// SPDX-License-Identifier: MIT
/*
* Copyright © 2022 Intel Corporation
*/
#include <linux/math64.h>
#include "xe_gt_clock.h"
#include "regs/xe_gt_regs.h"
#include "regs/xe_regs.h"
#include "xe_assert.h"
#include "xe_device.h"
#include "xe_gt.h"
#include "xe_gt_printk.h"
#include "xe_macros.h"
#include "xe_mmio.h"
#define f19_2_mhz 19200000
#define f24_mhz 24000000
#define f25_mhz 25000000
#define f38_4_mhz 38400000
#define ts_base_83 83333
#define ts_base_52 52083
#define ts_base_80 80000
static void read_crystal_clock(struct xe_gt *gt, u32 rpm_config_reg, u32 *freq,
u32 *timestamp_base)
{
u32 crystal_clock = REG_FIELD_GET(RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_MASK,
rpm_config_reg);
switch (crystal_clock) {
case RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_24_MHZ:
*freq = f24_mhz;
*timestamp_base = ts_base_83;
return ;
case RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_19_2_MHZ:
*freq = f19_2_mhz;
*timestamp_base = ts_base_52;
return ;
case RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_38_4_MHZ:
*freq = f38_4_mhz;
*timestamp_base = ts_base_52;
return ;
case RPM_CONFIG0_CRYSTAL_CLOCK_FREQ_25_MHZ:
*freq = f25_mhz;
*timestamp_base = ts_base_80;
return ;
default :
xe_gt_warn(gt, "Invalid crystal clock frequency: %u" , crystal_clock);
*freq = 0 ;
*timestamp_base = 0 ;
return ;
}
}
static void check_ctc_mode(struct xe_gt *gt)
{
/*
* CTC_MODE [ 0 ] = 1 is definitely not supported for Xe2 and later
* platforms . In theory it could be a valid setting for pre - Xe2
* platforms , but there ' s no documentation on how to properly handle
* this case . Reading TIMESTAMP_OVERRIDE , as the driver attempted in
* the past has been confirmed as incorrect by the hardware architects .
*
* For now just warn if we ever encounter hardware in the wild that
* has this setting and move on as if it hadn ' t been set .
*/
if (xe_mmio_read32(>->mmio, CTC_MODE) & CTC_SOURCE_DIVIDE_LOGIC)
xe_gt_warn(gt, "CTC_MODE[0] is set; this is unexpected and undocumented\n" );
}
int xe_gt_clock_init(struct xe_gt *gt)
{
u32 freq;
u32 c0;
if (!IS_SRIOV_VF(gt_to_xe(gt)))
check_ctc_mode(gt);
c0 = xe_mmio_read32(>->mmio, RPM_CONFIG0);
read_crystal_clock(gt, c0, &freq, >->info.timestamp_base);
/*
* Now figure out how the command stream ' s timestamp
* register increments from this frequency ( it might
* increment only every few clock cycle ) .
*/
freq >>= 3 - REG_FIELD_GET(RPM_CONFIG0_CTC_SHIFT_PARAMETER_MASK, c0);
gt->info.reference_clock = freq;
return 0 ;
}
static u64 div_u64_roundup(u64 n, u32 d)
{
return div_u64(n + d - 1 , d);
}
/**
* xe_gt_clock_interval_to_ms - Convert sampled GT clock ticks to msec
*
* @ gt : the & xe_gt
* @ count : count of GT clock ticks
*
* Returns : time in msec
*/
u64 xe_gt_clock_interval_to_ms(struct xe_gt *gt, u64 count)
{
return div_u64_roundup(count * MSEC_PER_SEC, gt->info.reference_clock);
}
Messung V0.5 in Prozent C=98 H=96 G=96
¤ Dauer der Verarbeitung: 0.9 Sekunden
(vorverarbeitet am 2026-09-28)
¤
*© Formatika GbR, Deutschland