Eine aufbereitete Darstellung der Quelle

 
     
 
 
Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 

Benutzer

Quelle  hw-me.c   Sprache: C

 

// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (c) 2003-2022, Intel Corporation. All rights reserved.
 * Intel Management Engine Interface (Intel MEI) Linux driver
 */


#include <linux/pci.h>

#include <linux/kthread.h>
#include <linux/interrupt.h>
#include <linux/pm_runtime.h>
#include <linux/sizes.h>
#include <linux/delay.h>

#include "mei_dev.h"
#include "hbm.h"

#include "hw-me.h"
#include "hw-me-regs.h"

#include "mei-trace.h"

/**
 * mei_me_reg_read - Reads 32bit data from the mei device
 *
 * @hw: the me hardware structure
 * @offset: offset from which to read the data
 *
 * Return: register value (u32)
 */

static inline u32 mei_me_reg_read(const struct mei_me_hw *hw,
          unsigned long offset)
{
 return ioread32(hw->mem_addr + offset);
}


/**
 * mei_me_reg_write - Writes 32bit data to the mei device
 *
 * @hw: the me hardware structure
 * @offset: offset from which to write the data
 * @value: register value to write (u32)
 */

static inline void mei_me_reg_write(const struct mei_me_hw *hw,
     unsigned long offset, u32 value)
{
 iowrite32(value, hw->mem_addr + offset);
}

/**
 * mei_me_mecbrw_read - Reads 32bit data from ME circular buffer
 *  read window register
 *
 * @dev: the device structure
 *
 * Return: ME_CB_RW register value (u32)
 */

static inline u32 mei_me_mecbrw_read(const struct mei_device *dev)
{
 return mei_me_reg_read(to_me_hw(dev), ME_CB_RW);
}

/**
 * mei_me_hcbww_write - write 32bit data to the host circular buffer
 *
 * @dev: the device structure
 * @data: 32bit data to be written to the host circular buffer
 */

static inline void mei_me_hcbww_write(struct mei_device *dev, u32 data)
{
 mei_me_reg_write(to_me_hw(dev), H_CB_WW, data);
}

/**
 * mei_me_mecsr_read - Reads 32bit data from the ME CSR
 *
 * @dev: the device structure
 *
 * Return: ME_CSR_HA register value (u32)
 */

static inline u32 mei_me_mecsr_read(const struct mei_device *dev)
{
 u32 reg;

 reg = mei_me_reg_read(to_me_hw(dev), ME_CSR_HA);
 trace_mei_reg_read(dev->dev, "ME_CSR_HA", ME_CSR_HA, reg);

 return reg;
}

/**
 * mei_hcsr_read - Reads 32bit data from the host CSR
 *
 * @dev: the device structure
 *
 * Return: H_CSR register value (u32)
 */

static inline u32 mei_hcsr_read(const struct mei_device *dev)
{
 u32 reg;

 reg = mei_me_reg_read(to_me_hw(dev), H_CSR);
 trace_mei_reg_read(dev->dev, "H_CSR", H_CSR, reg);

 return reg;
}

/**
 * mei_hcsr_write - writes H_CSR register to the mei device
 *
 * @dev: the device structure
 * @reg: new register value
 */

static inline void mei_hcsr_write(struct mei_device *dev, u32 reg)
{
 trace_mei_reg_write(dev->dev, "H_CSR", H_CSR, reg);
 mei_me_reg_write(to_me_hw(dev), H_CSR, reg);
}

/**
 * mei_hcsr_set - writes H_CSR register to the mei device,
 * and ignores the H_IS bit for it is write-one-to-zero.
 *
 * @dev: the device structure
 * @reg: new register value
 */

static inline void mei_hcsr_set(struct mei_device *dev, u32 reg)
{
 reg &= ~H_CSR_IS_MASK;
 mei_hcsr_write(dev, reg);
}

/**
 * mei_hcsr_set_hig - set host interrupt (set H_IG)
 *
 * @dev: the device structure
 */

static inline void mei_hcsr_set_hig(struct mei_device *dev)
{
 u32 hcsr;

 hcsr = mei_hcsr_read(dev) | H_IG;
 mei_hcsr_set(dev, hcsr);
}

/**
 * mei_me_d0i3c_read - Reads 32bit data from the D0I3C register
 *
 * @dev: the device structure
 *
 * Return: H_D0I3C register value (u32)
 */

static inline u32 mei_me_d0i3c_read(const struct mei_device *dev)
{
 u32 reg;

 reg = mei_me_reg_read(to_me_hw(dev), H_D0I3C);
 trace_mei_reg_read(dev->dev, "H_D0I3C", H_D0I3C, reg);

 return reg;
}

/**
 * mei_me_d0i3c_write - writes H_D0I3C register to device
 *
 * @dev: the device structure
 * @reg: new register value
 */

static inline void mei_me_d0i3c_write(struct mei_device *dev, u32 reg)
{
 trace_mei_reg_write(dev->dev, "H_D0I3C", H_D0I3C, reg);
 mei_me_reg_write(to_me_hw(dev), H_D0I3C, reg);
}

/**
 * mei_me_trc_status - read trc status register
 *
 * @dev: mei device
 * @trc: trc status register value
 *
 * Return: 0 on success, error otherwise
 */

static int mei_me_trc_status(struct mei_device *dev, u32 *trc)
{
 struct mei_me_hw *hw = to_me_hw(dev);

 if (!hw->cfg->hw_trc_supported)
  return -EOPNOTSUPP;

 *trc = mei_me_reg_read(hw, ME_TRC);
 trace_mei_reg_read(dev->dev, "ME_TRC", ME_TRC, *trc);

 return 0;
}

/**
 * mei_me_fw_status - read fw status register from pci config space
 *
 * @dev: mei device
 * @fw_status: fw status register values
 *
 * Return: 0 on success, error otherwise
 */

static int mei_me_fw_status(struct mei_device *dev,
       struct mei_fw_status *fw_status)
{
 struct mei_me_hw *hw = to_me_hw(dev);
 const struct mei_fw_status *fw_src = &hw->cfg->fw_status;
 int ret;
 int i;

 if (!fw_status || !hw->read_fws)
  return -EINVAL;

 fw_status->count = fw_src->count;
 for (i = 0; i < fw_src->count && i < MEI_FW_STATUS_MAX; i++) {
  ret = hw->read_fws(dev, fw_src->status[i],
       &fw_status->status[i]);
  trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HFS_X",
           fw_src->status[i],
           fw_status->status[i]);
  if (ret)
   return ret;
 }

 return 0;
}

/**
 * mei_me_hw_config - configure hw dependent settings
 *
 * @dev: mei device
 *
 * Return:
 *  * -EINVAL when read_fws is not set
 *  * 0 on success
 *
 */

static int mei_me_hw_config(struct mei_device *dev)
{
 struct mei_me_hw *hw = to_me_hw(dev);
 u32 hcsr, reg;

 if (WARN_ON(!hw->read_fws))
  return -EINVAL;

 /* Doesn't change in runtime */
 hcsr = mei_hcsr_read(dev);
 hw->hbuf_depth = (hcsr & H_CBD) >> 24;

 reg = 0;
 hw->read_fws(dev, PCI_CFG_HFS_1, ®);
 trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg);
 hw->d0i3_supported =
  ((reg & PCI_CFG_HFS_1_D0I3_MSK) == PCI_CFG_HFS_1_D0I3_MSK);

 hw->pg_state = MEI_PG_OFF;
 if (hw->d0i3_supported) {
  reg = mei_me_d0i3c_read(dev);
  if (reg & H_D0I3C_I3)
   hw->pg_state = MEI_PG_ON;
 }

 return 0;
}

/**
 * mei_me_pg_state  - translate internal pg state
 *   to the mei power gating state
 *
 * @dev:  mei device
 *
 * Return: MEI_PG_OFF if aliveness is on and MEI_PG_ON otherwise
 */

static inline enum mei_pg_state mei_me_pg_state(struct mei_device *dev)
{
 struct mei_me_hw *hw = to_me_hw(dev);

 return hw->pg_state;
}

static inline u32 me_intr_src(u32 hcsr)
{
 return hcsr & H_CSR_IS_MASK;
}

/**
 * me_intr_disable - disables mei device interrupts
 *      using supplied hcsr register value.
 *
 * @dev: the device structure
 * @hcsr: supplied hcsr register value
 */

static inline void me_intr_disable(struct mei_device *dev, u32 hcsr)
{
 hcsr &= ~H_CSR_IE_MASK;
 mei_hcsr_set(dev, hcsr);
}

/**
 * me_intr_clear - clear and stop interrupts
 *
 * @dev: the device structure
 * @hcsr: supplied hcsr register value
 */

static inline void me_intr_clear(struct mei_device *dev, u32 hcsr)
{
 if (me_intr_src(hcsr))
  mei_hcsr_write(dev, hcsr);
}

/**
 * mei_me_intr_clear - clear and stop interrupts
 *
 * @dev: the device structure
 */

static void mei_me_intr_clear(struct mei_device *dev)
{
 u32 hcsr = mei_hcsr_read(dev);

 me_intr_clear(dev, hcsr);
}
/**
 * mei_me_intr_enable - enables mei device interrupts
 *
 * @dev: the device structure
 */

static void mei_me_intr_enable(struct mei_device *dev)
{
 u32 hcsr;

 if (mei_me_hw_use_polling(to_me_hw(dev)))
  return;

 hcsr = mei_hcsr_read(dev) | H_CSR_IE_MASK;
 mei_hcsr_set(dev, hcsr);
}

/**
 * mei_me_intr_disable - disables mei device interrupts
 *
 * @dev: the device structure
 */

static void mei_me_intr_disable(struct mei_device *dev)
{
 u32 hcsr = mei_hcsr_read(dev);

 me_intr_disable(dev, hcsr);
}

/**
 * mei_me_synchronize_irq - wait for pending IRQ handlers
 *
 * @dev: the device structure
 */

static void mei_me_synchronize_irq(struct mei_device *dev)
{
 struct mei_me_hw *hw = to_me_hw(dev);

 if (mei_me_hw_use_polling(hw))
  return;

 synchronize_irq(hw->irq);
}

/**
 * mei_me_hw_reset_release - release device from the reset
 *
 * @dev: the device structure
 */

static void mei_me_hw_reset_release(struct mei_device *dev)
{
 u32 hcsr = mei_hcsr_read(dev);

 hcsr |= H_IG;
 hcsr &= ~H_RST;
 mei_hcsr_set(dev, hcsr);
}

/**
 * mei_me_host_set_ready - enable device
 *
 * @dev: mei device
 */

static void mei_me_host_set_ready(struct mei_device *dev)
{
 u32 hcsr = mei_hcsr_read(dev);

 if (!mei_me_hw_use_polling(to_me_hw(dev)))
  hcsr |= H_CSR_IE_MASK;

 hcsr |=  H_IG | H_RDY;
 mei_hcsr_set(dev, hcsr);
}

/**
 * mei_me_host_is_ready - check whether the host has turned ready
 *
 * @dev: mei device
 * Return: bool
 */

static bool mei_me_host_is_ready(struct mei_device *dev)
{
 u32 hcsr = mei_hcsr_read(dev);

 return (hcsr & H_RDY) == H_RDY;
}

/**
 * mei_me_hw_is_ready - check whether the me(hw) has turned ready
 *
 * @dev: mei device
 * Return: bool
 */

static bool mei_me_hw_is_ready(struct mei_device *dev)
{
 u32 mecsr = mei_me_mecsr_read(dev);

 return (mecsr & ME_RDY_HRA) == ME_RDY_HRA;
}

/**
 * mei_me_hw_is_resetting - check whether the me(hw) is in reset
 *
 * @dev: mei device
 * Return: bool
 */

static bool mei_me_hw_is_resetting(struct mei_device *dev)
{
 u32 mecsr = mei_me_mecsr_read(dev);

 return (mecsr & ME_RST_HRA) == ME_RST_HRA;
}

/**
 * mei_gsc_pxp_check - check for gsc firmware entering pxp mode
 *
 * @dev: the device structure
 */

static void mei_gsc_pxp_check(struct mei_device *dev)
{
 struct mei_me_hw *hw = to_me_hw(dev);
 u32 fwsts5 = 0;

 if (!kind_is_gsc(dev) && !kind_is_gscfi(dev))
  return;

 hw->read_fws(dev, PCI_CFG_HFS_5, &fwsts5);
 trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HFS_5", PCI_CFG_HFS_5, fwsts5);

 if ((fwsts5 & GSC_CFG_HFS_5_BOOT_TYPE_MSK) == GSC_CFG_HFS_5_BOOT_TYPE_PXP) {
  if (dev->gsc_reset_to_pxp == MEI_DEV_RESET_TO_PXP_DEFAULT)
   dev->gsc_reset_to_pxp = MEI_DEV_RESET_TO_PXP_PERFORMED;
 } else {
  dev->gsc_reset_to_pxp = MEI_DEV_RESET_TO_PXP_DEFAULT;
 }

 if (dev->pxp_mode == MEI_DEV_PXP_DEFAULT)
  return;

 if ((fwsts5 & GSC_CFG_HFS_5_BOOT_TYPE_MSK) == GSC_CFG_HFS_5_BOOT_TYPE_PXP) {
  dev_dbg(dev->dev, "pxp mode is ready 0x%08x\n", fwsts5);
  dev->pxp_mode = MEI_DEV_PXP_READY;
 } else {
  dev_dbg(dev->dev, "pxp mode is not ready 0x%08x\n", fwsts5);
 }
}

/**
 * mei_me_hw_ready_wait - wait until the me(hw) has turned ready
 *  or timeout is reached
 *
 * @dev: mei device
 * Return: 0 on success, error otherwise
 */

static int mei_me_hw_ready_wait(struct mei_device *dev)
{
 mutex_unlock(&dev->device_lock);
 wait_event_timeout(dev->wait_hw_ready,
   dev->recvd_hw_ready,
   dev->timeouts.hw_ready);
 mutex_lock(&dev->device_lock);
 if (!dev->recvd_hw_ready) {
  dev_err(dev->dev, "wait hw ready failed\n");
  return -ETIME;
 }

 mei_gsc_pxp_check(dev);

 mei_me_hw_reset_release(dev);
 dev->recvd_hw_ready = false;
 return 0;
}

/**
 * mei_me_check_fw_reset - check for the firmware reset error and exception conditions
 *
 * @dev: mei device
 */

static void mei_me_check_fw_reset(struct mei_device *dev)
{
 struct mei_fw_status fw_status;
 char fw_sts_str[MEI_FW_STATUS_STR_SZ] = {0};
 int ret;
 u32 fw_pm_event = 0;

 if (!dev->saved_fw_status_flag)
  goto end;

 if (dev->gsc_reset_to_pxp == MEI_DEV_RESET_TO_PXP_PERFORMED) {
  ret = mei_fw_status(dev, &fw_status);
  if (!ret) {
   fw_pm_event = fw_status.status[1] & PCI_CFG_HFS_2_PM_EVENT_MASK;
   if (fw_pm_event != PCI_CFG_HFS_2_PM_CMOFF_TO_CMX_ERROR &&
       fw_pm_event != PCI_CFG_HFS_2_PM_CM_RESET_ERROR)
    goto end;
  } else {
   dev_err(dev->dev, "failed to read firmware status: %d\n", ret);
  }
 }

 mei_fw_status2str(&dev->saved_fw_status, fw_sts_str, sizeof(fw_sts_str));
 dev_warn(dev->dev, "unexpected reset: fw_pm_event = 0x%x, dev_state = %u fw status = %s\n",
   fw_pm_event, dev->saved_dev_state, fw_sts_str);

end:
 if (dev->gsc_reset_to_pxp == MEI_DEV_RESET_TO_PXP_PERFORMED)
  dev->gsc_reset_to_pxp = MEI_DEV_RESET_TO_PXP_DONE;
 dev->saved_fw_status_flag = false;
}

/**
 * mei_me_hw_start - hw start routine
 *
 * @dev: mei device
 * Return: 0 on success, error otherwise
 */

static int mei_me_hw_start(struct mei_device *dev)
{
 int ret = mei_me_hw_ready_wait(dev);

 if (kind_is_gsc(dev) || kind_is_gscfi(dev))
  mei_me_check_fw_reset(dev);
 if (ret)
  return ret;
 dev_dbg(dev->dev, "hw is ready\n");

 mei_me_host_set_ready(dev);
 return ret;
}


/**
 * mei_hbuf_filled_slots - gets number of device filled buffer slots
 *
 * @dev: the device structure
 *
 * Return: number of filled slots
 */

static unsigned char mei_hbuf_filled_slots(struct mei_device *dev)
{
 u32 hcsr;
 char read_ptr, write_ptr;

 hcsr = mei_hcsr_read(dev);

 read_ptr = (char) ((hcsr & H_CBRP) >> 8);
 write_ptr = (char) ((hcsr & H_CBWP) >> 16);

 return (unsigned char) (write_ptr - read_ptr);
}

/**
 * mei_me_hbuf_is_empty - checks if host buffer is empty.
 *
 * @dev: the device structure
 *
 * Return: true if empty, false - otherwise.
 */

static bool mei_me_hbuf_is_empty(struct mei_device *dev)
{
 return mei_hbuf_filled_slots(dev) == 0;
}

/**
 * mei_me_hbuf_empty_slots - counts write empty slots.
 *
 * @dev: the device structure
 *
 * Return: -EOVERFLOW if overflow, otherwise empty slots count
 */

static int mei_me_hbuf_empty_slots(struct mei_device *dev)
{
 struct mei_me_hw *hw = to_me_hw(dev);
 unsigned char filled_slots, empty_slots;

 filled_slots = mei_hbuf_filled_slots(dev);
 empty_slots = hw->hbuf_depth - filled_slots;

 /* check for overflow */
 if (filled_slots > hw->hbuf_depth)
  return -EOVERFLOW;

 return empty_slots;
}

/**
 * mei_me_hbuf_depth - returns depth of the hw buffer.
 *
 * @dev: the device structure
 *
 * Return: size of hw buffer in slots
 */

static u32 mei_me_hbuf_depth(const struct mei_device *dev)
{
 struct mei_me_hw *hw = to_me_hw(dev);

 return hw->hbuf_depth;
}

/**
 * mei_me_hbuf_write - writes a message to host hw buffer.
 *
 * @dev: the device structure
 * @hdr: header of message
 * @hdr_len: header length in bytes: must be multiplication of a slot (4bytes)
 * @data: payload
 * @data_len: payload length in bytes
 *
 * Return: 0 if success, < 0 - otherwise.
 */

static int mei_me_hbuf_write(struct mei_device *dev,
        const void *hdr, size_t hdr_len,
        const void *data, size_t data_len)
{
 unsigned long rem;
 unsigned long i;
 const u32 *reg_buf;
 u32 dw_cnt;
 int empty_slots;

 if (WARN_ON(!hdr || hdr_len & 0x3))
  return -EINVAL;

 if (!data && data_len) {
  dev_err(dev->dev, "wrong parameters null data with data_len = %zu\n", data_len);
  return -EINVAL;
 }

 dev_dbg(dev->dev, MEI_HDR_FMT, MEI_HDR_PRM((struct mei_msg_hdr *)hdr));

 empty_slots = mei_hbuf_empty_slots(dev);
 dev_dbg(dev->dev, "empty slots = %d.\n", empty_slots);

 if (empty_slots < 0)
  return -EOVERFLOW;

 dw_cnt = mei_data2slots(hdr_len + data_len);
 if (dw_cnt > (u32)empty_slots)
  return -EMSGSIZE;

 reg_buf = hdr;
 for (i = 0; i < hdr_len / MEI_SLOT_SIZE; i++)
  mei_me_hcbww_write(dev, reg_buf[i]);

 reg_buf = data;
 for (i = 0; i < data_len / MEI_SLOT_SIZE; i++)
  mei_me_hcbww_write(dev, reg_buf[i]);

 rem = data_len & 0x3;
 if (rem > 0) {
  u32 reg = 0;

  memcpy(®, (const u8 *)data + data_len - rem, rem);
  mei_me_hcbww_write(dev, reg);
 }

 mei_hcsr_set_hig(dev);
 if (!mei_me_hw_is_ready(dev))
  return -EIO;

 return 0;
}

/**
 * mei_me_count_full_read_slots - counts read full slots.
 *
 * @dev: the device structure
 *
 * Return: -EOVERFLOW if overflow, otherwise filled slots count
 */

static int mei_me_count_full_read_slots(struct mei_device *dev)
{
 u32 me_csr;
 char read_ptr, write_ptr;
 unsigned char buffer_depth, filled_slots;

 me_csr = mei_me_mecsr_read(dev);
 buffer_depth = (unsigned char)((me_csr & ME_CBD_HRA) >> 24);
 read_ptr = (char) ((me_csr & ME_CBRP_HRA) >> 8);
 write_ptr = (char) ((me_csr & ME_CBWP_HRA) >> 16);
 filled_slots = (unsigned char) (write_ptr - read_ptr);

 /* check for overflow */
 if (filled_slots > buffer_depth)
  return -EOVERFLOW;

 dev_dbg(dev->dev, "filled_slots =%08x\n", filled_slots);
 return (int)filled_slots;
}

/**
 * mei_me_read_slots - reads a message from mei device.
 *
 * @dev: the device structure
 * @buffer: message buffer will be written
 * @buffer_length: message size will be read
 *
 * Return: always 0
 */

static int mei_me_read_slots(struct mei_device *dev, unsigned char *buffer,
        unsigned long buffer_length)
{
 u32 *reg_buf = (u32 *)buffer;

 for (; buffer_length >= MEI_SLOT_SIZE; buffer_length -= MEI_SLOT_SIZE)
  *reg_buf++ = mei_me_mecbrw_read(dev);

 if (buffer_length > 0) {
  u32 reg = mei_me_mecbrw_read(dev);

  memcpy(reg_buf, ®, buffer_length);
 }

 mei_hcsr_set_hig(dev);
 return 0;
}

/**
 * mei_me_pg_set - write pg enter register
 *
 * @dev: the device structure
 */

static void mei_me_pg_set(struct mei_device *dev)
{
 struct mei_me_hw *hw = to_me_hw(dev);
 u32 reg;

 reg = mei_me_reg_read(hw, H_HPG_CSR);
 trace_mei_reg_read(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg);

 reg |= H_HPG_CSR_PGI;

 trace_mei_reg_write(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg);
 mei_me_reg_write(hw, H_HPG_CSR, reg);
}

/**
 * mei_me_pg_unset - write pg exit register
 *
 * @dev: the device structure
 */

static void mei_me_pg_unset(struct mei_device *dev)
{
 struct mei_me_hw *hw = to_me_hw(dev);
 u32 reg;

 reg = mei_me_reg_read(hw, H_HPG_CSR);
 trace_mei_reg_read(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg);

 WARN(!(reg & H_HPG_CSR_PGI), "PGI is not set\n");

 reg |= H_HPG_CSR_PGIHEXR;

 trace_mei_reg_write(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg);
 mei_me_reg_write(hw, H_HPG_CSR, reg);
}

/**
 * mei_me_pg_legacy_enter_sync - perform legacy pg entry procedure
 *
 * @dev: the device structure
 *
 * Return: 0 on success an error code otherwise
 */

static int mei_me_pg_legacy_enter_sync(struct mei_device *dev)
{
 struct mei_me_hw *hw = to_me_hw(dev);
 int ret;

 dev->pg_event = MEI_PG_EVENT_WAIT;

 ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_ENTRY_REQ_CMD);
 if (ret)
  return ret;

 mutex_unlock(&dev->device_lock);
 wait_event_timeout(dev->wait_pg,
  dev->pg_event == MEI_PG_EVENT_RECEIVED,
  dev->timeouts.pgi);
 mutex_lock(&dev->device_lock);

 if (dev->pg_event == MEI_PG_EVENT_RECEIVED) {
  mei_me_pg_set(dev);
  ret = 0;
 } else {
  ret = -ETIME;
 }

 dev->pg_event = MEI_PG_EVENT_IDLE;
 hw->pg_state = MEI_PG_ON;

 return ret;
}

/**
 * mei_me_pg_legacy_exit_sync - perform legacy pg exit procedure
 *
 * @dev: the device structure
 *
 * Return: 0 on success an error code otherwise
 */

static int mei_me_pg_legacy_exit_sync(struct mei_device *dev)
{
 struct mei_me_hw *hw = to_me_hw(dev);
 int ret;

 if (dev->pg_event == MEI_PG_EVENT_RECEIVED)
  goto reply;

 dev->pg_event = MEI_PG_EVENT_WAIT;

 mei_me_pg_unset(dev);

 mutex_unlock(&dev->device_lock);
 wait_event_timeout(dev->wait_pg,
  dev->pg_event == MEI_PG_EVENT_RECEIVED,
  dev->timeouts.pgi);
 mutex_lock(&dev->device_lock);

reply:
 if (dev->pg_event != MEI_PG_EVENT_RECEIVED) {
  ret = -ETIME;
  goto out;
 }

 dev->pg_event = MEI_PG_EVENT_INTR_WAIT;
 ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_EXIT_RES_CMD);
 if (ret)
  return ret;

 mutex_unlock(&dev->device_lock);
 wait_event_timeout(dev->wait_pg,
  dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED,
  dev->timeouts.pgi);
 mutex_lock(&dev->device_lock);

 if (dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED)
  ret = 0;
 else
  ret = -ETIME;

out:
 dev->pg_event = MEI_PG_EVENT_IDLE;
 hw->pg_state = MEI_PG_OFF;

 return ret;
}

/**
 * mei_me_pg_in_transition - is device now in pg transition
 *
 * @dev: the device structure
 *
 * Return: true if in pg transition, false otherwise
 */

static bool mei_me_pg_in_transition(struct mei_device *dev)
{
 return dev->pg_event >= MEI_PG_EVENT_WAIT &&
        dev->pg_event <= MEI_PG_EVENT_INTR_WAIT;
}

/**
 * mei_me_pg_is_enabled - detect if PG is supported by HW
 *
 * @dev: the device structure
 *
 * Return: true is pg supported, false otherwise
 */

static bool mei_me_pg_is_enabled(struct mei_device *dev)
{
 struct mei_me_hw *hw = to_me_hw(dev);
 u32 reg = mei_me_mecsr_read(dev);

 if (hw->d0i3_supported)
  return true;

 if ((reg & ME_PGIC_HRA) == 0)
  goto notsupported;

 if (!dev->hbm_f_pg_supported)
  goto notsupported;

 return true;

notsupported:
 dev_dbg(dev->dev, "pg: not supported: d0i3 = %d HGP = %d hbm version %d.%d ?= %d.%d\n",
  hw->d0i3_supported,
  !!(reg & ME_PGIC_HRA),
  dev->version.major_version,
  dev->version.minor_version,
  HBM_MAJOR_VERSION_PGI,
  HBM_MINOR_VERSION_PGI);

 return false;
}

/**
 * mei_me_d0i3_set - write d0i3 register bit on mei device.
 *
 * @dev: the device structure
 * @intr: ask for interrupt
 *
 * Return: D0I3C register value
 */

static u32 mei_me_d0i3_set(struct mei_device *dev, bool intr)
{
 u32 reg = mei_me_d0i3c_read(dev);

 reg |= H_D0I3C_I3;
 if (intr)
  reg |= H_D0I3C_IR;
 else
  reg &= ~H_D0I3C_IR;
 mei_me_d0i3c_write(dev, reg);
 /* read it to ensure HW consistency */
 reg = mei_me_d0i3c_read(dev);
 return reg;
}

/**
 * mei_me_d0i3_unset - clean d0i3 register bit on mei device.
 *
 * @dev: the device structure
 *
 * Return: D0I3C register value
 */

static u32 mei_me_d0i3_unset(struct mei_device *dev)
{
 u32 reg = mei_me_d0i3c_read(dev);

 reg &= ~H_D0I3C_I3;
 reg |= H_D0I3C_IR;
 mei_me_d0i3c_write(dev, reg);
 /* read it to ensure HW consistency */
 reg = mei_me_d0i3c_read(dev);
 return reg;
}

/**
 * mei_me_d0i3_enter_sync - perform d0i3 entry procedure
 *
 * @dev: the device structure
 *
 * Return: 0 on success an error code otherwise
 */

static int mei_me_d0i3_enter_sync(struct mei_device *dev)
{
 struct mei_me_hw *hw = to_me_hw(dev);
 int ret;
 u32 reg;

 reg = mei_me_d0i3c_read(dev);
 if (reg & H_D0I3C_I3) {
  /* we are in d0i3, nothing to do */
  dev_dbg(dev->dev, "d0i3 set not needed\n");
  ret = 0;
  goto on;
 }

 /* PGI entry procedure */
 dev->pg_event = MEI_PG_EVENT_WAIT;

 ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_ENTRY_REQ_CMD);
 if (ret)
  /* FIXME: should we reset here? */
  goto out;

 mutex_unlock(&dev->device_lock);
 wait_event_timeout(dev->wait_pg,
  dev->pg_event == MEI_PG_EVENT_RECEIVED,
  dev->timeouts.pgi);
 mutex_lock(&dev->device_lock);

 if (dev->pg_event != MEI_PG_EVENT_RECEIVED) {
  ret = -ETIME;
  goto out;
 }
 /* end PGI entry procedure */

 dev->pg_event = MEI_PG_EVENT_INTR_WAIT;

 reg = mei_me_d0i3_set(dev, true);
 if (!(reg & H_D0I3C_CIP)) {
  dev_dbg(dev->dev, "d0i3 enter wait not needed\n");
  ret = 0;
  goto on;
 }

 mutex_unlock(&dev->device_lock);
 wait_event_timeout(dev->wait_pg,
  dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED,
  dev->timeouts.d0i3);
 mutex_lock(&dev->device_lock);

 if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) {
  reg = mei_me_d0i3c_read(dev);
  if (!(reg & H_D0I3C_I3)) {
   ret = -ETIME;
   goto out;
  }
 }

 ret = 0;
on:
 hw->pg_state = MEI_PG_ON;
out:
 dev->pg_event = MEI_PG_EVENT_IDLE;
 dev_dbg(dev->dev, "d0i3 enter ret = %d\n", ret);
 return ret;
}

/**
 * mei_me_d0i3_enter - perform d0i3 entry procedure
 *   no hbm PG handshake
 *   no waiting for confirmation; runs with interrupts
 *   disabled
 *
 * @dev: the device structure
 *
 * Return: 0 on success an error code otherwise
 */

static int mei_me_d0i3_enter(struct mei_device *dev)
{
 struct mei_me_hw *hw = to_me_hw(dev);
 u32 reg;

 reg = mei_me_d0i3c_read(dev);
 if (reg & H_D0I3C_I3) {
  /* we are in d0i3, nothing to do */
  dev_dbg(dev->dev, "already d0i3 : set not needed\n");
  goto on;
 }

 mei_me_d0i3_set(dev, false);
on:
 hw->pg_state = MEI_PG_ON;
 dev->pg_event = MEI_PG_EVENT_IDLE;
 dev_dbg(dev->dev, "d0i3 enter\n");
 return 0;
}

/**
 * mei_me_d0i3_exit_sync - perform d0i3 exit procedure
 *
 * @dev: the device structure
 *
 * Return: 0 on success an error code otherwise
 */

static int mei_me_d0i3_exit_sync(struct mei_device *dev)
{
 struct mei_me_hw *hw = to_me_hw(dev);
 int ret;
 u32 reg;

 dev->pg_event = MEI_PG_EVENT_INTR_WAIT;

 reg = mei_me_d0i3c_read(dev);
 if (!(reg & H_D0I3C_I3)) {
  /* we are not in d0i3, nothing to do */
  dev_dbg(dev->dev, "d0i3 exit not needed\n");
  ret = 0;
  goto off;
 }

 reg = mei_me_d0i3_unset(dev);
 if (!(reg & H_D0I3C_CIP)) {
  dev_dbg(dev->dev, "d0i3 exit wait not needed\n");
  ret = 0;
  goto off;
 }

 mutex_unlock(&dev->device_lock);
 wait_event_timeout(dev->wait_pg,
  dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED,
  dev->timeouts.d0i3);
 mutex_lock(&dev->device_lock);

 if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) {
  reg = mei_me_d0i3c_read(dev);
  if (reg & H_D0I3C_I3) {
   ret = -ETIME;
   goto out;
  }
 }

 ret = 0;
off:
 hw->pg_state = MEI_PG_OFF;
out:
 dev->pg_event = MEI_PG_EVENT_IDLE;

 dev_dbg(dev->dev, "d0i3 exit ret = %d\n", ret);
 return ret;
}

/**
 * mei_me_pg_legacy_intr - perform legacy pg processing
 *      in interrupt thread handler
 *
 * @dev: the device structure
 */

static void mei_me_pg_legacy_intr(struct mei_device *dev)
{
 struct mei_me_hw *hw = to_me_hw(dev);

 if (dev->pg_event != MEI_PG_EVENT_INTR_WAIT)
  return;

 dev->pg_event = MEI_PG_EVENT_INTR_RECEIVED;
 hw->pg_state = MEI_PG_OFF;
 if (waitqueue_active(&dev->wait_pg))
  wake_up(&dev->wait_pg);
}

/**
 * mei_me_d0i3_intr - perform d0i3 processing in interrupt thread handler
 *
 * @dev: the device structure
 * @intr_source: interrupt source
 */

static void mei_me_d0i3_intr(struct mei_device *dev, u32 intr_source)
{
 struct mei_me_hw *hw = to_me_hw(dev);

 if (dev->pg_event == MEI_PG_EVENT_INTR_WAIT &&
     (intr_source & H_D0I3C_IS)) {
  dev->pg_event = MEI_PG_EVENT_INTR_RECEIVED;
  if (hw->pg_state == MEI_PG_ON) {
   hw->pg_state = MEI_PG_OFF;
   if (dev->hbm_state != MEI_HBM_IDLE) {
    /*
     * force H_RDY because it could be
     * wiped off during PG
 */

    dev_dbg(dev->dev, "d0i3 set host ready\n");
    mei_me_host_set_ready(dev);
   }
  } else {
   hw->pg_state = MEI_PG_ON;
  }

  wake_up(&dev->wait_pg);
 }

 if (hw->pg_state == MEI_PG_ON && (intr_source & H_IS)) {
  /*
   * HW sent some data and we are in D0i3, so
   * we got here because of HW initiated exit from D0i3.
   * Start runtime pm resume sequence to exit low power state.
 */

  dev_dbg(dev->dev, "d0i3 want resume\n");
  mei_hbm_pg_resume(dev);
 }
}

/**
 * mei_me_pg_intr - perform pg processing in interrupt thread handler
 *
 * @dev: the device structure
 * @intr_source: interrupt source
 */

static void mei_me_pg_intr(struct mei_device *dev, u32 intr_source)
{
 struct mei_me_hw *hw = to_me_hw(dev);

 if (hw->d0i3_supported)
  mei_me_d0i3_intr(dev, intr_source);
 else
  mei_me_pg_legacy_intr(dev);
}

/**
 * mei_me_pg_enter_sync - perform runtime pm entry procedure
 *
 * @dev: the device structure
 *
 * Return: 0 on success an error code otherwise
 */

int mei_me_pg_enter_sync(struct mei_device *dev)
{
 struct mei_me_hw *hw = to_me_hw(dev);

 if (hw->d0i3_supported)
  return mei_me_d0i3_enter_sync(dev);
 else
  return mei_me_pg_legacy_enter_sync(dev);
}

/**
 * mei_me_pg_exit_sync - perform runtime pm exit procedure
 *
 * @dev: the device structure
 *
 * Return: 0 on success an error code otherwise
 */

int mei_me_pg_exit_sync(struct mei_device *dev)
{
 struct mei_me_hw *hw = to_me_hw(dev);

 if (hw->d0i3_supported)
  return mei_me_d0i3_exit_sync(dev);
 else
  return mei_me_pg_legacy_exit_sync(dev);
}

/**
 * mei_me_hw_reset - resets fw via mei csr register.
 *
 * @dev: the device structure
 * @intr_enable: if interrupt should be enabled after reset.
 *
 * Return: 0 on success an error code otherwise
 */

static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable)
{
 struct mei_me_hw *hw = to_me_hw(dev);
 int ret;
 u32 hcsr;

 if (intr_enable) {
  mei_me_intr_enable(dev);
  if (hw->d0i3_supported) {
   ret = mei_me_d0i3_exit_sync(dev);
   if (ret)
    return ret;
  } else {
   hw->pg_state = MEI_PG_OFF;
  }
 }

 pm_runtime_set_active(dev->dev);

 hcsr = mei_hcsr_read(dev);
 /* H_RST may be found lit before reset is started,
  * for example if preceding reset flow hasn't completed.
  * In that case asserting H_RST will be ignored, therefore
  * we need to clean H_RST bit to start a successful reset sequence.
 */

 if ((hcsr & H_RST) == H_RST) {
  dev_warn(dev->dev, "H_RST is set = 0x%08X", hcsr);
  hcsr &= ~H_RST;
  mei_hcsr_set(dev, hcsr);
  hcsr = mei_hcsr_read(dev);
 }

 hcsr |= H_RST | H_IG | H_CSR_IS_MASK;

 if (!intr_enable || mei_me_hw_use_polling(to_me_hw(dev)))
  hcsr &= ~H_CSR_IE_MASK;

 dev->recvd_hw_ready = false;
 mei_hcsr_write(dev, hcsr);

 /*
  * Host reads the H_CSR once to ensure that the
  * posted write to H_CSR completes.
 */

 hcsr = mei_hcsr_read(dev);

 if ((hcsr & H_RST) == 0)
  dev_warn(dev->dev, "H_RST is not set = 0x%08X", hcsr);

 if ((hcsr & H_RDY) == H_RDY)
  dev_warn(dev->dev, "H_RDY is not cleared 0x%08X", hcsr);

 if (!intr_enable) {
  mei_me_hw_reset_release(dev);
  if (hw->d0i3_supported) {
   ret = mei_me_d0i3_enter(dev);
   if (ret)
    return ret;
  }
 }
 return 0;
}

/**
 * mei_me_irq_quick_handler - The ISR of the MEI device
 *
 * @irq: The irq number
 * @dev_id: pointer to the device structure
 *
 * Return: irqreturn_t
 */

irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id)
{
 struct mei_device *dev = (struct mei_device *)dev_id;
 u32 hcsr;

 hcsr = mei_hcsr_read(dev);
 if (!me_intr_src(hcsr))
  return IRQ_NONE;

 dev_dbg(dev->dev, "interrupt source 0x%08X\n", me_intr_src(hcsr));

 /* disable interrupts on device */
 me_intr_disable(dev, hcsr);
 return IRQ_WAKE_THREAD;
}
EXPORT_SYMBOL_GPL(mei_me_irq_quick_handler);

/**
 * mei_me_irq_thread_handler - function called after ISR to handle the interrupt
 * processing.
 *
 * @irq: The irq number
 * @dev_id: pointer to the device structure
 *
 * Return: irqreturn_t
 *
 */

irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
{
 struct mei_device *dev = (struct mei_device *) dev_id;
 struct list_head cmpl_list;
 s32 slots;
 u32 hcsr;
 int rets = 0;

 dev_dbg(dev->dev, "function called after ISR to handle the interrupt processing.\n");
 /* initialize our complete list */
 mutex_lock(&dev->device_lock);

 hcsr = mei_hcsr_read(dev);
 me_intr_clear(dev, hcsr);

 INIT_LIST_HEAD(&cmpl_list);

 /* check if ME wants a reset */
 if (!mei_hw_is_ready(dev) && dev->dev_state != MEI_DEV_RESETTING) {
  if (kind_is_gsc(dev) || kind_is_gscfi(dev)) {
   dev_dbg(dev->dev, "FW not ready: resetting: dev_state = %d\n",
    dev->dev_state);
  } else {
   dev_warn(dev->dev, "FW not ready: resetting: dev_state = %d\n",
     dev->dev_state);
  }
  if (dev->dev_state == MEI_DEV_POWERING_DOWN ||
      dev->dev_state == MEI_DEV_POWER_DOWN)
   mei_cl_all_disconnect(dev);
  else if (dev->dev_state != MEI_DEV_DISABLED)
   schedule_work(&dev->reset_work);
  goto end;
 }

 if (mei_me_hw_is_resetting(dev))
  mei_hcsr_set_hig(dev);

 mei_me_pg_intr(dev, me_intr_src(hcsr));

 /*  check if we need to start the dev */
 if (!mei_host_is_ready(dev)) {
  if (mei_hw_is_ready(dev)) {
   dev_dbg(dev->dev, "we need to start the dev.\n");
   dev->recvd_hw_ready = true;
   wake_up(&dev->wait_hw_ready);
  } else {
   dev_dbg(dev->dev, "Spurious Interrupt\n");
  }
  goto end;
 }
 /* check slots available for reading */
 slots = mei_count_full_read_slots(dev);
 while (slots > 0) {
  dev_dbg(dev->dev, "slots to read = %08x\n", slots);
  rets = mei_irq_read_handler(dev, &cmpl_list, &slots);
  /* There is a race between ME write and interrupt delivery:
   * Not all data is always available immediately after the
   * interrupt, so try to read again on the next interrupt.
 */

  if (rets == -ENODATA)
   break;

  if (rets) {
   dev_err(dev->dev, "mei_irq_read_handler ret = %d, state = %d.\n",
    rets, dev->dev_state);
   if (dev->dev_state != MEI_DEV_RESETTING &&
       dev->dev_state != MEI_DEV_DISABLED &&
       dev->dev_state != MEI_DEV_POWERING_DOWN &&
       dev->dev_state != MEI_DEV_POWER_DOWN)
    schedule_work(&dev->reset_work);
   goto end;
  }
 }

 dev->hbuf_is_ready = mei_hbuf_is_ready(dev);

 /*
  * During PG handshake only allowed write is the replay to the
  * PG exit message, so block calling write function
  * if the pg event is in PG handshake
 */

 if (dev->pg_event != MEI_PG_EVENT_WAIT &&
     dev->pg_event != MEI_PG_EVENT_RECEIVED) {
  rets = mei_irq_write_handler(dev, &cmpl_list);
  dev->hbuf_is_ready = mei_hbuf_is_ready(dev);
 }

 mei_irq_compl_handler(dev, &cmpl_list);

end:
 dev_dbg(dev->dev, "interrupt thread end ret = %d\n", rets);
 mei_me_intr_enable(dev);
 mutex_unlock(&dev->device_lock);
 return IRQ_HANDLED;
}
EXPORT_SYMBOL_GPL(mei_me_irq_thread_handler);

#define MEI_POLLING_TIMEOUT_ACTIVE 100
#define MEI_POLLING_TIMEOUT_IDLE   500

/**
 * mei_me_polling_thread - interrupt register polling thread
 *
 * @_dev: mei device
 *
 * The thread monitors the interrupt source register and calls
 * mei_me_irq_thread_handler() to handle the firmware
 * input.
 *
 * The function polls in MEI_POLLING_TIMEOUT_ACTIVE timeout
 * in case there was an event, in idle case the polling
 * time increases yet again by MEI_POLLING_TIMEOUT_ACTIVE
 * up to MEI_POLLING_TIMEOUT_IDLE.
 *
 * Return: always 0
 */

int mei_me_polling_thread(void *_dev)
{
 struct mei_device *dev = _dev;
 irqreturn_t irq_ret;
 long polling_timeout = MEI_POLLING_TIMEOUT_ACTIVE;

 dev_dbg(dev->dev, "kernel thread is running\n");
 while (!kthread_should_stop()) {
  struct mei_me_hw *hw = to_me_hw(dev);
  u32 hcsr;

  wait_event_timeout(hw->wait_active,
       hw->is_active || kthread_should_stop(),
       msecs_to_jiffies(MEI_POLLING_TIMEOUT_IDLE));

  if (kthread_should_stop())
   break;

  hcsr = mei_hcsr_read(dev);
  if (me_intr_src(hcsr)) {
   polling_timeout = MEI_POLLING_TIMEOUT_ACTIVE;
   irq_ret = mei_me_irq_thread_handler(1, dev);
   if (irq_ret != IRQ_HANDLED)
    dev_err(dev->dev, "irq_ret %d\n", irq_ret);
  } else {
   /*
    * Increase timeout by MEI_POLLING_TIMEOUT_ACTIVE
    * up to MEI_POLLING_TIMEOUT_IDLE
 */

   polling_timeout = clamp_val(polling_timeout + MEI_POLLING_TIMEOUT_ACTIVE,
          MEI_POLLING_TIMEOUT_ACTIVE,
          MEI_POLLING_TIMEOUT_IDLE);
  }

  schedule_timeout_interruptible(msecs_to_jiffies(polling_timeout));
 }

 return 0;
}
EXPORT_SYMBOL_GPL(mei_me_polling_thread);

static const struct mei_hw_ops mei_me_hw_ops = {

 .trc_status = mei_me_trc_status,
 .fw_status = mei_me_fw_status,
 .pg_state  = mei_me_pg_state,

 .host_is_ready = mei_me_host_is_ready,

 .hw_is_ready = mei_me_hw_is_ready,
 .hw_reset = mei_me_hw_reset,
 .hw_config = mei_me_hw_config,
 .hw_start = mei_me_hw_start,

 .pg_in_transition = mei_me_pg_in_transition,
 .pg_is_enabled = mei_me_pg_is_enabled,

 .intr_clear = mei_me_intr_clear,
 .intr_enable = mei_me_intr_enable,
 .intr_disable = mei_me_intr_disable,
 .synchronize_irq = mei_me_synchronize_irq,

 .hbuf_free_slots = mei_me_hbuf_empty_slots,
 .hbuf_is_ready = mei_me_hbuf_is_empty,
 .hbuf_depth = mei_me_hbuf_depth,

 .write = mei_me_hbuf_write,

 .rdbuf_full_slots = mei_me_count_full_read_slots,
 .read_hdr = mei_me_mecbrw_read,
 .read = mei_me_read_slots
};

/**
 * mei_me_fw_type_nm() - check for nm sku
 *
 * @pdev: pci device
 *
 * Read ME FW Status register to check for the Node Manager (NM) Firmware.
 * The NM FW is only signaled in PCI function 0.
 * __Note__: Deprecated by PCH8 and newer.
 *
 * Return: true in case of NM firmware
 */

static bool mei_me_fw_type_nm(const struct pci_dev *pdev)
{
 u32 reg;
 unsigned int devfn;

 devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
 pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_2, ®);
 trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_2", PCI_CFG_HFS_2, reg);
 /* make sure that bit 9 (NM) is up and bit 10 (DM) is down */
 return (reg & 0x600) == 0x200;
}

#define MEI_CFG_FW_NM                           \
 .quirk_probe = mei_me_fw_type_nm

/**
 * mei_me_fw_type_sps_4() - check for sps 4.0 sku
 *
 * @pdev: pci device
 *
 * Read ME FW Status register to check for SPS Firmware.
 * The SPS FW is only signaled in the PCI function 0.
 * __Note__: Deprecated by SPS 5.0 and newer.
 *
 * Return: true in case of SPS firmware
 */

static bool mei_me_fw_type_sps_4(const struct pci_dev *pdev)
{
 u32 reg;
 unsigned int devfn;

 devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
 pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_1, ®);
 trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg);
 return (reg & PCI_CFG_HFS_1_OPMODE_MSK) == PCI_CFG_HFS_1_OPMODE_SPS;
}

#define MEI_CFG_FW_SPS_4                          \
 .quirk_probe = mei_me_fw_type_sps_4

/**
 * mei_me_fw_type_sps_ign() - check for sps or ign sku
 *
 * @pdev: pci device
 *
 * Read ME FW Status register to check for SPS or IGN Firmware.
 * The SPS/IGN FW is only signaled in pci function 0
 *
 * Return: true in case of SPS/IGN firmware
 */

static bool mei_me_fw_type_sps_ign(const struct pci_dev *pdev)
{
 u32 reg;
 u32 fw_type;
 unsigned int devfn;

 devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
 pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_3, ®);
 trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_3", PCI_CFG_HFS_3, reg);
 fw_type = (reg & PCI_CFG_HFS_3_FW_SKU_MSK);

 dev_dbg(&pdev->dev, "fw type is %d\n", fw_type);

 return fw_type == PCI_CFG_HFS_3_FW_SKU_IGN ||
        fw_type == PCI_CFG_HFS_3_FW_SKU_SPS;
}

#define MEI_CFG_KIND_ITOUCH                     \
 .kind = "itouch"

#define MEI_CFG_TYPE_GSC                        \
 .kind = "gsc"

#define MEI_CFG_TYPE_GSCFI                      \
 .kind = "gscfi"

#define MEI_CFG_FW_SPS_IGN                      \
 .quirk_probe = mei_me_fw_type_sps_ign

#define MEI_CFG_FW_VER_SUPP                     \
 .fw_ver_supported = 1

#define MEI_CFG_ICH_HFS                      \
 .fw_status.count = 0

#define MEI_CFG_ICH10_HFS                        \
 .fw_status.count = 1,                   \
 .fw_status.status[0] = PCI_CFG_HFS_1

#define MEI_CFG_PCH_HFS                         \
 .fw_status.count = 2,                   \
 .fw_status.status[0] = PCI_CFG_HFS_1,   \
 .fw_status.status[1] = PCI_CFG_HFS_2

#define MEI_CFG_PCH8_HFS                        \
 .fw_status.count = 6,                   \
 .fw_status.status[0] = PCI_CFG_HFS_1,   \
 .fw_status.status[1] = PCI_CFG_HFS_2,   \
 .fw_status.status[2] = PCI_CFG_HFS_3,   \
 .fw_status.status[3] = PCI_CFG_HFS_4,   \
 .fw_status.status[4] = PCI_CFG_HFS_5,   \
 .fw_status.status[5] = PCI_CFG_HFS_6

#define MEI_CFG_DMA_128 \
 .dma_size[DMA_DSCR_HOST] = SZ_128K, \
 .dma_size[DMA_DSCR_DEVICE] = SZ_128K, \
 .dma_size[DMA_DSCR_CTRL] = PAGE_SIZE

#define MEI_CFG_TRC \
 .hw_trc_supported = 1

/* ICH Legacy devices */
static const struct mei_cfg mei_me_ich_cfg = {
 MEI_CFG_ICH_HFS,
};

/* ICH devices */
static const struct mei_cfg mei_me_ich10_cfg = {
 MEI_CFG_ICH10_HFS,
};

/* PCH6 devices */
static const struct mei_cfg mei_me_pch6_cfg = {
 MEI_CFG_PCH_HFS,
};

/* PCH7 devices */
static const struct mei_cfg mei_me_pch7_cfg = {
 MEI_CFG_PCH_HFS,
 MEI_CFG_FW_VER_SUPP,
};

/* PCH Cougar Point and Patsburg with quirk for Node Manager exclusion */
static const struct mei_cfg mei_me_pch_cpt_pbg_cfg = {
 MEI_CFG_PCH_HFS,
 MEI_CFG_FW_VER_SUPP,
 MEI_CFG_FW_NM,
};

/* PCH8 Lynx Point and newer devices */
static const struct mei_cfg mei_me_pch8_cfg = {
 MEI_CFG_PCH8_HFS,
 MEI_CFG_FW_VER_SUPP,
};

/* PCH8 Lynx Point and newer devices - iTouch */
static const struct mei_cfg mei_me_pch8_itouch_cfg = {
 MEI_CFG_KIND_ITOUCH,
 MEI_CFG_PCH8_HFS,
 MEI_CFG_FW_VER_SUPP,
};

/* PCH8 Lynx Point with quirk for SPS Firmware exclusion */
static const struct mei_cfg mei_me_pch8_sps_4_cfg = {
 MEI_CFG_PCH8_HFS,
 MEI_CFG_FW_VER_SUPP,
 MEI_CFG_FW_SPS_4,
};

/* LBG with quirk for SPS (4.0) Firmware exclusion */
static const struct mei_cfg mei_me_pch12_sps_4_cfg = {
 MEI_CFG_PCH8_HFS,
 MEI_CFG_FW_VER_SUPP,
 MEI_CFG_FW_SPS_4,
};

/* Cannon Lake and newer devices */
static const struct mei_cfg mei_me_pch12_cfg = {
 MEI_CFG_PCH8_HFS,
 MEI_CFG_FW_VER_SUPP,
 MEI_CFG_DMA_128,
};

/* Cannon Lake with quirk for SPS 5.0 and newer Firmware exclusion */
static const struct mei_cfg mei_me_pch12_sps_cfg = {
 MEI_CFG_PCH8_HFS,
 MEI_CFG_FW_VER_SUPP,
 MEI_CFG_DMA_128,
 MEI_CFG_FW_SPS_IGN,
};

/* Cannon Lake itouch with quirk for SPS 5.0 and newer Firmware exclusion
 * w/o DMA support.
 */

static const struct mei_cfg mei_me_pch12_itouch_sps_cfg = {
 MEI_CFG_KIND_ITOUCH,
 MEI_CFG_PCH8_HFS,
 MEI_CFG_FW_VER_SUPP,
 MEI_CFG_FW_SPS_IGN,
};

/* Tiger Lake and newer devices */
static const struct mei_cfg mei_me_pch15_cfg = {
 MEI_CFG_PCH8_HFS,
 MEI_CFG_FW_VER_SUPP,
 MEI_CFG_DMA_128,
 MEI_CFG_TRC,
};

/* Tiger Lake with quirk for SPS 5.0 and newer Firmware exclusion */
static const struct mei_cfg mei_me_pch15_sps_cfg = {
 MEI_CFG_PCH8_HFS,
 MEI_CFG_FW_VER_SUPP,
 MEI_CFG_DMA_128,
 MEI_CFG_TRC,
 MEI_CFG_FW_SPS_IGN,
};

/* Graphics System Controller */
static const struct mei_cfg mei_me_gsc_cfg = {
 MEI_CFG_TYPE_GSC,
 MEI_CFG_PCH8_HFS,
 MEI_CFG_FW_VER_SUPP,
};

/* Graphics System Controller Firmware Interface */
static const struct mei_cfg mei_me_gscfi_cfg = {
 MEI_CFG_TYPE_GSCFI,
 MEI_CFG_PCH8_HFS,
 MEI_CFG_FW_VER_SUPP,
};

/*
 * mei_cfg_list - A list of platform platform specific configurations.
 * Note: has to be synchronized with  enum mei_cfg_idx.
 */

static const struct mei_cfg *const mei_cfg_list[] = {
 [MEI_ME_UNDEF_CFG] = NULL,
 [MEI_ME_ICH_CFG] = &mei_me_ich_cfg,
 [MEI_ME_ICH10_CFG] = &mei_me_ich10_cfg,
 [MEI_ME_PCH6_CFG] = &mei_me_pch6_cfg,
 [MEI_ME_PCH7_CFG] = &mei_me_pch7_cfg,
 [MEI_ME_PCH_CPT_PBG_CFG] = &mei_me_pch_cpt_pbg_cfg,
 [MEI_ME_PCH8_CFG] = &mei_me_pch8_cfg,
 [MEI_ME_PCH8_ITOUCH_CFG] = &mei_me_pch8_itouch_cfg,
 [MEI_ME_PCH8_SPS_4_CFG] = &mei_me_pch8_sps_4_cfg,
 [MEI_ME_PCH12_CFG] = &mei_me_pch12_cfg,
 [MEI_ME_PCH12_SPS_4_CFG] = &mei_me_pch12_sps_4_cfg,
 [MEI_ME_PCH12_SPS_CFG] = &mei_me_pch12_sps_cfg,
 [MEI_ME_PCH12_SPS_ITOUCH_CFG] = &mei_me_pch12_itouch_sps_cfg,
 [MEI_ME_PCH15_CFG] = &mei_me_pch15_cfg,
 [MEI_ME_PCH15_SPS_CFG] = &mei_me_pch15_sps_cfg,
 [MEI_ME_GSC_CFG] = &mei_me_gsc_cfg,
 [MEI_ME_GSCFI_CFG] = &mei_me_gscfi_cfg,
};

const struct mei_cfg *mei_me_get_cfg(kernel_ulong_t idx)
{
 BUILD_BUG_ON(ARRAY_SIZE(mei_cfg_list) != MEI_ME_NUM_CFG);

 if (idx >= MEI_ME_NUM_CFG)
  return NULL;

 return mei_cfg_list[idx];
}
EXPORT_SYMBOL_GPL(mei_me_get_cfg);

/**
 * mei_me_dev_init - allocates and initializes the mei device structure
 *
 * @parent: device associated with physical device (pci/platform)
 * @cfg: per device generation config
 * @slow_fw: configure longer timeouts as FW is slow
 *
 * Return: The mei_device pointer on success, NULL on failure.
 */

struct mei_device *mei_me_dev_init(struct device *parent,
       const struct mei_cfg *cfg, bool slow_fw)
{
 struct mei_device *dev;
 struct mei_me_hw *hw;
 int i;

 dev = devm_kzalloc(parent, sizeof(*dev) + sizeof(*hw), GFP_KERNEL);
 if (!dev)
  return NULL;

 hw = to_me_hw(dev);

 for (i = 0; i < DMA_DSCR_NUM; i++)
  dev->dr_dscr[i].size = cfg->dma_size[i];

 mei_device_init(dev, parent, slow_fw, &mei_me_hw_ops);
 hw->cfg = cfg;

 dev->fw_f_fw_ver_supported = cfg->fw_ver_supported;

 dev->kind = cfg->kind;

 return dev;
}
EXPORT_SYMBOL_GPL(mei_me_dev_init);

Messung V0.5 in Prozent
C=95 H=92 G=93

¤ Dauer der Verarbeitung: 0.48 Sekunden  (vorverarbeitet am  2026-09-30) ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

PVS Prover

Isabelle Prover

NIST Cobol Testsuite

Cephes Mathematical Library

Vienna Development Method

Haftungshinweis

Diese beiden folgenden Angebotsgruppen bietet das Unternehmen

Bemerkung:

sprechenden Kalenders






                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Open Source Software

     Quellcodebibliothek
     Eigene Quellcodes
     Fremde Quellcodes
     Suchen

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Statistik
#Sources=1126864
#Domains=1897691