Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  mt8173-elm-hana.dtsi   Sprache: unbekannt

 
// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright 2016 MediaTek Inc.
 */

#include "mt8173-elm.dtsi"

&i2c0 {
 clock-frequency = <200000>;
};

&i2c3 {
 touchscreen2: touchscreen@34 {
  compatible = "melfas,mip4_ts";
  reg = <0x34>;
  interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
  status = "fail-needs-probe";
 };

 /*
  * Lenovo 100e Chromebook 2nd Gen (MTK) and Lenovo 300e Chromebook 2nd
  * Gen (MTK) are using synaptics touchscreen (hid-over-i2c driver) as a
  * second source touchscreen.
  */
 touchscreen3: touchscreen@20 {
  compatible = "hid-over-i2c";
  reg = <0x20>;
  hid-descr-addr = <0x0020>;
  interrupts-extended = <&pio 88 IRQ_TYPE_LEVEL_LOW>;
  status = "fail-needs-probe";
 };

 /* Lenovo Ideapad C330 uses G2Touch touchscreen as a 2nd source touchscreen */
 touchscreen@40 {
  compatible = "hid-over-i2c";
  reg = <0x40>;
  hid-descr-addr = <0x0001>;
  interrupt-parent = <&pio>;
  interrupts = <88 IRQ_TYPE_LEVEL_LOW>;
  status = "fail-needs-probe";
 };
};

&i2c4 {
 /*
  * Lenovo 100e Chromebook 2nd Gen (MTK) and Lenovo 300e Chromebook 2nd
  * Gen (MTK) are using synaptics trackpad (hid-over-i2c driver) as a
  * second source trackpad.
  */
 trackpad2: trackpad@2c {
  compatible = "hid-over-i2c";
  interrupts-extended = <&pio 117 IRQ_TYPE_LEVEL_LOW>;
  pinctrl-names = "default";
  pinctrl-0 = <&trackpad_irq>;
  reg = <0x2c>;
  hid-descr-addr = <0x0020>;
  /*
   * The trackpad needs a post-power-on delay of 100ms,
   * but at time of writing, the power supply for it on
   * this board is always on. The delay is therefore not
   * added to avoid impacting the readiness of the
   * trackpad.
   */
  vdd-supply = <&mt6397_vgp6_reg>;
  wakeup-source;
  status = "fail-needs-probe";
 };
};

&mmc1 {
 wp-gpios = <&pio 42 GPIO_ACTIVE_HIGH>;
};

&pio {
 hdmi_mux_pins: hdmi_mux_pins {
  pins2 {
   pinmux = <MT8173_PIN_98_URTS1__FUNC_GPIO98>;
   bias-pull-up;
   output-high;
  };
 };

 mmc1_pins_default: mmc1default {
  pins_wp {
   pinmux = <MT8173_PIN_42_DSI_TE__FUNC_GPIO42>;
   input-enable;
   bias-pull-up;
  };
 };
};

&touchscreen {
 status = "fail-needs-probe";
};

&trackpad {
 status = "fail-needs-probe";
};

[ Dauer der Verarbeitung: 0.17 Sekunden  (vorverarbeitet)  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge