_send(AifRequest,
fibctx,
sizeof (struct hw_fib)-sizeof (struct aac_fibhdr),
FsaNormal,
0 , 1 ,
(fib_callback)aac_aif_callback, fibctx);
} else {
struct fib *fib = &dev->fibs[index];
int start_callback = 0 ;
/*
* Remove this fib from the Outstanding I / O queue .
* But only if it has not already been timed out .
*
* If the fib has been timed out already , then just
* continue . The caller has already been notified that
* the fib timed out .
*/
atomic_dec(&dev->queues->queue[AdapNormCmdQueue].numpending);
if (unlikely(fib->flags & FIB_CONTEXT_FLAG_TIMED_OUT)) {
aac_fib_complete(fib);
aac_fib_free(fib);
return 0 ;
}
FIB_COUNTER_INCREMENT(aac_config.FibRecved);
if (fib->flags & FIB_CONTEXT_FLAG_NATIVE_HBA) {
if (isFastResponse)
fib->flags |= FIB_CONTEXT_FLAG_FASTRESP;
if (fib->callback) {
start_callback = 1 ;
} else {
unsigned long flagv;
int completed = 0 ;
dprintk((KERN_INFO "event_wait up\n" ));
spin_lock_irqsave(&fib->event_lock, flagv);
if (fib->done == 2 ) {
fib->done = 1 ;
completed = 1 ;
} else {
fib->done = 1 ;
complete(&fib->event_wait);
}
spin_unlock_irqrestore(&fib->event_lock, flagv);
spin_lock_irqsave(&dev->manage_lock, mflags);
dev->management_fib_count--;
spin_unlock_irqrestore(&dev->manage_lock,
mflags);
FIB_COUNTER_INCREMENT(aac_config.NativeRecved);
if (completed)
aac_fib_complete(fib);
}
} else {
struct hw_fib *hwfib = fib->hw_fib_va;
if (isFastResponse) {
/* Doctor the fib */
*(__le32 *)hwfib->data = cpu_to_le32(ST_OK);
hwfib->header.XferState |=
cpu_to_le32(AdapterProcessed);
fib->flags |= FIB_CONTEXT_FLAG_FASTRESP;
}
if (hwfib->header.Command ==
cpu_to_le16(NuFileSystem)) {
__le32 *pstatus = (__le32 *)hwfib->data;
if (*pstatus & cpu_to_le32(0 xffff0000))
*pstatus = cpu_to_le32(ST_OK);
}
if (hwfib->header.XferState &
cpu_to_le32(NoResponseExpected | Async)) {
if (hwfib->header.XferState & cpu_to_le32(
NoResponseExpected)) {
FIB_COUNTER_INCREMENT(
aac_config.NoResponseRecved);
} else {
FIB_COUNTER_INCREMENT(
aac_config.AsyncRecved);
}
start_callback = 1 ;
} else {
unsigned long flagv;
int completed = 0 ;
dprintk((KERN_INFO "event_wait up\n" ));
spin_lock_irqsave(&fib->event_lock, flagv);
if (fib->done == 2 ) {
fib->done = 1 ;
completed = 1 ;
} else {
fib->done = 1 ;
complete(&fib->event_wait);
}
spin_unlock_irqrestore(&fib->event_lock, flagv);
spin_lock_irqsave(&dev->manage_lock, mflags);
dev->management_fib_count--;
spin_unlock_irqrestore(&dev->manage_lock,
mflags);
FIB_COUNTER_INCREMENT(aac_config.NormalRecved);
if (completed)
aac_fib_complete(fib);
}
}
if (start_callback) {
/*
* NOTE : we cannot touch the fib after this
* call , because it may have been deallocated .
*/
if (likely(fib->callback && fib->callback_data)) {
fib->callback(fib->callback_data, fib);
} else {
aac_fib_complete(fib);
aac_fib_free(fib);
}
}
return 0 ;
}
}
Messung V0.5 in Prozent C=93 H=99 G=95
¤ Dauer der Verarbeitung: 0.2 Sekunden
(vorverarbeitet am 2026-09-29)
¤
*© Formatika GbR, Deutschland
2026-10-10
Neuigkeiten
Aktuelles
Motto des Tages
Open Source Software
Jenseits des Üblichen ....
Besucherstatistik
Statistik
#Sources=1126864
#Domains=1897691