Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  rk3588s-odroid-m2.dts   Sprache: unbekannt

 
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/soc/rockchip,vop2.h>
#include <dt-bindings/usb/pd.h>
#include "rk3588s.dtsi"

/ {
 model = "Hardkernel ODROID-M2";
 compatible = "hardkernel,odroid-m2", "rockchip,rk3588s";

 aliases {
  ethernet0 = &gmac1;
  mmc0 = &sdhci;
  mmc1 = &sdmmc;
 };

 chosen {
  stdout-path = "serial2:1500000n8";
 };

 hdmi-con {
  compatible = "hdmi-connector";
  type = "a";

  port {
   hdmi_con_in: endpoint {
    remote-endpoint = <&hdmi0_out_con>;
   };
  };
 };

 leds {
  compatible = "gpio-leds";
  pinctrl-names = "default";
  pinctrl-0 = <&pwr_led>, <&sys_led>;

  led_pwr: led-0 {
   color = <LED_COLOR_ID_RED>;
   default-state = "on";
   function = LED_FUNCTION_POWER;
   gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "default-on";
  };

  led_sys: led-1 {
   color = <LED_COLOR_ID_BLUE>;
   default-state = "on";
   function = LED_FUNCTION_HEARTBEAT;
   gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "heartbeat";
  };
 };

 fan: pwm-fan {
  compatible = "pwm-fan";
  #cooling-cells = <2>;
  cooling-levels = <0 192 224 255>;
  fan-supply = <&vcc5v0_sys>;
  pwms = <&pwm0 0 22222 0>;
 };

 vcc_1v1_nldo_s3: regulator-1v1-vcc-nldo-s3 {
  compatible = "regulator-fixed";
  regulator-name = "vcc_1v1_nldo_s3";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <1100000>;
  regulator-max-microvolt = <1100000>;
  vin-supply = <&vcc4v0_sys>;
 };

 vcc3v3_lcd: regulator-3v3-vcc-lcd {
  compatible = "regulator-fixed";
  enable-active-high;
  gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
  pinctrl-names = "default";
  pinctrl-0 = <&lcd_pwren>;
  regulator-name = "vcc3v3_lcd";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  vin-supply = <&vcc_3v3_s3>;
 };

 vcc3v3_pcie: regulator-3v3-vcc-pcie {
  compatible = "regulator-fixed";
  enable-active-high;
  gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
  pinctrl-names = "default";
  pinctrl-0 = <&pcie_pwren>;
  regulator-name = "vcc3v3_pcie";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  vin-supply = <&vcc_3v3_s3>;
 };

 vcc_3v3_s0: regulator-3v3-vcc-s0 {
  compatible = "regulator-fixed";
  regulator-name = "vcc_3v3_s0";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  vin-supply = <&vcc_3v3_s3>;
 };

 vcc4v0_sys: regulator-4v0-vcc-sys {
  compatible = "regulator-fixed";
  regulator-name = "vcc4v0_sys";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <4800000>;
  regulator-max-microvolt = <4800000>;
  vin-supply = <&vcc12v_dcin>;
 };

 vcc5v0_sys: regulator-5v0-vcc-sys {
  compatible = "regulator-fixed";
  enable-active-high;
  gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
  pinctrl-names = "default";
  pinctrl-0 = <&vcc5v0_pwren>;
  regulator-name = "vcc5v0_sys";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  vin-supply = <&vcc12v_dcin>;
 };

 vcc5v0_usb2_host: regulator-5v0-vcc-usb2-host {
  compatible = "regulator-fixed";
  enable-active-high;
  gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
  pinctrl-names = "default";
  pinctrl-0 = <&usb2_host_pwren>;
  regulator-name = "vcc5v0_usb2_host";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  vin-supply = <&vcc5v0_sys>;
 };

 vcc5v0_usb3_host: regulator-5v0-vcc-usb3-host {
  compatible = "regulator-fixed";
  enable-active-high;
  gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
  pinctrl-names = "default";
  pinctrl-0 = <&usb3_host_pwren>;
  regulator-name = "vcc5v0_usb3_host";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  vin-supply = <&vcc5v0_sys>;
 };

 vcc5v0_usb3_typec: regulator-5v0-vcc-usb3-typec {
  compatible = "regulator-fixed";
  enable-active-high;
  gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
  pinctrl-names = "default";
  pinctrl-0 = <&usb3_typec_pwren>;
  regulator-name = "vcc5v0_usb3_typec";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  vin-supply = <&vcc5v0_sys>;
 };

 vcca: regulator-5v0-vcca {
  compatible = "regulator-fixed";
  regulator-name = "vcca";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  vin-supply = <&vcc12v_dcin>;
 };

 vcc12v_dcin: regulator-12v0-vcc-dcin {
  compatible = "regulator-fixed";
  regulator-name = "vcc12v_dcin";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <12000000>;
  regulator-max-microvolt = <12000000>;
 };
};

&combphy0_ps {
 status = "okay";
};

&combphy2_psu {
 status = "okay";
};

&cpu_b0 {
 cpu-supply = <&vdd_cpu_big0_s0>;
};

&cpu_b1 {
 cpu-supply = <&vdd_cpu_big0_s0>;
};

&cpu_b2 {
 cpu-supply = <&vdd_cpu_big1_s0>;
};

&cpu_b3 {
 cpu-supply = <&vdd_cpu_big1_s0>;
};

&cpu_l0 {
 cpu-supply = <&vdd_cpu_lit_s0>;
};

&cpu_l1 {
 cpu-supply = <&vdd_cpu_lit_s0>;
};

&cpu_l2 {
 cpu-supply = <&vdd_cpu_lit_s0>;
};

&cpu_l3 {
 cpu-supply = <&vdd_cpu_lit_s0>;
};

&gmac1 {
 clock_in_out = "output";
 phy-handle = <&rgmii_phy1>;
 phy-mode = "rgmii-id";
 phy-supply = <&vcc_3v3_s0>;
 pinctrl-names = "default";
 pinctrl-0 = <&gmac1_miim
       &gmac1_tx_bus2
       &gmac1_rx_bus2
       &gmac1_rgmii_clk
       &gmac1_rgmii_bus
       &gmac1_clkinout>;
 status = "okay";
};

&gpu {
 mali-supply = <&vdd_gpu_s0>;
 status = "okay";
};

&hdmi0 {
 status = "okay";
};

&hdmi0_in {
 hdmi0_in_vp0: endpoint {
  remote-endpoint = <&vp0_out_hdmi0>;
 };
};

&hdmi0_out {
 hdmi0_out_con: endpoint {
  remote-endpoint = <&hdmi_con_in>;
 };
};

&hdptxphy0 {
 status = "okay";
};

&i2c0 {
 pinctrl-names = "default";
 pinctrl-0 = <&i2c0m2_xfer>;
 status = "okay";

 vdd_cpu_big0_s0: regulator@42 {
  compatible = "rockchip,rk8602";
  reg = <0x42>;
  fcs,suspend-voltage-selector = <1>;
  regulator-name = "vdd_cpu_big0_s0";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <550000>;
  regulator-max-microvolt = <1050000>;
  regulator-ramp-delay = <2300>;
  vin-supply = <&vcc4v0_sys>;

  regulator-state-mem {
   regulator-off-in-suspend;
  };
 };

 vdd_cpu_big1_s0: regulator@43 {
  compatible = "rockchip,rk8603", "rockchip,rk8602";
  reg = <0x43>;
  fcs,suspend-voltage-selector = <1>;
  regulator-name = "vdd_cpu_big1_s0";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <550000>;
  regulator-max-microvolt = <1050000>;
  regulator-ramp-delay = <2300>;
  vin-supply = <&vcc4v0_sys>;

  regulator-state-mem {
   regulator-off-in-suspend;
  };
 };
};

&i2c2 {
 status = "okay";

 vdd_npu_s0: regulator@42 {
  compatible = "rockchip,rk8602";
  reg = <0x42>;
  fcs,suspend-voltage-selector = <1>;
  regulator-name = "vdd_npu_s0";
  regulator-always-on;
  regulator-boot-on;
  regulator-min-microvolt = <550000>;
  regulator-max-microvolt = <950000>;
  regulator-ramp-delay = <2300>;
  vin-supply = <&vcc4v0_sys>;

  regulator-state-mem {
   regulator-off-in-suspend;
  };
 };
};

&i2c8 {
 clock-frequency = <400000>;
 pinctrl-names = "default";
 pinctrl-0 = <&i2c8m2_xfer>;
 status = "okay";

 usbc0: usb-typec@22 {
  compatible = "fcs,fusb302";
  reg = <0x22>;
  interrupt-parent = <&gpio4>;
  interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
  pinctrl-names = "default";
  pinctrl-0 = <&usbc0_int>;
  vbus-supply = <&vcc5v0_usb3_typec>;

  connector {
   compatible = "usb-c-connector";
   data-role = "dual";
   label = "USB-C";
   op-sink-microwatt = <1000000>;
   power-role = "dual";
   sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
   source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
   try-power-role = "source";

   ports {
    #address-cells = <1>;
    #size-cells = <0>;

    port@0 {
     reg = <0>;

     usbc0_role_switch: endpoint {
      remote-endpoint = <&usb_host0_xhci_role_switch>;
     };
    };

    port@1 {
     reg = <1>;

     usbc0_orientation_switch: endpoint {
      remote-endpoint = <&usbdp_phy0_orientation_switch>;
     };
    };

    port@2 {
     reg = <2>;

     usbc0_dp_altmode_mux: endpoint {
      remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
     };
    };
   };
  };
 };

 pcf8563: rtc@51 {
  compatible = "nxp,pcf8563";
  reg = <0x51>;
  interrupt-parent = <&gpio0>;
  interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
  pinctrl-names = "default";
  pinctrl-0 = <&pcf8563_int>;
  wakeup-source;
 };
};

&mdio1 {
 rgmii_phy1: ethernet-phy@1 {
  compatible = "ethernet-phy-id001c.c916";
  reg = <1>;
  reset-assert-us = <20000>;
  reset-deassert-us = <100000>;
  reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
 };
};

&package_thermal {
 polling-delay = <1000>;

 trips {
  package_fan0: package-fan0 {
   hysteresis = <2000>;
   temperature = <60000>;
   type = "active";
  };
 };

 cooling-maps {
  map0 {
   cooling-device = <&fan 1 THERMAL_NO_LIMIT>;
   trip = <&package_fan0>;
  };
 };
};

&pcie2x1l2 {
 pinctrl-names = "default";
 pinctrl-0 = <&pcie20x1_pins>;
 reset-gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_HIGH>;
 vpcie3v3-supply = <&vcc3v3_pcie>;
 status = "okay";
};

&pd_gpu {
 domain-supply = <&vdd_gpu_s0>;
};

&pinctrl {
 lcd {
  lcd_pwren: lcd-pwren {
   rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 leds {
  pwr_led: pwr-led {
   rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  sys_led: sys-led {
   rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 pcie {
  pcie20x1_pins: pcie20x1-pins {
   rockchip,pins =
    <1 RK_PA0 4 &pcfg_pull_none>,
    <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>,
    <1 RK_PA1 4 &pcfg_pull_none>;
  };

  pcie_pwren: pcie-pwren {
   rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 regulator {
  vcc5v0_pwren: vcc5v0-pwren {
   rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 rtc {
  pcf8563_int: pcf8563-int {
   rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 usb {
  usb2_host_pwren: usb2-host-pwren {
   rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  usb3_host_pwren: usb3-host-pwren {
   rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  usb3_typec_pwren: usb3-typec-pwren {
   rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  usbc0_int: usbc0-int {
   rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };
};

&pwm0 {
 pinctrl-names = "default";
 pinctrl-0 = <&pwm0m2_pins>;
 status = "okay";
};

&saradc {
 vref-supply = <&vcca_1v8_s0>;
 status = "okay";
};

&sdhci {
 bus-width = <8>;
 mmc-hs400-1_8v;
 mmc-hs400-enhanced-strobe;
 no-sd;
 no-sdio;
 non-removable;
 vmmc-supply = <&vcc_3v3_s0>;
 vqmmc-supply = <&vcc_1v8_s0>;
 status = "okay";
};

&sdmmc {
 bus-width = <4>;
 cap-sd-highspeed;
 cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 disable-wp;
 max-frequency = <150000000>;
 no-mmc;
 no-sdio;
 sd-uhs-sdr104;
 vmmc-supply = <&vcc_3v3_s3>;
 vqmmc-supply = <&vccio_sd_s0>;
 status = "okay";
};

&spi2 {
 assigned-clocks = <&cru CLK_SPI2>;
 assigned-clock-rates = <200000000>;
 num-cs = <1>;
 pinctrl-names = "default";
 pinctrl-0 = <&spi2m2_cs0>, <&spi2m2_pins>;
 status = "okay";

 pmic@0 {
  compatible = "rockchip,rk806";
  reg = <0x0>;
  #gpio-cells = <2>;
  gpio-controller;
  interrupt-parent = <&gpio0>;
  interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
  pinctrl-names = "default";
  pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
       <&rk806_dvs2_null>, <&rk806_dvs3_null>;
  spi-max-frequency = <1000000>;
  system-power-controller;

  vcc1-supply = <&vcc4v0_sys>;
  vcc2-supply = <&vcc4v0_sys>;
  vcc3-supply = <&vcc4v0_sys>;
  vcc4-supply = <&vcc4v0_sys>;
  vcc5-supply = <&vcc4v0_sys>;
  vcc6-supply = <&vcc4v0_sys>;
  vcc7-supply = <&vcc4v0_sys>;
  vcc8-supply = <&vcc4v0_sys>;
  vcc9-supply = <&vcc4v0_sys>;
  vcc10-supply = <&vcc4v0_sys>;
  vcc11-supply = <&vcc_2v0_pldo_s3>;
  vcc12-supply = <&vcc4v0_sys>;
  vcc13-supply = <&vcc_1v1_nldo_s3>;
  vcc14-supply = <&vcc_1v1_nldo_s3>;
  vcca-supply = <&vcca>;

  rk806_dvs1_null: dvs1-null-pins {
   pins = "gpio_pwrctrl1";
   function = "pin_fun0";
  };

  rk806_dvs2_null: dvs2-null-pins {
   pins = "gpio_pwrctrl2";
   function = "pin_fun0";
  };

  rk806_dvs3_null: dvs3-null-pins {
   pins = "gpio_pwrctrl3";
   function = "pin_fun0";
  };

  regulators {
   vdd_gpu_s0: dcdc-reg1 {
    regulator-name = "vdd_gpu_s0";
    regulator-boot-on;
    regulator-min-microvolt = <550000>;
    regulator-max-microvolt = <950000>;
    regulator-ramp-delay = <12500>;
    regulator-enable-ramp-delay = <400>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdd_cpu_lit_s0: dcdc-reg2 {
    regulator-name = "vdd_cpu_lit_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <550000>;
    regulator-max-microvolt = <950000>;
    regulator-ramp-delay = <12500>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdd_logic_s0: dcdc-reg3 {
    regulator-name = "vdd_logic_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <675000>;
    regulator-max-microvolt = <750000>;
    regulator-ramp-delay = <12500>;

    regulator-state-mem {
     regulator-off-in-suspend;
     regulator-suspend-microvolt = <750000>;
    };
   };

   vdd_vdenc_s0: dcdc-reg4 {
    regulator-name = "vdd_vdenc_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <550000>;
    regulator-max-microvolt = <950000>;
    regulator-ramp-delay = <12500>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdd_ddr_s0: dcdc-reg5 {
    regulator-name = "vdd_ddr_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <675000>;
    regulator-max-microvolt = <900000>;
    regulator-ramp-delay = <12500>;

    regulator-state-mem {
     regulator-off-in-suspend;
     regulator-suspend-microvolt = <850000>;
    };
   };

   vdd2_ddr_s3: dcdc-reg6 {
    regulator-name = "vdd2_ddr_s3";
    regulator-always-on;
    regulator-boot-on;

    regulator-state-mem {
     regulator-on-in-suspend;
    };
   };

   vcc_2v0_pldo_s3: dcdc-reg7 {
    regulator-name = "vdd_2v0_pldo_s3";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <2000000>;
    regulator-max-microvolt = <2000000>;
    regulator-ramp-delay = <12500>;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <2000000>;
    };
   };

   vcc_3v3_s3: dcdc-reg8 {
    regulator-name = "vcc_3v3_s3";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <3300000>;
    };
   };

   vddq_ddr_s0: dcdc-reg9 {
    regulator-name = "vddq_ddr_s0";
    regulator-always-on;
    regulator-boot-on;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc_1v8_s3: dcdc-reg10 {
    regulator-name = "vcc_1v8_s3";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <1800000>;
    };
   };

   vcc_1v8_s0: pldo-reg1 {
    regulator-name = "vcc_1v8_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcca_1v8_s0: pldo-reg2 {
    regulator-name = "vcca_1v8_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-off-in-suspend;
     regulator-suspend-microvolt = <1800000>;
    };
   };

   vdda_1v2_s0: pldo-reg3 {
    regulator-name = "vdda_1v2_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1200000>;
    regulator-max-microvolt = <1200000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcca_3v3_s0: pldo-reg4 {
    regulator-name = "vcca_3v3_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;
    regulator-ramp-delay = <12500>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vccio_sd_s0: pldo-reg5 {
    regulator-name = "vccio_sd_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <3300000>;
    regulator-ramp-delay = <12500>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc_1v8_s3_pldo6: pldo-reg6 {
    regulator-name = "vcc_1v8_s3_pldo6";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <1800000>;
    };
   };

   vdd_0v75_s3: nldo-reg1 {
    regulator-name = "vdd_0v75_s3";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <750000>;
    regulator-max-microvolt = <750000>;

    regulator-state-mem {
     regulator-on-in-suspend;
     regulator-suspend-microvolt = <750000>;
    };
   };

   vdda_ddr_pll_s0: nldo-reg2 {
    regulator-name = "vdda_ddr_pll_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <900000>;
    regulator-max-microvolt = <900000>;

    regulator-state-mem {
     regulator-off-in-suspend;
     regulator-suspend-microvolt = <850000>;
    };
   };

   vdda_0v75_s0: nldo-reg3 {
    regulator-name = "vdda_0v75_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <837500>;
    regulator-max-microvolt = <837500>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdda_0v85_s0: nldo-reg4 {
    regulator-name = "vdda_0v85_s0";
    regulator-always-on;
    regulator-boot-on;
    regulator-min-microvolt = <850000>;
    regulator-max-microvolt = <850000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   /* Schematics show not in use */
   nldo-reg5 {
   };
  };
 };
};

&tsadc {
 status = "okay";
};

&u2phy0 {
 status = "okay";
};

&u2phy0_otg {
 status = "okay";
};

&u2phy2 {
 status = "okay";
};

&u2phy2_host {
 phy-supply = <&vcc5v0_usb2_host>;
 status = "okay";
};

&u2phy3 {
 status = "okay";
};

&u2phy3_host {
 phy-supply = <&vcc5v0_usb3_host>;
 status = "okay";
};

&uart2 {
 pinctrl-names = "default";
 pinctrl-0 = <&uart2m0_xfer>;
 status = "okay";
};

&usb_host0_ehci {
 status = "okay";
};

&usb_host0_ohci {
 status = "okay";
};

&usb_host0_xhci {
 usb-role-switch;
 status = "okay";

 port {
  usb_host0_xhci_role_switch: endpoint {
   remote-endpoint = <&usbc0_role_switch>;
  };
 };
};

&usb_host1_ehci {
 status = "okay";
};

&usb_host1_ohci {
 status = "okay";
};

&usb_host2_xhci {
 status = "okay";
};

&usbdp_phy0 {
 mode-switch;
 orientation-switch;
 sbu1-dc-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
 sbu2-dc-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
 status = "okay";

 port {
  #address-cells = <1>;
  #size-cells = <0>;

  usbdp_phy0_orientation_switch: endpoint@0 {
   reg = <0>;
   remote-endpoint = <&usbc0_orientation_switch>;
  };

  usbdp_phy0_dp_altmode_mux: endpoint@1 {
   reg = <1>;
   remote-endpoint = <&usbc0_dp_altmode_mux>;
  };
 };
};

&vop {
 status = "okay";
};

&vop_mmu {
 status = "okay";
};

&vp0 {
 vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
  reg = <ROCKCHIP_VOP2_EP_HDMI0>;
  remote-endpoint = <&hdmi0_in_vp0>;
 };
};

[ Dauer der Verarbeitung: 0.17 Sekunden  (vorverarbeitet)  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge