Quelle  sm8350-sony-xperia-sagami.dtsi   Sprache: unbekannt

// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
 */

#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sm8350.dtsi"
#include "pm8350.dtsi"
#include "pm8350b.dtsi"
#include "pm8350c.dtsi"
#include "pmk8350.dtsi"
#include "pmr735a.dtsi"
#include "pmr735b.dtsi"

/ {
 /*
  * Yes, you are correct, there is NO MORE {msm,board,pmic}-id on SM8350!
  * Adding it will cause the bootloader to go crazy and randomly crash
  * shortly after closing UEFI boot services.. Perhaps that has something
  * to do with the OS running inside a VM now..?
  */

 chassis-type = "handset";

 chosen {
  #address-cells = <2>;
  #size-cells = <2>;
  ranges;

  framebuffer: framebuffer@e1000000 {
   compatible = "simple-framebuffer";
   reg = <0 0xe1000000 0 0x2300000>;

   /* The display, even though it's 4K, initializes at 1080-ish p */
   width = <1096>;
   height = <2560>;
   stride = <(1096 * 4)>;
   format = "a8r8g8b8";
   /*
    * That's (going to be) a lot of clocks, but it's necessary due
    * to unused clk cleanup & no panel driver yet
    */
   clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
     <&gcc GCC_DISP_SF_AXI_CLK>;
  };
 };

 gpio-keys {
  compatible = "gpio-keys";

  pinctrl-names = "default";
  pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &g_assist_n>;

  key-camera-focus {
   label = "Camera Focus";
   linux,code = <KEY_CAMERA_FOCUS>;
   gpios = <&pm8350b_gpios 8 GPIO_ACTIVE_LOW>;
   debounce-interval = <15>;
   linux,can-disable;
   wakeup-source;
  };

  key-camera-snapshot {
   label = "Camera Snapshot";
   linux,code = <KEY_CAMERA>;
   gpios = <&pm8350b_gpios 5 GPIO_ACTIVE_LOW>;
   debounce-interval = <15>;
   linux,can-disable;
   wakeup-source;
  };

  key-google-assist {
   label = "Google Assistant Key";
   gpios = <&pm8350_gpios 9 GPIO_ACTIVE_LOW>;
   linux,code = <KEY_LEFTMETA>;
   debounce-interval = <15>;
   linux,can-disable;
   wakeup-source;
  };

  key-vol-down {
   label = "Volume Down";
   linux,code = <KEY_VOLUMEDOWN>;
   gpios = <&pmk8350_gpios 3 GPIO_ACTIVE_LOW>;
   debounce-interval = <15>;
   linux,can-disable;
   wakeup-source;
  };
 };

 reserved-memory {
  cont_splash_mem: memory@e1000000 {
   reg = <0 0xe1000000 0 0x2300000>;
   no-map;
  };

  ramoops@ffc00000 {
   compatible = "ramoops";
   reg = <0 0xffc00000 0 0x100000>;
   console-size = <0x40000>;
   record-size = <0x1000>;
   no-map;
  };
 };

 vph_pwr: vph-pwr-regulator {
  compatible = "regulator-fixed";
  regulator-name = "vph_pwr";
  regulator-min-microvolt = <3700000>;
  regulator-max-microvolt = <3700000>;

  regulator-always-on;
  regulator-boot-on;
 };
};

&adsp {
 status = "okay";
 firmware-name = "qcom/sm8350/Sony/sagami/adsp.mbn";
};

&apps_rsc {
 regulators-0 {
  compatible = "qcom,pm8350-rpmh-regulators";
  qcom,pmic-id = "b";

  vdd-s1-supply = <&vph_pwr>;
  vdd-s2-supply = <&vph_pwr>;
  vdd-s3-supply = <&vph_pwr>;
  vdd-s4-supply = <&vph_pwr>;
  vdd-s5-supply = <&vph_pwr>;
  vdd-s6-supply = <&vph_pwr>;
  vdd-s7-supply = <&vph_pwr>;
  vdd-s8-supply = <&vph_pwr>;
  vdd-s9-supply = <&vph_pwr>;
  vdd-s10-supply = <&vph_pwr>;
  vdd-s11-supply = <&vph_pwr>;
  vdd-s12-supply = <&vph_pwr>;

  vdd-l1-l4-supply = <&pm8350_s11>;
  vdd-l2-l7-supply = <&vreg_bob>;
  vdd-l3-l5-supply = <&vreg_bob>;
  vdd-l6-l9-l10-supply = <&pm8350_s11>;

  /*
   * ARC regulators:
   * S5 - mx.lvl
   * S6 - gfx.lvl
   * S9 - mxc.lvl
   */

  pm8350_s10: smps10 {
   regulator-name = "pm8350_s10";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350_s11: smps11 {
   regulator-name = "pm8350_s11";
   regulator-min-microvolt = <752000>;
   regulator-max-microvolt = <1000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350_s12: smps12 {
   regulator-name = "pm8350_s12";
   regulator-min-microvolt = <1224000>;
   regulator-max-microvolt = <1360000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350_l1: ldo1 {
   regulator-name = "pm8350_l1";
   regulator-min-microvolt = <912000>;
   regulator-max-microvolt = <920000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350_l2: ldo2 {
   regulator-name = "pm8350_l2";
   regulator-min-microvolt = <3072000>;
   regulator-max-microvolt = <3072000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350_l3: ldo3 {
   regulator-name = "pm8350_l3";
   regulator-min-microvolt = <904000>;
   regulator-max-microvolt = <904000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  /* L4 - lmx.lvl (ARC) */

  pm8350_l5: ldo5 {
   regulator-name = "pm8350_l5";
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <888000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350_l6: ldo6 {
   regulator-name = "pm8350_l6";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1208000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350_l7: ldo7 {
   regulator-name = "pm8350_l7";
   regulator-min-microvolt = <2400000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };

  /* L8 - lcx.lvl (ARC) */

  pm8350_l9: ldo9 {
   regulator-name = "pm8350_l9";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-allow-set-load;
   regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
         RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-1 {
  compatible = "qcom,pm8350c-rpmh-regulators";
  qcom,pmic-id = "c";

  vdd-s1-supply = <&vph_pwr>;
  vdd-s2-supply = <&vph_pwr>;
  vdd-s3-supply = <&vph_pwr>;
  vdd-s4-supply = <&vph_pwr>;
  vdd-s5-supply = <&vph_pwr>;
  vdd-s6-supply = <&vph_pwr>;
  vdd-s7-supply = <&vph_pwr>;
  vdd-s8-supply = <&vph_pwr>;
  vdd-s9-supply = <&vph_pwr>;
  vdd-s10-supply = <&vph_pwr>;

  vdd-l1-l12-supply = <&pm8350c_s1>;
  vdd-l2-l8-supply = <&pm8350c_s1>;
  vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
  vdd-l6-l9-l11-supply = <&vreg_bob>;
  vdd-l10-supply = <&pm8350_s12>;

  vdd-bob-supply = <&vph_pwr>;

  pm8350c_s1: smps1 {
   regulator-name = "pm8350c_s1";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1952000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  /* S2 - ebi.lvl (ARC) */

  pm8350c_s3: smps3 {
   regulator-name = "pm8350c_s3";
   regulator-min-microvolt = <300000>;
   regulator-max-microvolt = <704000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  /*
   * ARC regulators:
   * S4 - mss.lvl
   * S6 - cx.lvl
   * S8 - mmcx.lvl
   */

  pm8350c_s10: smps10 {
   regulator-name = "pm8350c_s10";
   regulator-min-microvolt = <1048000>;
   regulator-max-microvolt = <1128000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350c_l1: ldo1 {
   regulator-name = "pm8350c_l1";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350c_l2: ldo2 {
   regulator-name = "pm8350c_l2";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350c_l3: ldo3 {
   regulator-name = "pm8350c_l3";
   regulator-min-microvolt = <3304000>;
   regulator-max-microvolt = <3304000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350c_l4: ldo4 {
   regulator-name = "pm8350c_l4";
   regulator-min-microvolt = <1704000>;
   regulator-max-microvolt = <3000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350c_l5: ldo5 {
   regulator-name = "pm8350c_l5";
   regulator-min-microvolt = <1704000>;
   regulator-max-microvolt = <3000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350c_l6: ldo6 {
   regulator-name = "pm8350c_l6";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350c_l7: ldo7 {
   regulator-name = "pm8350c_l7";
   regulator-min-microvolt = <3008000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350c_l8: ldo8 {
   regulator-name = "pm8350c_l8";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350c_l9: ldo9 {
   regulator-name = "pm8350c_l9";
   regulator-min-microvolt = <2960000>;
   /* Originally max = 3008000 but SDHCI expects 2960000 */
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350c_l10: ldo10 {
   regulator-name = "pm8350c_l10";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350c_l11: ldo11 {
   regulator-name = "pm8350c_l11";
   regulator-min-microvolt = <2400000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350c_l12: ldo12 {
   regulator-name = "pm8350c_l12";
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <2000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  pm8350c_l13: ldo13 {
   regulator-name = "pm8350c_l13";
   regulator-min-microvolt = <3000000>;
   regulator-max-microvolt = <3000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_bob: bob {
   regulator-name = "vreg_bob";
   regulator-min-microvolt = <3400000>;
   regulator-max-microvolt = <3960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
  };
 };

 /* TODO: Add pm8350b (just one ldo) once the driver part is in */

 regulators-2 {
  compatible = "qcom,pmr735a-rpmh-regulators";
  qcom,pmic-id = "e";

  vdd-s1-supply = <&vph_pwr>;
  vdd-s2-supply = <&vph_pwr>;
  vdd-s3-supply = <&vph_pwr>;

  vdd-l1-l2-supply = <&pmr735a_s2>;
  vdd-l3-supply = <&pmr735a_s1>;
  vdd-l4-supply = <&pm8350c_s1>;
  vdd-l5-l6-supply = <&pm8350c_s1>;
  vdd-l7-bob-supply = <&vreg_bob>;

  pmr735a_s1: smps1 {
   regulator-name = "pmr735a_s1";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1280000>;
  };

  pmr735a_s2: smps2 {
   regulator-name = "pmr735a_s2";
   regulator-min-microvolt = <500000>;
   regulator-max-microvolt = <976000>;
  };

  pmr735a_s3: smps3 {
   regulator-name = "pmr735a_s3";
   regulator-min-microvolt = <2208000>;
   regulator-max-microvolt = <2352000>;
  };

  pmr735a_l1: ldo1 {
   regulator-name = "pmr735a_l1";
   regulator-min-microvolt = <912000>;
   regulator-max-microvolt = <912000>;
  };

  pmr735a_l2: ldo2 {
   regulator-name = "pmr735a_l2";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
  };

  pmr735a_l3: ldo3 {
   regulator-name = "pmr735a_l3";
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
  };

  pmr735a_l4: ldo4 {
   regulator-name = "pmr735a_l4";
   regulator-min-microvolt = <1776000>;
   regulator-max-microvolt = <1872000>;
  };

  pmr735a_l5: ldo5 {
   regulator-name = "pmr735a_l5";
   regulator-min-microvolt = <800000>;
   regulator-max-microvolt = <800000>;
  };

  pmr735a_l6: ldo6 {
   regulator-name = "pmr735a_l6";
   regulator-min-microvolt = <480000>;
   regulator-max-microvolt = <904000>;
  };

  pmr735a_l7: ldo7 {
   regulator-name = "pmr735a_l7";
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2800000>;
  };
 };
};

&cdsp {
 status = "okay";
 firmware-name = "qcom/sm8350/Sony/sagami/cdsp.mbn";
};

&i2c1 {
 status = "okay";
 clock-frequency = <1000000>;

 /* Some subset of SONY IMX663 camera sensor @ 38 */
};

&i2c4 {
 status = "okay";
 clock-frequency = <400000>;

 /* Samsung Touchscreen (needs I2C GPI DMA) @ 48 */
};

&i2c11 {
 status = "okay";
 clock-frequency = <1000000>;

 cs35l41_l: speaker-amp@40 {
  compatible = "cirrus,cs35l41";
  reg = <0x40>;
  interrupt-parent = <&tlmm>;
  interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
  reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
  cirrus,boost-peak-milliamp = <4000>;
  cirrus,boost-ind-nanohenry = <1000>;
  cirrus,boost-cap-microfarad = <15>;
  cirrus,asp-sdout-hiz = <3>;
  cirrus,gpio2-src-select = <2>;
  cirrus,gpio2-output-enable;
  #sound-dai-cells = <1>;
 };

 cs35l41_r: speaker-amp@41 {
  compatible = "cirrus,cs35l41";
  reg = <0x41>;
  interrupt-parent = <&tlmm>;
  interrupts = <36 IRQ_TYPE_LEVEL_LOW>;
  reset-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
  cirrus,boost-peak-milliamp = <4000>;
  cirrus,boost-ind-nanohenry = <1000>;
  cirrus,boost-cap-microfarad = <15>;
  cirrus,asp-sdout-hiz = <3>;
  cirrus,gpio2-src-select = <2>;
  cirrus,gpio2-output-enable;
  #sound-dai-cells = <1>;
 };
};

&i2c12 {
 status = "okay";
 /* Clock frequency was not specified downstream, let's park it to 100 KHz */
 clock-frequency = <100000>;

 /* AMS TCS3490 RGB+IR color sensor @ 72 */
};

&i2c13 {
 status = "okay";
 /* Clock frequency was not specified downstream, let's park it to 100 KHz */
 clock-frequency = <100000>;

 /* Qualcomm PM8008i/PM8008j (?) @ 8, 9, c, d */
};

&i2c15 {
 status = "okay";
 clock-frequency = <400000>;

 /* NXP SN1X0 NFC @ 28 */
};

&i2c17 {
 status = "okay";
 clock-frequency = <1000000>;

 /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
};

&ipa {
 qcom,gsi-loader = "self";
 memory-region = <&pil_ipa_fw_mem>;
 firmware-name = "qcom/sm8350/Sony/sagami/ipa_fws.mbn";
 status = "okay";
};

&mpss {
 status = "okay";
 firmware-name = "qcom/sm8350/Sony/sagami/modem.mbn";
};

&pm8350_gpios {
 gpio-line-names = "ASSIGN1_THERM", /* GPIO_1 */
     "LCD_ID",
     "SDR_MMW_THERM",
     "RF_ID",
     "NC",
     "FP_LDO_EN",
     "SP_ARI_PWR_ALARM",
     "NC",
     "G_ASSIST_N",
     "PM8350_OPTION"; /* GPIO_10 */

 g_assist_n: g-assist-n-state {
  pins = "gpio9";
  function = "normal";
  power-source = <1>;
  bias-pull-up;
  input-enable;
 };
};

&pm8350b_gpios {
 snapshot_n: snapshot-n-state {
  pins = "gpio5";
  function = "normal";
  power-source = <0>;
  bias-pull-up;
  input-enable;
 };

 focus_n: focus-n-state {
  pins = "gpio8";
  function = "normal";
  power-source = <0>;
  input-enable;
  bias-pull-up;
 };
};

&pmk8350_gpios {
 gpio-line-names = "NC", /* GPIO_1 */
     "NC",
     "VOL_DOWN_N",
     "PMK8350_OPTION";

 vol_down_n: vol-down-n-state {
  pins = "gpio3";
  function = "normal";
  power-source = <0>;
  bias-pull-up;
  input-enable;
 };
};

&pmk8350_rtc {
 status = "okay";
};

&pon_pwrkey {
 status = "okay";
};

&pon_resin {
 status = "okay";
 linux,code = <KEY_VOLUMEUP>;
};

&qupv3_id_0 {
 status = "okay";
};

&qupv3_id_1 {
 status = "okay";
};

&qupv3_id_2 {
 status = "okay";
};

&sdhc_2 {
 cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
 pinctrl-names = "default", "sleep";
 pinctrl-0 = <&sdc2_default_state &sdc2_card_det_active>;
 pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_sleep>;
 vmmc-supply = <&pm8350c_l9>;
 vqmmc-supply = <&pm8350c_l6>;
 no-sdio;
 no-mmc;
 status = "okay";
};

&slpi {
 status = "okay";
 firmware-name = "qcom/sm8350/Sony/sagami/slpi.mbn";
};

&spi14 {
 status = "okay";

 /* NXP SN1X0 NFC Secure Element @ 0 */
};

&tlmm {
 gpio-reserved-ranges = <44 4>;
 gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
     "APPS_I2C_0_SCL",
     "UWIDEC_PWR_EN",
     "HAP_RST_N",
     "NC",
     "NC",
     "PM8008_1_RESET_N",
     "NC",
     "OIS_TELE_I2C_SDA",
     "OIS_TELE_I2C_SCL",
     "PM8350_OPTION", /* GPIO_10 */
     "NC",
     "APPS_I2C_1_SDA",
     "APPS_I2C_1_SCL",
     "NC",
     "NC",
     "CAM1_RESET_N",
     "LEO_CAM0_RESET_N",
     "DEBUG_UART_TX",
     "DEBUG_UART_RX",
     "TS_I2C_SDA", /* GPIO_20 */
     "TS_I2C_SCL",
     "TS_RESET_N",
     "TS_INT_N",
     "DISP_RESET_N",
     "SW_SERVICE",
     "DISP_ERR_FG",
     "TX_GTR_THRES_IN",
     "NC",
     "NC",
     "NC", /* GPIO_30 */
     "NC",
     "NC",
     "NC",
     "NC",
     "NC",
     "SPK_AMP_INT_N",
     "SPK_AMP_RESET_N",
     "FP_INT_N",
     "FP_RESET_N",
     "NC", /* GPIO_40 */
     "NC",
     "DEBUG_GPIO0",
     "FORCE_USB_BOOT",
     "FP_SPI_MISO",
     "FP_SPI_MOSI",
     "FP_SPI_CLK",
     "FP_SPI_CS_N",
     "SPK_AMP_I2C_SDA",
     "SPK_AMP_I2C_SCL",
     "NC", /* GPIO_50 */
     "HAP_INT_N",
     "CAMSENSOR_I2C_SDA",
     "CAMSENSOR_I2C_SCL",
     "SBU_SW_OE",
     "SBU_SW_SEL",
     "NFC_ESE_SPI_MISO",
     "NFC_ESE_SPI_MOSI",
     "NFC_ESE_SPI_CLK",
     "NFC_ESE_SPI_CS",
     "NFC_I2C_SDA", /* GPIO_60 */
     "NFC_I2C_SCL",
     "NFC_EN",
     "NFC_CLK_REQ",
     "HST_WLAN_EN",
     "HST_BT_EN",
     "HW_ID_0",
     "HW_ID_1",
     "HST_BT_UART_CTS",
     "HST_BT_UART_RFR",
     "HST_BT_UART_TX", /* GPIO_70 */
     "HST_BT_UART_RX",
     "HAP_I2C_SDA",
     "HAP_I2C_SCL",
     "RF_LCD_ID_EN",
     "RF_ID_EXTENSION",
     "NC",
     "NC",
     "NC",
     "NC",
     "HALL_INT_N", /* GPIO_80 */
     "USB_CC_DIR",
     "DISP_VSYNC",
     "NC",
     "NC",
     "CAM_SOF_TELE",
     "NFC_DWL_REQ",
     "NFC_IRQ",
     "WCD_RST_N",
     "ALS_PROX_INT_N",
     "NC", /* GPIO_90 */
     "NC",
     "TRAY_DET",
     "UDON_SWITCH_SEL",
     "PCIE0_RESET_N",
     "PCIE0_CLK_REQ_N",
     "PCIE0_WAKE_N",
     "CAM_SOF",
     "RF_ID_EXTENSION_2",
     "RGBC_IR_INT",
     "CAM_MCLK0", /* GPIO_100 */
     "CAM_MCLK1",
     "CAM_MCLK2",
     "CAM_MCLK3",
     "NC",
     "NC",
     "CAM2_RESET_N",
     "CCI_I2C0_SDA",
     "CCI_I2C0_SCL",
     "CCI_I2C1_SDA",
     "CCI_I2C1_SCL", /* GPIO_110 */
     "CCI_I2C2_SDA",
     "CCI_I2C2_SCL",
     "CCI_I2C3_SDA",
     "CCI_I2C3_SCL",
     "NC",
     "PM8008_1_IRQ",
     "CAM3_RESET_N",
     "IMU1_INT",
     "EXT_VD0_XVS",
     "NC", /* GPIO_120 */
     "NC",
     "NC",
     "NC",
     "NC",
     "HAP_I2S_CLK",
     "HAP_I2S_DOUT",
     "HAP_TRG1",
     "HAP_I2S_SYNC",
     "HST_BT_WLAN_SLIMBUS_CLK",
     "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
     "NC",
     "UIM2_DETECT_EN",
     "UIM2_DATA",
     "UIM2_CLK",
     "UIM2_RESET",
     "UIM2_PRESENT",
     "UIM1_DATA",
     "UIM1_CLK",
     "UIM1_RESET",
     "TRAY_DET", /* GPIO_140 */
     "SM_RFFE0_CLK",
     "SM_RFFE0_DATA",
     "SM_RFFE1_CLK",
     "SM_RFFE1_DATA",
     "SM_MSS_GRFC4",
     "SM_MSS_GRFC5",
     "SM_MSS_GRFC6",
     "SM_MSS_GRFC7",
     "SM_RFFE4_CLK",
     "SM_RFFE4_DATA", /* GPIO_150 */
     "WLAN_COEX_UART1_RX",
     "WLAN_COEX_UART1_TX",
     "HST_SW_CTRL",
     "DISP_VDDR_EN",
     "NC",
     "NC",
     "PA_INDICATOR_OR",
     "NC",
     "QLINK0_REQ",
     "QLINK0_EN", /* GPIO_160 */
     "QLINK0_WMSS_RESET_N",
     "NC",
     "NC",
     "NC",
     "PM8008_2_IRQ",
     "TELEC_PWR_EN",
     "PM8008_2_RESET_N",
     "WCD_SWR_TX_CLK",
     "WCD_SWR_TX_DATA0",
     "WCD_SWR_TX_DATA1", /* GPIO_170 */
     "WCD_SWR_RX_CLK",
     "WCD_SWR_RX_DATA0",
     "WCD_SWR_RX_DATA1",
     "SM_DMIC1_CLK",
     "SM_DMIC1_DATA",
     "SM_DMIC2_CLK",
     "SM_DMIC2_DATA",
     "SPK_AMP_I2S_CLK",
     "SPK_AMP_I2S_WS",
     "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
     "SPK_AMP_I2S_ASP_DOUT",
     "WCD_SWR_TX_DATA2",
     "NC",
     "NC",
     "NC",
     "NC",
     "IMU_SPI_MISO",
     "IMU_SPI_MOSI",
     "IMU_SPI_CLK",
     "IMU_SPI_CS_N", /* GPIO_190 */
     "MAG_I2C_SDA",
     "MAG_I2C_SCL",
     "SENSOR_I2C_SDA",
     "SENSOR_I2C_SCL",
     "NC",
     "NC",
     "NC",
     "NC",
     "HST_BLE_UART_TX",
     "HST_BLE_UART_RX", /* GPIO_200 */
     "HST_WLAN_UART_TX",
     "HST_WLAN_UART_RX";

 ts_int_default: ts-int-default-state {
  pins = "gpio23";
  function = "gpio";
  drive-strength = <2>;
  bias-disable;
 };

 sdc2_card_det_active: sd-card-det-active-state {
  pins = "gpio92";
  function = "gpio";
  drive-strength = <2>;
  bias-pull-up;
 };

 sdc2_card_det_sleep: sd-card-det-sleep-state {
  pins = "gpio92";
  function = "gpio";
  drive-strength = <2>;
  bias-disable;
 };
};

/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
&ufs_mem_hc { status = "disabled"; };
&ufs_mem_phy { status = "disabled"; };

&usb_1 {
 status = "okay";
};

&usb_1_dwc3 {
 dr_mode = "peripheral";
};

&usb_1_hsphy {
 status = "okay";

 vdda-pll-supply = <&pm8350_l5>;
 vdda18-supply = <&pm8350c_l1>;
 vdda33-supply = <&pm8350_l2>;
};

&usb_1_qmpphy {
 status = "okay";

 vdda-phy-supply = <&pm8350_l6>;
 vdda-pll-supply = <&pm8350_l1>;
};