// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
* Copyright 2025 Toradex
*
* Common dtsi for Verdin AM62P SoM on Mallow carrier board
*
*
https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
*
https://www.toradex.com/products/carrier-board/mallow-carrier-board
*/
#include <dt-bindings/leds/common.h>
/ {
aliases {
eeprom1 = &carrier_eeprom;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi1_clk_gpio>,
<&pinctrl_qspi1_cs_gpio>,
<&pinctrl_qspi1_io0_gpio>,
<&pinctrl_qspi1_io1_gpio>;
/* SODIMM 52 - USER_LED_1_RED */
led-0 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_DEBUG;
function-enumerator = <1>;
gpios = <&main_gpio0 0 GPIO_ACTIVE_HIGH>;
};
/* SODIMM 54 - USER_LED_1_GREEN */
led-1 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_DEBUG;
function-enumerator = <1>;
gpios = <&main_gpio0 11 GPIO_ACTIVE_HIGH>;
};
/* SODIMM 56 - USER_LED_2_RED */
led-2 {
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_DEBUG;
function-enumerator = <2>;
gpios = <&main_gpio0 3 GPIO_ACTIVE_HIGH>;
};
/* SODIMM 58 - USER_LED_2_GREEN */
led-3 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_DEBUG;
function-enumerator = <2>;
gpios = <&main_gpio0 4 GPIO_ACTIVE_HIGH>;
};
};
};
/* Verdin ETHs */
&cpsw3g {
status = "okay";
};
/* MDIO, shared by Verdin ETH_1 (On-module PHY) and Verdin ETH_2_RGMII */
&cpsw3g_mdio {
status = "okay";
};
/* Verdin ETH_1 (On-module PHY) */
&cpsw_port1 {
status = "okay";
};
/* Verdin PWM_3_DSI */
&epwm0 {
status = "okay";
};
/* Verdin PWM_1, PWM_2 */
&epwm2 {
status = "okay";
};
&main_gpio0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie_1_reset>,
<&pinctrl_gpio_5>,
<&pinctrl_gpio_6>,
<&pinctrl_gpio_7>,
<&pinctrl_gpio_8>;
};
/* Verdin I2C_1 */
&main_i2c0 {
status = "okay";
temperature-sensor@4f {
compatible = "ti,tmp1075";
reg = <0x4f>;
};
carrier_eeprom: eeprom@57 {
compatible = "st,24c02", "atmel,24c02";
reg = <0x57>;
pagesize = <16>;
};
};
/* Verdin I2C_2_DSI */
&main_i2c1 {
status = "okay";
};
/* Verdin I2C_4_CSI */
&main_i2c3 {
status = "okay";
};
/* Verdin CAN_1 */
&main_mcan0 {
status = "okay";
};
/* Verdin SPI_1 */
&main_spi1 {
pinctrl-0 = <&pinctrl_main_spi1>,
<&pinctrl_main_spi1_cs0>,
<&pinctrl_qspi1_cs2_gpio>;
cs-gpios = <0>, <&main_gpio0 12 GPIO_ACTIVE_LOW>;
status = "okay";
tpm@1 {
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
reg = <1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi1_dqs_gpio>;
interrupt-parent = <&main_gpio0>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
spi-max-frequency = <18500000>;
};
};
/* Verdin UART_3, used as the Linux console */
&main_uart0 {
status = "okay";
};
/* Verdin UART_1 */
&main_uart1 {
status = "okay";
};
&mcu_gpio0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_1>,
<&pinctrl_gpio_2>,
<&pinctrl_gpio_3>,
<&pinctrl_gpio_4>;
};
/* Verdin I2C_3_HDMI */
&mcu_i2c0 {
status = "okay";
};
/* Verdin CAN_2 */
&mcu_mcan0 {
status = "okay";
};
/* Verdin UART_4 */
&mcu_uart0 {
status = "okay";
};
/* Verdin SD_1 */
&sdhci1 {
status = "okay";
};
/* Verdin USB_1 */
&usbss0 {
status = "okay";
};
&usb0 {
status = "okay";
};
/* Verdin USB_2 */
&usbss1 {
status = "okay";
};
&usb1 {
status = "okay";
};
/* Verdin CTRL_WAKE1_MICO# */
&verdin_gpio_keys {
status = "okay";
};
/* Verdin PCIE_1_RESET# */
&verdin_pcie_1_reset_hog {
status = "okay";
};
/* Verdin UART_2 */
&wkup_uart0 {
status = "okay";
};
