Eine aufbereitete Darstellung der Quelle

 
     
 
 
Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 

Benutzer

Quelle  rk3566-pinenote.dtsi   Sprache: unbekannt

 
Spracherkennung für: .dtsi vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/rockchip.h>

#include "rk3566.dtsi"

/ {
 chassis-type = "tablet";

 aliases {
  mmc0 = &sdhci;
 };

 chosen {
  stdout-path = "serial2:1500000n8";
 };

 adc-keys {
  compatible = "adc-keys";
  io-channels = <&saradc 0>;
  io-channel-names = "buttons";
  keyup-threshold-microvolt = <1750000>;

  button-recovery {
   label = "recovery";
   linux,code = <KEY_VENDOR>;
   press-threshold-microvolt = <0>;
  };
 };

 spk_amp: audio-amplifier {
  compatible = "simple-audio-amplifier";
  enable-gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
  pinctrl-0 = <&spk_amp_enable_h>;
  pinctrl-names = "default";
  sound-name-prefix = "Speaker Amp";
 };

 dmic_codec: dmic-codec {
  compatible = "dmic-codec";
  num-channels = <6>;
  #sound-dai-cells = <0>;
 };

 gpio-keys {
  compatible = "gpio-keys";
  pinctrl-0 = <&hall_int_l>;
  pinctrl-names = "default";

  switch-cover {
   label = "cover";
   gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
   linux,input-type = <EV_SW>;
   linux,code = <SW_LID>;
   linux,can-disable;
   wakeup-event-action = <EV_ACT_DEASSERTED>;
   wakeup-source;
  };
 };

 gpio-leds {
  compatible = "gpio-leds";
  pinctrl-0 = <&led_pin>;
  pinctrl-names = "default";

  led-0 {
   color = <LED_COLOR_ID_WHITE>;
   function = LED_FUNCTION_CHARGING;
   gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
  };
 };

 sdio_pwrseq: sdio-pwrseq {
  compatible = "mmc-pwrseq-simple";
  clocks = <&rk817 1>;
  clock-names = "ext_clock";
  pinctrl-0 = <&wifi_enable_h>;
  pinctrl-names = "default";
  reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
 };

 sound {
  compatible = "simple-audio-card";
  simple-audio-card,name = "PineNote";
  simple-audio-card,aux-devs = <&spk_amp>;
  simple-audio-card,widgets = "Headphone", "Headphones",
         "Speaker", "Internal Speakers";
  simple-audio-card,routing = "Headphones", "HPOL",
         "Headphones", "HPOR",
         "Internal Speakers", "Speaker Amp OUTL",
         "Internal Speakers", "Speaker Amp OUTR",
         "Speaker Amp INL", "HPOL",
         "Speaker Amp INR", "HPOR";
  simple-audio-card,pin-switches = "Internal Speakers";
  #address-cells = <1>;
  #size-cells = <0>;

  simple-audio-card,dai-link@0 {
   reg = <0>;
   bitclock-master = <&link0_cpu>;
   format = "i2s";
   frame-master = <&link0_cpu>;
   mclk-fs = <256>;

   link0_cpu: cpu {
    sound-dai = <&i2s1_8ch>;
   };

   link0_codec: codec {
    sound-dai = <&rk817>;
   };
  };

  simple-audio-card,dai-link@1 {
   reg = <1>;
   bitclock-master = <&link1_cpu>;
   format = "pdm";
   frame-master = <&link1_cpu>;

   link1_cpu: cpu {
    sound-dai = <&pdm>;
   };

   link1_codec: codec {
    sound-dai = <&dmic_codec>;
   };
  };
 };

 vbat_4g: regulator-vbat-4g {
  compatible = "regulator-fixed";
  regulator-name = "vbat_4g";
  regulator-min-microvolt = <3800000>;
  regulator-max-microvolt = <3800000>;
  /* powered by vcc_bat, enabled by vbat_4g_en */
  vin-supply = <&vbat_4g_en>;
 };

 vcc_1v8: regulator-vcc-1v8 {
  compatible = "regulator-fixed";
  regulator-name = "vcc_1v8";
  regulator-always-on;
  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <1800000>;
  /* powered by vcc_sys, enabled by vcc_1v8_en */
  vin-supply = <&vcc_1v8_en>;
 };

 vcc_bat: regulator-vcc-bat {
  compatible = "regulator-fixed";
  regulator-name = "vcc_bat";
  regulator-always-on;
  regulator-min-microvolt = <3800000>;
  regulator-max-microvolt = <3800000>;
 };

 vcc_hall_3v3: regulator-vcc-hall-3v3 {
  compatible = "regulator-fixed";
  regulator-name = "vcc_hall_3v3";
  regulator-always-on;
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  vin-supply = <&vcc_sys>;
 };

 vcc_sys: regulator-vcc-sys {
  compatible = "regulator-fixed";
  regulator-name = "vcc_sys";
  regulator-always-on;
  regulator-min-microvolt = <3800000>;
  regulator-max-microvolt = <3800000>;
  vin-supply = <&vcc_bat>;
 };

 vcc_wl: regulator-vcc-wl {
  compatible = "regulator-fixed";
  enable-active-high;
  gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
  pinctrl-0 = <&vcc_wl_pin>;
  pinctrl-names = "default";
  regulator-name = "vcc_wl";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  vin-supply = <&vcc_bat>;
 };

 vdda_0v9: regulator-vdda-0v9 {
  compatible = "regulator-fixed";
  regulator-name = "vdda_0v9";
  regulator-always-on;
  regulator-min-microvolt = <900000>;
  regulator-max-microvolt = <900000>;
  /* powered by vcc_sys, enabled by vcc_1v8_en */
  vin-supply = <&vcc_1v8_en>;
 };
};

&cpu0 {
 cpu-supply = <&vdd_cpu>;
};

&cpu1 {
 cpu-supply = <&vdd_cpu>;
};

&cpu2 {
 cpu-supply = <&vdd_cpu>;
};

&cpu3 {
 cpu-supply = <&vdd_cpu>;
};

&i2c0 {
 status = "okay";

 vdd_cpu: regulator@1c {
  compatible = "tcs,tcs4525";
  reg = <0x1c>;
  fcs,suspend-voltage-selector = <0>;
  regulator-name = "vdd_cpu";
  regulator-min-microvolt = <712500>;
  regulator-max-microvolt = <1390000>;
  regulator-ramp-delay = <2300>;
  regulator-always-on;
  vin-supply = <&vcc_sys>;

  regulator-state-mem {
   regulator-on-in-suspend;
  };
 };

 rk817: pmic@20 {
  compatible = "rockchip,rk817";
  reg = <0x20>;
  interrupt-parent = <&gpio0>;
  interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
  assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
  assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
  clocks = <&cru I2S1_MCLKOUT_TX>;
  clock-names = "mclk";
  #clock-cells = <1>;
  pinctrl-0 = <&i2s1m0_mclk>, <&pmic_int_l>, <&pmic_sleep>;
  pinctrl-names = "default";
  system-power-controller;
  #sound-dai-cells = <0>;
  wakeup-source;

  vcc1-supply = <&vcc_sys>;
  vcc2-supply = <&vcc_sys>;
  vcc3-supply = <&vcc_sys>;
  vcc4-supply = <&vcc_sys>;
  vcc5-supply = <&vcc_sys>;
  vcc6-supply = <&vcc_sys>;
  vcc7-supply = <&vcc_sys>;
  vcc8-supply = <&vcc_sys>;
  vcc9-supply = <&dcdc_boost>;

  regulators {
   vdd_logic: DCDC_REG1 {
    regulator-name = "vdd_logic";
    regulator-always-on;
    regulator-min-microvolt = <500000>;
    regulator-max-microvolt = <1350000>;
    regulator-ramp-delay = <6001>;
    regulator-initial-mode = <0x2>;

    regulator-state-mem {
     regulator-off-in-suspend;
     regulator-suspend-microvolt = <900000>;
    };
   };

   vdd_gpu_npu: DCDC_REG2 {
    regulator-name = "vdd_gpu_npu";
    regulator-min-microvolt = <500000>;
    regulator-max-microvolt = <1350000>;
    regulator-ramp-delay = <6001>;
    regulator-initial-mode = <0x2>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc_ddr: DCDC_REG3 {
    regulator-name = "vcc_ddr";
    regulator-always-on;
    regulator-initial-mode = <0x2>;

    regulator-state-mem {
     regulator-on-in-suspend;
    };
   };

   vcc_3v3: DCDC_REG4 {
    regulator-name = "vcc_3v3";
    regulator-always-on;
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;
    regulator-initial-mode = <0x2>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcca_1v8_pmu: LDO_REG1 {
    regulator-name = "vcca_1v8_pmu";
    regulator-always-on;
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-on-in-suspend;
    };
   };

   /* unused */
   vdda_0v9_ldo: LDO_REG2 {
    regulator-name = "vdda_0v9_ldo";
    regulator-min-microvolt = <900000>;
    regulator-max-microvolt = <900000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vdda_0v9_pmu: LDO_REG3 {
    regulator-name = "vdda_0v9_pmu";
    regulator-always-on;
    regulator-min-microvolt = <900000>;
    regulator-max-microvolt = <900000>;

    regulator-state-mem {
     regulator-on-in-suspend;
    };
   };

   vccio_acodec: LDO_REG4 {
    regulator-name = "vccio_acodec";
    regulator-always-on;
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   /* unused */
   vccio_sd: LDO_REG5 {
    regulator-name = "vccio_sd";
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <3300000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vcc_3v3_pmu: LDO_REG6 {
    regulator-name = "vcc_3v3_pmu";
    regulator-always-on;
    regulator-min-microvolt = <3300000>;
    regulator-max-microvolt = <3300000>;

    regulator-state-mem {
     regulator-on-in-suspend;
    };
   };

   vcc_1v8_en: LDO_REG7 {
    regulator-name = "vcc_1v8_en";
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   vbat_4g_en: LDO_REG8 {
    regulator-name = "vbat_4g_en";
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   sleep_sta_ctl: LDO_REG9 {
    regulator-name = "sleep_sta_ctl";
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <1800000>;

    regulator-state-mem {
     regulator-on-in-suspend;
    };
   };

   dcdc_boost: BOOST {
    regulator-name = "boost";
    regulator-min-microvolt = <5000000>;
    regulator-max-microvolt = <5000000>;

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };

   otg_switch: OTG_SWITCH {
    regulator-name = "otg_switch";

    regulator-state-mem {
     regulator-off-in-suspend;
    };
   };
  };
 };
};

&i2c1 {
 status = "okay";

 digitizer@9 {
  compatible = "wacom,w9013", "hid-over-i2c";
  reg = <0x09>;
  interrupt-parent = <&gpio0>;
  interrupts = <RK_PB6 IRQ_TYPE_LEVEL_LOW>;
  hid-descr-addr = <0x1>;
  pinctrl-0 = <&pen_fwe>, <&pen_irq_l>, <&pen_rst_l>;
  pinctrl-names = "default";
  vdd-supply = <&vcc_3v3_pmu>;
 };
};

&i2c3 {
 pinctrl-0 = <&i2c3m1_xfer>;
 status = "okay";

 led-controller@36 {
  compatible = "ti,lm3630a";
  reg = <0x36>;
  enable-gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
  pinctrl-0 = <&backlight_hwen_h>;
  pinctrl-names = "default";
  #address-cells = <1>;
  #size-cells = <0>;

  led@0 {
   reg = <0>;
   label = "backlight_cool";
   default-brightness = <0>;
  };

  led@1 {
   reg = <1>;
   label = "backlight_warm";
   default-brightness = <0>;
  };
 };

 wusb3801: tcpc@60 {
  compatible = "willsemi,wusb3801";
  reg = <0x60>;
  interrupt-parent = <&gpio0>;
  interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
  pinctrl-0 = <&tcpc_int_l>;
  pinctrl-names = "default";

  connector {
   compatible = "usb-c-connector";
   label = "USB-C";
   vbus-supply = <&otg_switch>;
   power-role = "dual";
   try-power-role = "sink";
   data-role = "dual";
   typec-power-opmode = "default";
   pd-disable;

   ports {
    #address-cells = <0x1>;
    #size-cells = <0x0>;

    port@0 {
     reg = <0x0>;

     typec_hs_usb2phy0: endpoint {
      remote-endpoint = <&usb2phy0_typec_hs>;
     };
    };
   };
  };
 };
};

&i2c5 {
 status = "okay";

 accelerometer@18 {
  compatible = "silan,sc7a20";
  reg = <0x18>;
  interrupt-parent = <&gpio3>;
  interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
  pinctrl-0 = <&accelerometer_int_l>;
  pinctrl-names = "default";
  st,drdy-int-pin = <1>;
  vdd-supply = <&vcc_3v3>;
  vddio-supply = <&vcc_3v3>;
 };
};

&i2s1_8ch {
 pinctrl-0 = <&i2s1m0_lrcktx>, <&i2s1m0_sclktx>, <&i2s1m0_sdi0>, <&i2s1m0_sdo0>;
 rockchip,trcm-sync-tx-only;
 status = "okay";
};

&pdm {
 pinctrl-0 = <&pdmm0_clk1>, <&pdmm0_sdi1>, <&pdmm0_sdi2>;
 /* microphones are on channels 1 and 2 */
 rockchip,path-map = <1>, <2>, <0>, <3>;
 status = "okay";
};

&pinctrl {
 accelerometer {
  accelerometer_int_l: accelerometer-int-l {
   rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 audio-amplifier {
  spk_amp_enable_h: spk-amp-enable-h {
   rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 backlight {
  backlight_hwen_h: backlight-hwen-h {
   rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 bt {
  bt_enable_h: bt-enable-h {
   rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  bt_host_wake_l: bt-host-wake-l {
   rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
  };

  bt_wake_h: bt-wake-h {
   rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 led {
  led_pin: led-pin {
   rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 hall {
  hall_int_l: hall-int-l {
   rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 pen {
  pen_fwe: pen-fwe {
   rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_down>;
  };

  pen_irq_l: pen-irq-l {
   rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  pen_rst_l: pen-rst-l {
   rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 pmic {
  pmic_int_l: pmic-int-l {
   rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
  };

  pmic_sleep: pmic-sleep {
   rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>;
  };
 };

 sdio-pwrseq {
  wifi_enable_h: wifi-enable-h {
   rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 tcpc {
  tcpc_int_l: tcpc-int-l {
   rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
  };
 };

 vcc-wl {
  vcc_wl_pin: vcc-wl-pin {
   rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 wifi {
  wifi_host_wake_l: wifi-host-wake-l {
   rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
  };
 };
};

&pmu_io_domains {
 pmuio1-supply = <&vcc_3v3_pmu>;
 pmuio2-supply = <&vcc_3v3_pmu>;
 vccio1-supply = <&vccio_acodec>;
 vccio2-supply = <&vcc_1v8>;
 vccio3-supply = <&vcc_3v3>;
 vccio4-supply = <&vcca_1v8_pmu>;
 vccio5-supply = <&vcc_3v3>;
 vccio6-supply = <&vcc_3v3>;
 status = "okay";
};

&saradc {
 vref-supply = <&vcc_1v8>;
 status = "okay";
};

&sdhci {
 bus-width = <8>;
 mmc-hs200-1_8v;
 non-removable;
 pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>;
 pinctrl-names = "default";
 vmmc-supply = <&vcc_3v3>;
 vqmmc-supply = <&vcc_1v8>;
 status = "okay";
};

&sdmmc1 {
 bus-width = <4>;
 cap-sd-highspeed;
 cap-sdio-irq;
 keep-power-in-suspend;
 mmc-pwrseq = <&sdio_pwrseq>;
 non-removable;
 pinctrl-0 = <&sdmmc1_bus4>, <&sdmmc1_clk>, <&sdmmc1_cmd>;
 pinctrl-names = "default";
 sd-uhs-sdr104;
 vmmc-supply = <&vcc_wl>;
 vqmmc-supply = <&vcca_1v8_pmu>;
 status = "okay";
};

&tsadc {
 /* tshut mode 0:CRU 1:GPIO */
 rockchip,hw-tshut-mode = <1>;
 /* tshut polarity 0:LOW 1:HIGH */
 rockchip,hw-tshut-polarity = <0>;
 status = "okay";
};

&uart1 {
 dma-names = "tx", "rx";
 pinctrl-0 = <&uart1m0_ctsn>, <&uart1m0_rtsn>, <&uart1m0_xfer>;
 pinctrl-names = "default";
 uart-has-rtscts;
 status = "okay";

 bluetooth {
  compatible = "brcm,bcm43438-bt";
  clocks = <&rk817 1>;
  clock-names = "lpo";
  device-wakeup-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
  host-wakeup-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
  pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>;
  pinctrl-names = "default";
  shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
  vbat-supply = <&vcc_wl>;
  vddio-supply = <&vcca_1v8_pmu>;
 };
};

&uart2 {
 status = "okay";
};

&usb_host0_xhci {
 dr_mode = "otg";
 status = "okay";
};

&usb2phy0 {
 status = "okay";
};

&usb2phy0_otg {
 status = "okay";

 port {
  usb2phy0_typec_hs: endpoint {
   remote-endpoint = <&typec_hs_usb2phy0>;
  };
 };
};

[Dauer der Verarbeitung: 0.13 Sekunden, vorverarbeitet 2026-06-08]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Quellcodebibliothek
     Eigene Quellcodes
     Fremde Quellcodes
     Suchen

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik