// SPDX-License-Identifier: GPL-2.0-only
/*
* NXP Wireless LAN device driver : station RX data handling
*
* Copyright 2011 - 2020 NXP
*/
#include <uapi/linux/ipv6.h>
#include <net/ndisc.h>
#include "decl.h"
#include "ioctl.h"
#include "util.h"
#include "fw.h"
#include "main.h"
#include "11n_aggr.h"
#include "11n_rxreorder.h"
/* This function checks if a frame is IPv4 ARP or IPv6 Neighbour advertisement
* frame . If frame has both source and destination mac address as same , this
* function drops such gratuitous frames .
*/
static bool
mwifiex_discard_gratuitous_arp(struct mwifiex_private *priv,
struct sk_buff *skb)
{
const struct mwifiex_arp_eth_header *arp;
struct ethhdr *eth;
struct ipv6hdr *ipv6;
struct icmp6hdr *icmpv6;
eth = (struct ethhdr *)skb->data;
switch (ntohs(eth->h_proto)) {
case ETH_P_ARP:
arp = (void *)(skb->data + sizeof (struct ethhdr));
if (arp->hdr.ar_op == htons(ARPOP_REPLY) ||
arp->hdr.ar_op == htons(ARPOP_REQUEST)) {
if (!memcmp(arp->ar_sip, arp->ar_tip, 4 ))
return true ;
}
break ;
case ETH_P_IPV6:
ipv6 = (void *)(skb->data + sizeof (struct ethhdr));
icmpv6 = (void *)(skb->data + sizeof (struct ethhdr) +
sizeof (struct ipv6hdr));
if (NDISC_NEIGHBOUR_ADVERTISEMENT == icmpv6->icmp6_type) {
if (!memcmp(&ipv6->saddr, &ipv6->daddr,
sizeof (struct in6_addr)))
return true ;
}
break ;
default :
break ;
}
return false ;
}
/*
* This function processes the received packet and forwards it
* to kernel / upper layer .
*
* This function parses through the received packet and determines
* if it is a debug packet or normal packet .
*
* For non - debug packets , the function chops off unnecessary leading
* header bytes , reconstructs the packet as an ethernet frame or
* 802 . 2 / llc / snap frame as required , and sends it to kernel / upper layer .
*
* The completion callback is called after processing in complete .
*/
int mwifiex_process_rx_packet(struct mwifiex_private *priv,
struct sk_buff *skb)
{
int ret;
struct rx_packet_hdr *rx_pkt_hdr;
struct rxpd *local_rx_pd;
int hdr_chop;
struct ethhdr *eth;
u16 rx_pkt_off, rx_pkt_len;
u8 *offset;
u8 adj_rx_rate = 0 ;
local_rx_pd = (struct rxpd *) (skb->data);
rx_pkt_off = le16_to_cpu(local_rx_pd->rx_pkt_offset);
rx_pkt_len = le16_to_cpu(local_rx_pd->rx_pkt_length);
rx_pkt_hdr = (void *)local_rx_pd + rx_pkt_off;
if (sizeof (rx_pkt_hdr->eth803_hdr) + sizeof (rfc1042_header) +
rx_pkt_off > skb->len) {
mwifiex_dbg(priv->adapter, ERROR,
"wrong rx packet offset: len=%d, rx_pkt_off=%d\n" ,
skb->len, rx_pkt_off);
priv->stats.rx_dropped++;
dev_kfree_skb_any(skb);
return -1 ;
}
if (sizeof (*rx_pkt_hdr) + rx_pkt_off <= skb->len &&
((!memcmp(&rx_pkt_hdr->rfc1042_hdr, bridge_tunnel_header,
sizeof (bridge_tunnel_header))) ||
(!memcmp(&rx_pkt_hdr->rfc1042_hdr, rfc1042_header,
sizeof (rfc1042_header)) &&
ntohs(rx_pkt_hdr->rfc1042_hdr.snap_type) != ETH_P_AARP &&
ntohs(rx_pkt_hdr->rfc1042_hdr.snap_type) != ETH_P_IPX))) {
/*
* Replace the 803 header and rfc1042 header ( llc / snap ) with an
* EthernetII header , keep the src / dst and snap_type
* ( ethertype ) .
* The firmware only passes up SNAP frames converting
* all RX Data from 802 . 11 to 802 . 2 / LLC / SNAP frames .
* To create the Ethernet II , just move the src , dst address
* right before the snap_type .
*/
eth = (struct ethhdr *)
((u8 *) &rx_pkt_hdr->eth803_hdr
+ sizeof (rx_pkt_hdr->eth803_hdr) +
sizeof (rx_pkt_hdr->rfc1042_hdr)
- sizeof (rx_pkt_hdr->eth803_hdr.h_dest)
- sizeof (rx_pkt_hdr->eth803_hdr.h_source)
- sizeof (rx_pkt_hdr->rfc1042_hdr.snap_type));
memcpy(eth->h_source, rx_pkt_hdr->eth803_hdr.h_source,
sizeof (eth->h_source));
memcpy(eth->h_dest, rx_pkt_hdr->eth803_hdr.h_dest,
sizeof (eth->h_dest));
/* Chop off the rxpd + the excess memory from the 802.2/llc/snap
header that was removed. */
hdr_chop = (u8 *) eth - (u8 *) local_rx_pd;
} else {
/* Chop off the rxpd */
hdr_chop = (u8 *) &rx_pkt_hdr->eth803_hdr -
(u8 *) local_rx_pd;
}
/* Chop off the leading header bytes so the it points to the start of
either the reconstructed EthII frame or the 802.2/llc/snap frame */
skb_pull(skb, hdr_chop);
if (priv->hs2_enabled &&
mwifiex_discard_gratuitous_arp(priv, skb)) {
mwifiex_dbg(priv->adapter, INFO, "Bypassed Gratuitous ARP\n" );
dev_kfree_skb_any(skb);
return 0 ;
}
if (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) &&
ntohs(rx_pkt_hdr->eth803_hdr.h_proto) == ETH_P_TDLS) {
offset = (u8 *)local_rx_pd + rx_pkt_off;
mwifiex_process_tdls_action_frame(priv, offset, rx_pkt_len);
}
/* Only stash RX bitrate for unicast packets. */
if (likely(!is_multicast_ether_addr(rx_pkt_hdr->eth803_hdr.h_dest))) {
priv->rxpd_rate = local_rx_pd->rx_rate;
priv->rxpd_htinfo = local_rx_pd->ht_info;
}
if (GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_STA ||
GET_BSS_ROLE(priv) == MWIFIEX_BSS_ROLE_UAP) {
adj_rx_rate = mwifiex_adjust_data_rate(priv,
local_rx_pd->rx_rate,
local_rx_pd->ht_info);
mwifiex_hist_data_add(priv, adj_rx_rate, local_rx_pd->snr,
local_rx_pd->nf);
}
ret = mwifiex_recv_packet(priv, skb);
if (ret == -1 )
mwifiex_dbg(priv->adapter, ERROR,
"recv packet failed\n" );
return ret;
}
/*
* This function processes the received buffer .
*
* The function looks into the RxPD and performs sanity tests on the
* received buffer to ensure its a valid packet , before processing it
* further . If the packet is determined to be aggregated , it is
* de - aggregated accordingly . Non - unicast packets are sent directly to
* the kernel / upper layers . Unicast packets are handed over to the
* Rx reordering routine if 11 n is enabled .
*
* The completion callback is called after processing in complete .
*/
int mwifiex_process_sta_rx_packet(struct mwifiex_private *priv,
struct sk_buff *skb)
{
struct mwifiex_adapter *adapter = priv->adapter;
int ret = 0 ;
struct rxpd *local_rx_pd;
struct rx_packet_hdr *rx_pkt_hdr;
u8 ta[ETH_ALEN];
u16 rx_pkt_type, rx_pkt_offset, rx_pkt_length, seq_num;
struct mwifiex_sta_node *sta_ptr;
local_rx_pd = (struct rxpd *) (skb->data);
rx_pkt_type = le16_to_cpu(local_rx_pd->rx_pkt_type);
rx_pkt_offset = le16_to_cpu(local_rx_pd->rx_pkt_offset);
rx_pkt_length = le16_to_cpu(local_rx_pd->rx_pkt_length);
seq_num = le16_to_cpu(local_rx_pd->seq_num);
rx_pkt_hdr = (void *)local_rx_pd + rx_pkt_offset;
if ((rx_pkt_offset + rx_pkt_length) > skb->len ||
sizeof (rx_pkt_hdr->eth803_hdr) + rx_pkt_offset > skb->len) {
mwifiex_dbg(adapter, ERROR,
"wrong rx packet: len=%d, rx_pkt_offset=%d, rx_pkt_length=%d\n" ,
skb->len, rx_pkt_offset, rx_pkt_length);
priv->stats.rx_dropped++;
dev_kfree_skb_any(skb);
return ret;
}
if (rx_pkt_type == PKT_TYPE_MGMT) {
ret = mwifiex_process_mgmt_packet(priv, skb);
if (ret)
mwifiex_dbg(adapter, DATA, "Rx of mgmt packet failed" );
dev_kfree_skb_any(skb);
return ret;
}
/*
* If the packet is not an unicast packet then send the packet
* directly to os . Don ' t pass thru rx reordering
*/
if ((!IS_11N_ENABLED(priv) &&
!(ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) &&
!(local_rx_pd->flags & MWIFIEX_RXPD_FLAGS_TDLS_PACKET))) ||
!ether_addr_equal_unaligned(priv->curr_addr, rx_pkt_hdr->eth803_hdr.h_dest)) {
mwifiex_process_rx_packet(priv, skb);
return ret;
}
if (mwifiex_queuing_ra_based(priv) ||
(ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) &&
local_rx_pd->flags & MWIFIEX_RXPD_FLAGS_TDLS_PACKET)) {
memcpy(ta, rx_pkt_hdr->eth803_hdr.h_source, ETH_ALEN);
if (local_rx_pd->flags & MWIFIEX_RXPD_FLAGS_TDLS_PACKET &&
local_rx_pd->priority < MAX_NUM_TID) {
sta_ptr = mwifiex_get_sta_entry(priv, ta);
if (sta_ptr)
sta_ptr->rx_seq[local_rx_pd->priority] =
le16_to_cpu(local_rx_pd->seq_num);
mwifiex_auto_tdls_update_peer_signal(priv, ta,
local_rx_pd->snr,
local_rx_pd->nf);
}
} else {
if (rx_pkt_type != PKT_TYPE_BAR &&
local_rx_pd->priority < MAX_NUM_TID)
priv->rx_seq[local_rx_pd->priority] = seq_num;
memcpy(ta, priv->curr_bss_params.bss_descriptor.mac_address,
ETH_ALEN);
}
/* Reorder and send to OS */
ret = mwifiex_11n_rx_reorder_pkt(priv, seq_num, local_rx_pd->priority,
ta, (u8) rx_pkt_type, skb);
if (ret || (rx_pkt_type == PKT_TYPE_BAR))
dev_kfree_skb_any(skb);
if (ret)
priv->stats.rx_dropped++;
return ret;
}
Messung V0.5 in Prozent C=96 H=100 G=97
¤ Dauer der Verarbeitung: 0.17 Sekunden
(vorverarbeitet am 2026-10-02)
¤
*© Formatika GbR, Deutschland