Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  sc8280xp-pmics.dtsi   Sprache: unbekannt

 
// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2022, Linaro Limited
 */

#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>

/ {
 thermal-zones {
  pm8280_1_thermal: pm8280-1-thermal {
   polling-delay-passive = <100>;

   thermal-sensors = <&pm8280_1_temp_alarm>;

   trips {
    trip0 {
     temperature = <95000>;
     hysteresis = <0>;
     type = "passive";
    };

    trip1 {
     temperature = <115000>;
     hysteresis = <0>;
     type = "critical";
    };
   };
  };

  pmc8280c_thermal: pmc8280c-thermal {
   polling-delay-passive = <100>;

   thermal-sensors = <&pmc8280c_temp_alarm>;

   trips {
    trip0 {
     temperature = <95000>;
     hysteresis = <0>;
     type = "passive";
    };

    trip1 {
     temperature = <115000>;
     hysteresis = <0>;
     type = "critical";
    };
   };
  };

  pm8280_2_thermal: pm8280-2-thermal {
   polling-delay-passive = <100>;

   thermal-sensors = <&pm8280_2_temp_alarm>;

   trips {
    trip0 {
     temperature = <95000>;
     hysteresis = <0>;
     type = "passive";
    };

    trip1 {
     temperature = <115000>;
     hysteresis = <0>;
     type = "critical";
    };
   };
  };

  pmr735a_thermal: pmr735a-thermal {
   polling-delay-passive = <100>;

   thermal-sensors = <&pmr735a_temp_alarm>;

   trips {
    trip0 {
     temperature = <95000>;
     hysteresis = <0>;
     type = "passive";
    };

    trip1 {
     temperature = <115000>;
     hysteresis = <0>;
     type = "critical";
    };
   };
  };
 };
};

&spmi_bus {
 pmk8280: pmic@0 {
  compatible = "qcom,pmk8350", "qcom,spmi-pmic";
  reg = <0x0 SPMI_USID>;
  #address-cells = <1>;
  #size-cells = <0>;

  pmk8280_pon: pon@1300 {
   compatible = "qcom,pmk8350-pon";
   reg = <0x1300>, <0x800>;
   reg-names = "hlos", "pbs";

   pmk8280_pon_pwrkey: pwrkey {
    compatible = "qcom,pmk8350-pwrkey";
    interrupts-extended = <&spmi_bus 0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
    linux,code = <KEY_POWER>;
    status = "disabled";
   };

   pmk8280_pon_resin: resin {
    compatible = "qcom,pmk8350-resin";
    interrupts-extended = <&spmi_bus 0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
    status = "disabled";
   };
  };

  pmk8280_vadc: adc@3100 {
   compatible = "qcom,spmi-adc7";
   reg = <0x3100>;
   interrupts-extended = <&spmi_bus 0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
   #address-cells = <1>;
   #size-cells = <0>;
   #io-channel-cells = <1>;

   channel@3 {
    reg = <PMK8350_ADC7_DIE_TEMP>;
    qcom,pre-scaling = <1 1>;
    label = "pmk8350_die_temp";
   };

   channel@44 {
    reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
    qcom,hw-settle-time = <200>;
    qcom,ratiometric;
    label = "pmk8350_xo_therm";
   };

   channel@103 {
    reg = <PM8350_ADC7_DIE_TEMP(1)>;
    qcom,pre-scaling = <1 1>;
    label = "pmc8280_1_die_temp";
   };

   channel@303 {
    reg = <PM8350_ADC7_DIE_TEMP(3)>;
    qcom,pre-scaling = <1 1>;
    label = "pmc8280_2_die_temp";
   };

   channel@403 {
    reg = <PMR735A_ADC7_DIE_TEMP>;
    qcom,pre-scaling = <1 1>;
    label = "pmr735a_die_temp";
   };
  };

  pmk8280_adc_tm: adc-tm@3400 {
   compatible = "qcom,spmi-adc-tm5-gen2";
   reg = <0x3400>;
   interrupts-extended = <&spmi_bus 0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
   #address-cells = <1>;
   #size-cells = <0>;
   #thermal-sensor-cells = <1>;
   status = "disabled";
  };

  pmk8280_rtc: rtc@6100 {
   compatible = "qcom,pmk8350-rtc";
   reg = <0x6100>, <0x6200>;
   reg-names = "rtc", "alarm";
   interrupts-extended = <&spmi_bus 0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
   wakeup-source;
   status = "disabled";
  };

  pmk8280_sdam_6: nvram@8500 {
   compatible = "qcom,spmi-sdam";
   reg = <0x8500>;
   #address-cells = <1>;
   #size-cells = <1>;
   ranges = <0 0x8500 0x100>;
   status = "disabled";
  };
 };

 pmc8280_1: pmic@1 {
  compatible = "qcom,pm8350", "qcom,spmi-pmic";
  reg = <0x1 SPMI_USID>;
  #address-cells = <1>;
  #size-cells = <0>;

  pm8280_1_temp_alarm: temp-alarm@a00 {
   compatible = "qcom,spmi-temp-alarm";
   reg = <0xa00>;
   interrupts-extended = <&spmi_bus 0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
   io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(1)>;
   io-channel-names = "thermal";
   #thermal-sensor-cells = <0>;
  };

  pmc8280_1_gpios: gpio@8800 {
   compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
   reg = <0x8800>;
   gpio-controller;
   gpio-ranges = <&pmc8280_1_gpios 0 0 10>;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
  };
 };

 pmc8280c: pmic@2 {
  compatible = "qcom,pm8350c", "qcom,spmi-pmic";
  reg = <0x2 SPMI_USID>;
  #address-cells = <1>;
  #size-cells = <0>;

  pmc8280c_temp_alarm: temp-alarm@a00 {
   compatible = "qcom,spmi-temp-alarm";
   reg = <0xa00>;
   interrupts-extended = <&spmi_bus 0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
   #thermal-sensor-cells = <0>;
  };

  pmc8280c_gpios: gpio@8800 {
   compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio";
   reg = <0x8800>;
   gpio-controller;
   gpio-ranges = <&pmc8280c_gpios 0 0 9>;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
  };

  pmc8280c_lpg: pwm {
   compatible = "qcom,pm8350c-pwm";

   #address-cells = <1>;
   #size-cells = <0>;

   #pwm-cells = <2>;

   status = "disabled";
  };
 };

 pmc8280_2: pmic@3 {
  compatible = "qcom,pm8350", "qcom,spmi-pmic";
  reg = <0x3 SPMI_USID>;
  #address-cells = <1>;
  #size-cells = <0>;

  pm8280_2_temp_alarm: temp-alarm@a00 {
   compatible = "qcom,spmi-temp-alarm";
   reg = <0xa00>;
   interrupts-extended = <&spmi_bus 0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
   io-channels = <&pmk8280_vadc PM8350_ADC7_DIE_TEMP(3)>;
   io-channel-names = "thermal";
   #thermal-sensor-cells = <0>;
  };

  pmc8280_2_gpios: gpio@8800 {
   compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio";
   reg = <0x8800>;
   gpio-controller;
   gpio-ranges = <&pmc8280_2_gpios 0 0 10>;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
  };
 };

 pmr735a: pmic@4 {
  compatible = "qcom,pmr735a", "qcom,spmi-pmic";
  reg = <0x4 SPMI_USID>;
  #address-cells = <1>;
  #size-cells = <0>;

  pmr735a_temp_alarm: temp-alarm@a00 {
   compatible = "qcom,spmi-temp-alarm";
   reg = <0xa00>;
   interrupts-extended = <&spmi_bus 0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
   io-channels = <&pmk8280_vadc PMR735A_ADC7_DIE_TEMP>;
   io-channel-names = "thermal";
   #thermal-sensor-cells = <0>;
  };

  pmr735a_gpios: gpio@8800 {
   compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio";
   reg = <0x8800>;
   gpio-controller;
   gpio-ranges = <&pmr735a_gpios 0 0 4>;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
  };
 };
};

[ Dauer der Verarbeitung: 0.2 Sekunden  (vorverarbeitet)  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge