// SPDX-License-Identifier: GPL-2.0
/*
* Copyright ( c ) 2022 MediaTek Inc .
* Author : Jianjun Wang < jianjun . wang @ mediatek . com >
*/
#include <linux/bitfield.h>
#include <linux/module.h>
#include <linux/nvmem-consumer.h>
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include "phy-mtk-io.h"
#define PEXTP_ANA_GLB_00_REG 0 x9000
/* Internal Resistor Selection of TX Bias Current */
#define EFUSE_GLB_INTR_SEL GENMASK(28 , 24 )
#define PEXTP_ANA_LN0_TRX_REG 0 xa000
#define PEXTP_ANA_TX_REG 0 x04
/* TX PMOS impedance selection */
#define EFUSE_LN_TX_PMOS_SEL GENMASK(5 , 2 )
/* TX NMOS impedance selection */
#define EFUSE_LN_TX_NMOS_SEL GENMASK(11 , 8 )
#define PEXTP_ANA_RX_REG 0 x3c
/* RX impedance selection */
#define EFUSE_LN_RX_SEL GENMASK(3 , 0 )
#define PEXTP_ANA_LANE_OFFSET 0 x100
/**
* struct mtk_pcie_lane_efuse - eFuse data for each lane
* @ tx_pmos : TX PMOS impedance selection data
* @ tx_nmos : TX NMOS impedance selection data
* @ rx_data : RX impedance selection data
* @ lane_efuse_supported : software eFuse data is supported for this lane
*/
struct mtk_pcie_lane_efuse {
u32 tx_pmos;
u32 tx_nmos;
u32 rx_data;
bool lane_efuse_supported;
};
/**
* struct mtk_pcie_phy_data - phy data for each SoC
* @ num_lanes : supported lane numbers
* @ sw_efuse_supported : support software to load eFuse data
*/
struct mtk_pcie_phy_data {
int num_lanes;
bool sw_efuse_supported;
};
/**
* struct mtk_pcie_phy - PCIe phy driver main structure
* @ dev : pointer to device
* @ phy : pointer to generic phy
* @ sif_base : IO mapped register base address of system interface
* @ data : pointer to SoC dependent data
* @ sw_efuse_en : software eFuse enable status
* @ efuse_glb_intr : internal resistor selection of TX bias current data
* @ efuse : pointer to eFuse data for each lane
*/
struct mtk_pcie_phy {
struct device *dev;
struct phy *phy;
void __iomem *sif_base;
const struct mtk_pcie_phy_data *data;
bool sw_efuse_en;
u32 efuse_glb_intr;
struct mtk_pcie_lane_efuse *efuse;
};
static void mtk_pcie_efuse_set_lane(struct mtk_pcie_phy *pcie_phy,
unsigned int lane)
{
struct mtk_pcie_lane_efuse *data = &pcie_phy->efuse[lane];
void __iomem *addr;
if (!data->lane_efuse_supported)
return ;
addr = pcie_phy->sif_base + PEXTP_ANA_LN0_TRX_REG +
lane * PEXTP_ANA_LANE_OFFSET;
mtk_phy_update_field(addr + PEXTP_ANA_TX_REG, EFUSE_LN_TX_PMOS_SEL,
data->tx_pmos);
mtk_phy_update_field(addr + PEXTP_ANA_TX_REG, EFUSE_LN_TX_NMOS_SEL,
data->tx_nmos);
mtk_phy_update_field(addr + PEXTP_ANA_RX_REG, EFUSE_LN_RX_SEL,
data->rx_data);
}
/**
* mtk_pcie_phy_init ( ) - Initialize the phy
* @ phy : the phy to be initialized
*
* Initialize the phy by setting the efuse data .
* The hardware settings will be reset during suspend , it should be
* reinitialized when the consumer calls phy_init ( ) again on resume .
*/
static int mtk_pcie_phy_init(struct phy *phy)
{
struct mtk_pcie_phy *pcie_phy = phy_get_drvdata(phy);
int i;
if (!pcie_phy->sw_efuse_en)
return 0 ;
/* Set global data */
mtk_phy_update_field(pcie_phy->sif_base + PEXTP_ANA_GLB_00_REG,
EFUSE_GLB_INTR_SEL, pcie_phy->efuse_glb_intr);
for (i = 0 ; i < pcie_phy->data->num_lanes; i++)
mtk_pcie_efuse_set_lane(pcie_phy, i);
return 0 ;
}
static const struct phy_ops mtk_pcie_phy_ops = {
.init = mtk_pcie_phy_init,
.owner = THIS_MODULE,
};
static int mtk_pcie_efuse_read_for_lane(struct mtk_pcie_phy *pcie_phy,
unsigned int lane)
{
struct mtk_pcie_lane_efuse *efuse = &pcie_phy->efuse[lane];
struct device *dev = pcie_phy->dev;
char efuse_id[16 ];
int ret;
snprintf(efuse_id, sizeof (efuse_id), "tx_ln%d_pmos" , lane);
ret = nvmem_cell_read_variable_le_u32(dev, efuse_id, &efuse->tx_pmos);
if (ret)
return dev_err_probe(dev, ret, "Failed to read %s\n" , efuse_id);
snprintf(efuse_id, sizeof (efuse_id), "tx_ln%d_nmos" , lane);
ret = nvmem_cell_read_variable_le_u32(dev, efuse_id, &efuse->tx_nmos);
if (ret)
return dev_err_probe(dev, ret, "Failed to read %s\n" , efuse_id);
snprintf(efuse_id, sizeof (efuse_id), "rx_ln%d" , lane);
ret = nvmem_cell_read_variable_le_u32(dev, efuse_id, &efuse->rx_data);
if (ret)
return dev_err_probe(dev, ret, "Failed to read %s\n" , efuse_id);
if (!(efuse->tx_pmos || efuse->tx_nmos || efuse->rx_data))
return dev_err_probe(dev, -EINVAL,
"No eFuse data found for lane%d, but dts enable it\n" ,
lane);
efuse->lane_efuse_supported = true ;
return 0 ;
}
static int mtk_pcie_read_efuse(struct mtk_pcie_phy *pcie_phy)
{
struct device *dev = pcie_phy->dev;
bool nvmem_enabled;
int ret, i;
/* nvmem data is optional */
nvmem_enabled = device_property_present(dev, "nvmem-cells" );
if (!nvmem_enabled)
return 0 ;
ret = nvmem_cell_read_variable_le_u32(dev, "glb_intr" ,
&pcie_phy->efuse_glb_intr);
if (ret)
return dev_err_probe(dev, ret, "Failed to read glb_intr\n" );
pcie_phy->sw_efuse_en = true ;
pcie_phy->efuse = devm_kzalloc(dev, pcie_phy->data->num_lanes *
sizeof (*pcie_phy->efuse), GFP_KERNEL);
if (!pcie_phy->efuse)
return -ENOMEM;
for (i = 0 ; i < pcie_phy->data->num_lanes; i++) {
ret = mtk_pcie_efuse_read_for_lane(pcie_phy, i);
if (ret)
return ret;
}
return 0 ;
}
static int mtk_pcie_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct phy_provider *provider;
struct mtk_pcie_phy *pcie_phy;
int ret;
pcie_phy = devm_kzalloc(dev, sizeof (*pcie_phy), GFP_KERNEL);
if (!pcie_phy)
return -ENOMEM;
pcie_phy->sif_base = devm_platform_ioremap_resource_byname(pdev, "sif" );
if (IS_ERR(pcie_phy->sif_base))
return dev_err_probe(dev, PTR_ERR(pcie_phy->sif_base),
"Failed to map phy-sif base\n" );
pcie_phy->phy = devm_phy_create(dev, dev->of_node, &mtk_pcie_phy_ops);
if (IS_ERR(pcie_phy->phy))
return dev_err_probe(dev, PTR_ERR(pcie_phy->phy),
"Failed to create PCIe phy\n" );
pcie_phy->dev = dev;
pcie_phy->data = of_device_get_match_data(dev);
if (!pcie_phy->data)
return dev_err_probe(dev, -EINVAL, "Failed to get phy data\n" );
if (pcie_phy->data->sw_efuse_supported) {
/*
* Failed to read the efuse data is not a fatal problem ,
* ignore the failure and keep going .
*/
ret = mtk_pcie_read_efuse(pcie_phy);
if (ret == -EPROBE_DEFER || ret == -ENOMEM)
return ret;
}
phy_set_drvdata(pcie_phy->phy, pcie_phy);
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (IS_ERR(provider))
return dev_err_probe(dev, PTR_ERR(provider),
"PCIe phy probe failed\n" );
return 0 ;
}
static const struct mtk_pcie_phy_data mt8195_data = {
.num_lanes = 2 ,
.sw_efuse_supported = true ,
};
static const struct of_device_id mtk_pcie_phy_of_match[] = {
{ .compatible = "mediatek,mt8195-pcie-phy" , .data = &mt8195_data },
{ },
};
MODULE_DEVICE_TABLE(of, mtk_pcie_phy_of_match);
static struct platform_driver mtk_pcie_phy_driver = {
.probe = mtk_pcie_phy_probe,
.driver = {
.name = "mtk-pcie-phy" ,
.of_match_table = mtk_pcie_phy_of_match,
},
};
module_platform_driver(mtk_pcie_phy_driver);
MODULE_DESCRIPTION("MediaTek PCIe PHY driver" );
MODULE_AUTHOR("Jianjun Wang <jianjun.wang@mediatek.com>" );
MODULE_LICENSE("GPL" );
Messung V0.5 in Prozent C=98 H=99 G=98
¤ Dauer der Verarbeitung: 0.9 Sekunden
(vorverarbeitet am 2026-09-28)
¤
*© Formatika GbR, Deutschland