Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  imx8mp-venice-gw82xx.dtsi   Sprache: unbekannt

 
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright 2024 Gateworks Corporation
 */

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/phy/phy-imx8-pcie.h>

/ {
 aliases {
  ethernet1 = ð1;
  fsa1 = &fsa0;
  fsa2 = &fsa1;
 };

 led-controller {
  compatible = "gpio-leds";
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_gpio_leds>;

  led-0 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_GREEN>;
   gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
   default-state = "on";
   linux,default-trigger = "heartbeat";
  };

  led-1 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_RED>;
   gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
   default-state = "off";
  };
 };

 pcie0_refclk: clock-pcie0 {
  compatible = "fixed-clock";
  #clock-cells = <0>;
  clock-frequency = <100000000>;
 };

 pps {
  compatible = "pps-gpio";
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_pps>;
  gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
 };

 reg_usb2_vbus: regulator-usb2 {
  compatible = "regulator-fixed";
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_reg_usb2_en>;
  regulator-name = "usb2_vbus";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
  enable-active-high;
 };

 reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
  compatible = "regulator-fixed";
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
  regulator-name = "VDD_3V3_SD";
  regulator-max-microvolt = <3300000>;
  regulator-min-microvolt = <3300000>;
  gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
  enable-active-high;
  off-on-delay-us = <12000>;
  startup-delay-us = <100>;
 };
};

&ecspi2 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_spi2>;
 cs-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>, /* CS0 onboard TPM */
     <&gpio5 13 GPIO_ACTIVE_LOW>, /* CS1 off-board J32 SPI */
     <&gpio1 12 GPIO_ACTIVE_LOW>, /* CS3 off-board J52 FSA1 */
     <&gpio4 26 GPIO_ACTIVE_LOW>; /* CS2 off-board J51 FSA2 */
 status = "okay";

 tpm@0 {
  compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
  reg = <0x0>;
  spi-max-frequency = <10000000>;
 };
};

&flexcan1 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_can1>;
 status = "okay";
};

&flexcan2 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_can2>;
 status = "okay";
};

&gpio1 {
 gpio-line-names =
  "", "", "", "",
  "", "", "", "",
  "", "", "", "",
  "", "fsa2_gpio1", "", "",
  "", "", "", "",
  "", "", "", "",
  "", "", "", "",
  "", "", "", "";
};

&gpio4 {
 gpio-line-names =
  "", "", "", "",
  "", "", "", "",
  "dio1", "fsa1_gpio2", "", "dio0",
  "", "", "", "",
  "", "", "", "",
  "", "", "rs485_en", "rs485_term",
  "fsa2_gpio2", "fsa1_gpio1", "", "rs485_half",
  "", "", "", "";
};

&i2c2 {
 accelerometer@19 {
  compatible = "st,lis2de12";
  reg = <0x19>;
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_accel>;
  interrupt-parent = <&gpio4>;
  interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
  st,drdy-int-pin = <1>;
 };

 magnetometer@1e {
  compatible = "st,lis2mdl";
  reg = <0x1e>;
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_mag>;
  interrupt-parent = <&gpio4>;
  interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
 };
};

&i2c3 {
 i2c-mux@70 {
  compatible = "nxp,pca9548";
  reg = <0x70>;
  #address-cells = <1>;
  #size-cells = <0>;

  /* J30 */
  fsa1: i2c@0 {
   reg = <0>;
   pinctrl-names = "default";
   pinctrl-0 = <&pinctrl_fsa2i2c>;
   #address-cells = <1>;
   #size-cells = <0>;

   gpio@20 {
    compatible = "nxp,pca9555";
    reg = <0x20>;
    interrupt-parent = <&gpio4>;
    interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
    interrupt-controller;
    #interrupt-cells = <2>;
    gpio-controller;
    #gpio-cells = <2>;
   };

   eeprom@54 {
    compatible = "atmel,24c02";
    reg = <0x54>;
    pagesize = <16>;
   };

   eeprom@55 {
    compatible = "atmel,24c02";
    reg = <0x55>;
    pagesize = <16>;
   };
  };

  /* J29 */
  fsa0: i2c@1 {
   reg = <1>;
   pinctrl-names = "default";
   pinctrl-0 = <&pinctrl_fsa1i2c>;
   #address-cells = <1>;
   #size-cells = <0>;

   gpio@20 {
    compatible = "nxp,pca9555";
    reg = <0x20>;
    interrupt-parent = <&gpio4>;
    interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
    interrupt-controller;
    #interrupt-cells = <2>;
    gpio-controller;
    #gpio-cells = <2>;
   };

   eeprom@54 {
    compatible = "atmel,24c02";
    reg = <0x54>;
    pagesize = <16>;
   };

   eeprom@55 {
    compatible = "atmel,24c02";
    reg = <0x55>;
    pagesize = <16>;
   };
  };

  /* J33 */
  i2c@2 {
   reg = <2>;
   #address-cells = <1>;
   #size-cells = <0>;
  };
 };
};

&pcie_phy {
 clocks = <&pcie0_refclk>;
 clock-names = "ref";
 fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
 fsl,clkreq-unsupported;
 status = "okay";
};

&pcie {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_pcie0>;
 reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
 status = "okay";

 pcie@0,0 {
  reg = <0x0000 0 0 0 0>;
  device_type = "pci";
  #address-cells = <3>;
  #size-cells = <2>;
  ranges;

  pcie@0,0 {
   reg = <0x0000 0 0 0 0>;
   device_type = "pci";
   #address-cells = <3>;
   #size-cells = <2>;
   ranges;

   pcie@7,0 {
    reg = <0x3800 0 0 0 0>;
    device_type = "pci";
    #address-cells = <3>;
    #size-cells = <2>;
    ranges;

    eth1: ethernet@0,0 {
     reg = <0x0000 0 0 0 0>;
     #address-cells = <3>;
     #size-cells = <2>;
     ranges;
     local-mac-address = [00 00 00 00 00 00];
    };
   };
  };
 };
};

/* GPS */
&uart1 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_uart1>;
 status = "okay";
};

/* RS232 */
&uart4 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_uart4>;
 status = "okay";
};

/* USB1 - FSA1 */
&usb3_0 {
 fsl,permanently-attached;
 fsl,disable-port-power-control;
 status = "okay";
};

&usb3_phy0 {
 status = "okay";
};

&usb_dwc3_0 {
 dr_mode = "host";
 status = "okay";
};

/* USB2 - USB3.0 Hub */
&usb3_1 {
 fsl,permanently-attached;
 fsl,disable-port-power-control;
 status = "okay";
};

&usb3_phy1 {
 vbus-supply = <®_usb2_vbus>;
 status = "okay";
};

&usb_dwc3_1 {
 dr_mode = "host";
 status = "okay";
};

/* SDIO 1.8V */
&usdhc1 {
 pinctrl-names = "default", "state_100mhz", "state_200mhz";
 pinctrl-0 = <&pinctrl_usdhc1>;
 pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
 pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 bus-width = <4>;
 non-removable;
 status = "okay";
};

/* microSD */
&usdhc2 {
 pinctrl-names = "default", "state_100mhz", "state_200mhz";
 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 cd-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; /* CD is active high */
 bus-width = <4>;
 vmmc-supply = <®_usdhc2_vmmc>;
 status = "okay";
};

&iomuxc {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_hog>;

 pinctrl_hog: hoggrp {
  fsl,pins = <
   MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08 0x40000146 /* DIO1 */
   MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11 0x40000146 /* DIO0 */
   MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x40000106 /* RS485_HALF */
   MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x40000106 /* RS485_EN */
   MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23 0x40000106 /* RS485_TERM */
  >;
 };

 pinctrl_accel: accelgrp {
  fsl,pins = <
   MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x150 /* IRQ# */
  >;
 };

 pinctrl_can1: can1grp {
  fsl,pins = <
   MX8MP_IOMUXC_SPDIF_TX__CAN1_TX  0x154
   MX8MP_IOMUXC_SPDIF_RX__CAN1_RX  0x154
  >;
 };

 pinctrl_can2: can2grp {
  fsl,pins = <
   MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX  0x154
   MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX  0x154
  >;
 };

 pinctrl_gpio_leds: gpioledgrp {
  fsl,pins = <
   MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x6 /* LEDG */
   MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05 0x6 /* LEDR */
  >;
 };

 pinctrl_fsa1i2c: fsa1i2cgrp {
  fsl,pins = <
   MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14 0x1d0  /* FSA1_ALERT# */
   MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x400001d0 /* FSA1_GPIO1 */
   MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09 0x400001d0 /* FSA1_GPIO2 */
  >;
 };

 pinctrl_fsa2i2c: fsa2i2cgrp {
  fsl,pins = <
   MX8MP_IOMUXC_SAI1_RXD2__GPIO4_IO04 0x1d0  /* FSA2_ALERT# */
   MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x400001d0 /* FSA2_GPIO1 */
   MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x400001d0 /* FSA2_GPIO2 */
  >;
 };

 pinctrl_mag: maggrp {
  fsl,pins = <
   MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x140 /* IRQ# */
  >;
 };

 pinctrl_pcie0: pcie0grp {
  fsl,pins = <
   MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x106 /* PERST# */
  >;
 };

 pinctrl_pps: ppsgrp {
  fsl,pins = <
   MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x146
  >;
 };

 pinctrl_reg_usb2_en: regusb2grp {
  fsl,pins = <
   MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12 0x146 /* USBHUB_RST# */
  >;
 };

 pinctrl_spi2: spi2grp {
  fsl,pins = <
   MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0xd0
   MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0xd0
   MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0xd0
   MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140 /* J32_CS */
   MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10 0x140 /* TPM_CS */
   MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x140 /* FSA1_CS */
   MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x140 /* FSA2_CS */
  >;
 };

 pinctrl_uart1: uart1grp {
  fsl,pins = <
   MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140
   MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140
  >;
 };

 pinctrl_uart4: uart4grp {
  fsl,pins = <
   MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140
   MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140
  >;
 };

 pinctrl_usdhc1: usdhc1grp {
  fsl,pins = <
   MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190
   MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0
   MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0
   MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0
   MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0
   MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0
  >;
 };

 pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
  fsl,pins = <
   MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194
   MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4
   MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4
   MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4
   MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4
   MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4
  >;
 };

 pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
  fsl,pins = <
   MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196
   MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6
   MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6
   MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6
   MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6
   MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6
  >;
 };

 pinctrl_usdhc2: usdhc2grp {
  fsl,pins = <
   MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
   MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
   MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
   MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
   MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
   MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
   MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
  >;
 };

 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
  fsl,pins = <
   MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
   MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
   MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
   MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
   MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
   MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
   MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
  >;
 };

 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
  fsl,pins = <
   MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
   MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
   MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
   MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
   MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
   MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
   MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
  >;
 };

 pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
  fsl,pins = <
   MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x1d0
  >;
 };

 pinctrl_usdhc2_gpio: usdhc2gpiogrp {
  fsl,pins = <
   MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
  >;
 };
};

[ Dauer der Verarbeitung: 0.3 Sekunden  (vorverarbeitet)  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge