Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  imx8mm-venice-gw7904.dts   Sprache: unbekannt

 
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright 2022 Gateworks Corporation
 */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/phy/phy-imx8-pcie.h>

#include "imx8mm.dtsi"

/ {
 model = "Gateworks Venice GW7904 i.MX8MM board";
 compatible = "gateworks,imx8mm-gw7904", "fsl,imx8mm";

 aliases {
  rtc0 = &gsc_rtc;
  rtc1 = &snvs_rtc;
 };

 chosen {
  stdout-path = &uart2;
 };

 memory@40000000 {
  device_type = "memory";
  reg = <0x0 0x40000000 0 0x80000000>;
 };

 gpio-keys {
  compatible = "gpio-keys";

  key-0 {
   label = "user_pb";
   gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
   linux,code = <BTN_0>;
  };

  key-1 {
   label = "user_pb1x";
   linux,code = <BTN_1>;
   interrupt-parent = <&gsc>;
   interrupts = <0>;
  };

  key-2 {
   label = "key_erased";
   linux,code = <BTN_2>;
   interrupt-parent = <&gsc>;
   interrupts = <1>;
  };

  key-3 {
   label = "eeprom_wp";
   linux,code = <BTN_3>;
   interrupt-parent = <&gsc>;
   interrupts = <2>;
  };

  key-4 {
   label = "switch_hold";
   linux,code = <BTN_5>;
   interrupt-parent = <&gsc>;
   interrupts = <7>;
  };
 };

 led-controller {
  compatible = "gpio-leds";
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_gpio_leds>;

  led-0 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_GREEN>;
   label = "led01_grn";
   gpios = <&gpioled 0 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-1 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_YELLOW>;
   label = "led01_yel";
   gpios = <&gpioled 1 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-2 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_GREEN>;
   label = "led02_grn";
   gpios = <&gpioled 2 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-3 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_YELLOW>;
   label = "led02_yel";
   gpios = <&gpioled 3 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-4 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_GREEN>;
   label = "led03_grn";
   gpios = <&gpioled 4 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-5 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_YELLOW>;
   label = "led03_yel";
   gpios = <&gpioled 5 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-6 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_GREEN>;
   label = "led04_grn";
   gpios = <&gpioled 6 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-7 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_YELLOW>;
   label = "led04_yel";
   gpios = <&gpioled 7 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-8 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_GREEN>;
   label = "led05_grn";
   gpios = <&gpioled 8 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-9 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_YELLOW>;
   label = "led05_yel";
   gpios = <&gpioled 9 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-10 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_GREEN>;
   label = "led06_grn";
   gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-11 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_RED>;
   label = "led06_red";
   gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-12 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_GREEN>;
   label = "led07_grn";
   gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-13 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_RED>;
   label = "led07_red";
   gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-14 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_GREEN>;
   label = "led08_grn";
   gpios = <&gpioled 10 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-15 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_YELLOW>;
   label = "led08_yel";
   gpios = <&gpioled 11 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-16 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_GREEN>;
   label = "led09_grn";
   gpios = <&gpioled 12 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-17 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_YELLOW>;
   label = "led09_yel";
   gpios = <&gpioled 13 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-18 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_GREEN>;
   label = "led10_grn";
   gpios = <&gpioled 14 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };

  led-19 {
   function = LED_FUNCTION_STATUS;
   color = <LED_COLOR_ID_YELLOW>;
   label = "led10_yel";
   gpios = <&gpioled 15 GPIO_ACTIVE_LOW>;
   default-state = "off";
  };
 };

 pcie0_refclk: pcie0-refclk {
  compatible = "fixed-clock";
  #clock-cells = <0>;
  clock-frequency = <100000000>;
 };

 reg_3p3v: regulator-3p3v {
  compatible = "regulator-fixed";
  regulator-name = "3P3V";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  regulator-always-on;
 };
};

&A53_0 {
 cpu-supply = <&buck2>;
};

&A53_1 {
 cpu-supply = <&buck2>;
};

&A53_2 {
 cpu-supply = <&buck2>;
};

&A53_3 {
 cpu-supply = <&buck2>;
};

&ddrc {
 operating-points-v2 = <&ddrc_opp_table>;

 ddrc_opp_table: opp-table {
  compatible = "operating-points-v2";

  opp-25000000 {
   opp-hz = /bits/ 64 <25000000>;
  };

  opp-100000000 {
   opp-hz = /bits/ 64 <100000000>;
  };

  opp-750000000 {
   opp-hz = /bits/ 64 <750000000>;
  };
 };
};

&fec1 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_fec1>;
 phy-mode = "rgmii-id";
 phy-handle = <ðphy0>;
 local-mac-address = [00 00 00 00 00 00];
 status = "okay";

 mdio {
  #address-cells = <1>;
  #size-cells = <0>;

  ethphy0: ethernet-phy@0 {
   compatible = "ethernet-phy-ieee802.3-c22";
   reg = <0>;
  };
 };
};

&gpio1 {
 gpio-line-names = "", "", "", "", "", "", "", "",
  "", "", "", "", "rs232_en#", "", "", "",
  "", "", "", "", "", "", "", "",
  "", "", "", "", "", "", "", "";
};

&gpio5 {
 gpio-line-names = "", "", "", "", "", "", "", "",
  "", "", "", "", "pci_wdis#", "", "", "",
  "", "", "", "", "", "", "", "",
  "", "", "", "", "", "", "", "";
};

&i2c1 {
 clock-frequency = <100000>;
 pinctrl-names = "default", "gpio";
 pinctrl-0 = <&pinctrl_i2c1>;
 pinctrl-1 = <&pinctrl_i2c1_gpio>;
 scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 status = "okay";

 gsc: gsc@20 {
  compatible = "gw,gsc";
  reg = <0x20>;
  pinctrl-0 = <&pinctrl_gsc>;
  interrupt-parent = <&gpio4>;
  interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
  interrupt-controller;
  #interrupt-cells = <1>;
  #address-cells = <1>;
  #size-cells = <0>;

  adc {
   compatible = "gw,gsc-adc";
   #address-cells = <1>;
   #size-cells = <0>;

   channel@6 {
    gw,mode = <0>;
    reg = <0x06>;
    label = "temp";
   };

   channel@82 {
    gw,mode = <2>;
    reg = <0x82>;
    label = "vin";
    gw,voltage-divider-ohms = <22100 1000>;
    gw,voltage-offset-microvolt = <700000>;
   };

   channel@84 {
    gw,mode = <2>;
    reg = <0x84>;
    label = "vdd_5p0";
    gw,voltage-divider-ohms = <10000 10000>;
   };

   channel@86 {
    gw,mode = <2>;
    reg = <0x86>;
    label = "vdd_3p3";
    gw,voltage-divider-ohms = <10000 10000>;
   };

   channel@88 {
    gw,mode = <2>;
    reg = <0x88>;
    label = "vdd_0p9";
   };

   channel@8c {
    gw,mode = <2>;
    reg = <0x8c>;
    label = "vdd_soc";
   };

   channel@8e {
    gw,mode = <2>;
    reg = <0x8e>;
    label = "vdd_arm";
   };

   channel@90 {
    gw,mode = <2>;
    reg = <0x90>;
    label = "vdd_1p8";
   };

   channel@92 {
    gw,mode = <2>;
    reg = <0x92>;
    label = "vdd_dram";
   };

   channel@a2 {
    gw,mode = <2>;
    reg = <0xa2>;
    label = "vdd_gsc";
    gw,voltage-divider-ohms = <10000 10000>;
   };
  };
 };

 gpio: gpio@23 {
  compatible = "nxp,pca9555";
  reg = <0x23>;
  gpio-controller;
  #gpio-cells = <2>;
  interrupt-parent = <&gsc>;
  interrupts = <4>;
 };

 eeprom@50 {
  compatible = "atmel,24c02";
  reg = <0x50>;
  pagesize = <16>;
 };

 eeprom@51 {
  compatible = "atmel,24c02";
  reg = <0x51>;
  pagesize = <16>;
 };

 eeprom@52 {
  compatible = "atmel,24c02";
  reg = <0x52>;
  pagesize = <16>;
 };

 eeprom@53 {
  compatible = "atmel,24c02";
  reg = <0x53>;
  pagesize = <16>;
 };

 gsc_rtc: rtc@68 {
  compatible = "dallas,ds1672";
  reg = <0x68>;
 };
};

&i2c2 {
 clock-frequency = <400000>;
 pinctrl-names = "default", "gpio";
 pinctrl-0 = <&pinctrl_i2c2>;
 pinctrl-1 = <&pinctrl_i2c2_gpio>;
 scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 status = "okay";

 pmic@4b {
  compatible = "rohm,bd71847";
  reg = <0x4b>;
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_pmic>;
  interrupt-parent = <&gpio3>;
  interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
  rohm,reset-snvs-powered;
  #clock-cells = <0>;
  clocks = <&osc_32k>;
  clock-output-names = "clk-32k-out";

  regulators {
   /* vdd_soc: 0.805-0.900V (typ=0.8V) */
   BUCK1 {
    regulator-name = "buck1";
    regulator-min-microvolt = <700000>;
    regulator-max-microvolt = <1300000>;
    regulator-boot-on;
    regulator-always-on;
    regulator-ramp-delay = <1250>;
   };

   /* vdd_arm: 0.805-1.0V (typ=0.9V) */
   buck2: BUCK2 {
    regulator-name = "buck2";
    regulator-min-microvolt = <700000>;
    regulator-max-microvolt = <1300000>;
    regulator-boot-on;
    regulator-always-on;
    regulator-ramp-delay = <1250>;
    rohm,dvs-run-voltage = <1000000>;
    rohm,dvs-idle-voltage = <900000>;
   };

   /* vdd_0p9: 0.805-1.0V (typ=0.9V) */
   BUCK3 {
    regulator-name = "buck3";
    regulator-min-microvolt = <700000>;
    regulator-max-microvolt = <1350000>;
    regulator-boot-on;
    regulator-always-on;
   };

   /* vdd_3p3 */
   BUCK4 {
    regulator-name = "buck4";
    regulator-min-microvolt = <3000000>;
    regulator-max-microvolt = <3300000>;
    regulator-boot-on;
    regulator-always-on;
   };

   /* vdd_1p8 */
   BUCK5 {
    regulator-name = "buck5";
    regulator-min-microvolt = <1605000>;
    regulator-max-microvolt = <1995000>;
    regulator-boot-on;
    regulator-always-on;
   };

   /* vdd_dram */
   BUCK6 {
    regulator-name = "buck6";
    regulator-min-microvolt = <800000>;
    regulator-max-microvolt = <1400000>;
    regulator-boot-on;
    regulator-always-on;
   };

   /* nvcc_snvs_1p8 */
   LDO1 {
    regulator-name = "ldo1";
    regulator-min-microvolt = <1600000>;
    regulator-max-microvolt = <1900000>;
    regulator-boot-on;
    regulator-always-on;
   };

   /* vdd_snvs_0p8 */
   LDO2 {
    regulator-name = "ldo2";
    regulator-min-microvolt = <800000>;
    regulator-max-microvolt = <900000>;
    regulator-boot-on;
    regulator-always-on;
   };

   /* vdda_1p8 */
   LDO3 {
    regulator-name = "ldo3";
    regulator-min-microvolt = <1800000>;
    regulator-max-microvolt = <3300000>;
    regulator-boot-on;
    regulator-always-on;
   };

   LDO4 {
    regulator-name = "ldo4";
    regulator-min-microvolt = <900000>;
    regulator-max-microvolt = <1800000>;
    regulator-boot-on;
    regulator-always-on;
   };

   LDO6 {
    regulator-name = "ldo6";
    regulator-min-microvolt = <900000>;
    regulator-max-microvolt = <1800000>;
    regulator-boot-on;
    regulator-always-on;
   };
  };
 };
};

&i2c3 {
 clock-frequency = <400000>;
 pinctrl-names = "default", "gpio";
 pinctrl-0 = <&pinctrl_i2c3>;
 pinctrl-1 = <&pinctrl_i2c3_gpio>;
 scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 status = "okay";

 accelerometer@19 {
  pinctrl-names = "default";
  pinctrl-0 = <&pinctrl_accel>;
  compatible = "st,lis2de12";
  reg = <0x19>;
  st,drdy-int-pin = <1>;
  interrupt-parent = <&gpio1>;
  interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
 };
};

&i2c4 {
 clock-frequency = <400000>;
 pinctrl-names = "default", "gpio";
 pinctrl-0 = <&pinctrl_i2c4>;
 pinctrl-1 = <&pinctrl_i2c4_gpio>;
 scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 status = "okay";

 gpioled: gpio@27 {
  compatible = "nxp,pca9555";
  reg = <0x27>;
  gpio-controller;
  #gpio-cells = <2>;
 };
};

&pcie_phy {
 fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
 fsl,clkreq-unsupported;
 clocks = <&pcie0_refclk>;
 clock-names = "ref";
 status = "okay";
};

&pcie0 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_pcie0>;
 reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;
 clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
   <&clk IMX8MM_CLK_PCIE1_AUX>;
 assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
     <&clk IMX8MM_CLK_PCIE1_CTRL>;
 assigned-clock-rates = <10000000>, <250000000>;
 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
     <&clk IMX8MM_SYS_PLL2_250M>;
 status = "okay";
};

&disp_blk_ctrl {
 status = "disabled";
};

&pgc_mipi {
 status = "disabled";
};

/* off-board RS232 */
&uart1 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_uart1>;
 cts-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
 rts-gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
 status = "okay";
};

/* console */
&uart2 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_uart2>;
 status = "okay";
};

&usbotg1 {
 dr_mode = "host";
 disable-over-current;
 status = "okay";
};

/* microSD */
&usdhc2 {
 pinctrl-names = "default", "state_100mhz", "state_200mhz";
 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 bus-width = <4>;
 vmmc-supply = <®_3p3v>;
 status = "okay";
};

/* eMMC */
&usdhc3 {
 pinctrl-names = "default", "state_100mhz", "state_200mhz";
 pinctrl-0 = <&pinctrl_usdhc3>;
 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 assigned-clocks = <&clk IMX8MM_CLK_USDHC3>;
 assigned-clock-rates = <400000000>;
 bus-width = <8>;
 non-removable;
 status = "okay";
};

&wdog1 {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_wdog>;
 fsl,ext-reset-output;
 status = "okay";
};

&iomuxc {
 pinctrl-names = "default";
 pinctrl-0 = <&pinctrl_hog>;

 pinctrl_hog: hoggrp {
  fsl,pins = <
   MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x40000041 /* RS232# */
   MX8MM_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x40000041 /* PCI_WDIS# */
  >;
 };

 pinctrl_accel: accelgrp {
  fsl,pins = <
   MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x159
  >;
 };

 pinctrl_fec1: fec1grp {
  fsl,pins = <
   MX8MM_IOMUXC_ENET_MDC_ENET1_MDC   0x3
   MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO  0x3
   MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3  0x1f
   MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2  0x1f
   MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1  0x1f
   MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0  0x1f
   MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3  0x91
   MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2  0x91
   MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1  0x91
   MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0  0x91
   MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC  0x1f
   MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC  0x91
   MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
   MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
   MX8MM_IOMUXC_SAI2_TXFS_GPIO4_IO24  0x19 /* IRQ# */
   MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25  0x19 /* RST# */
  >;
 };

 pinctrl_gpio_leds: gpioledsgrp {
  fsl,pins = <
   MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x40000019
   MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x40000019
   MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x40000019
   MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x40000019
  >;
 };

 pinctrl_gsc: gscgrp {
  fsl,pins = <
   MX8MM_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x159
  >;
 };

 pinctrl_i2c1: i2c1grp {
  fsl,pins = <
   MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL  0x400001c3
   MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA  0x400001c3
  >;
 };

 pinctrl_i2c1_gpio: i2c1gpiogrp {
  fsl,pins = <
   MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14 0x400001c3
   MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15 0x400001c3
  >;
 };

 pinctrl_i2c2: i2c2grp {
  fsl,pins = <
   MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL  0x400001c3
   MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA  0x400001c3
  >;
 };

 pinctrl_i2c2_gpio: i2c2gpiogrp {
  fsl,pins = <
   MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x400001c3
   MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x400001c3
  >;
 };

 pinctrl_i2c3: i2c3grp {
  fsl,pins = <
   MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL  0x400001c3
   MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA  0x400001c3
  >;
 };

 pinctrl_i2c3_gpio: i2c3gpiogrp {
  fsl,pins = <
   MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x400001c3
   MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x400001c3
  >;
 };

 pinctrl_i2c4: i2c4grp {
  fsl,pins = <
   MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL  0x400001c3
   MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA  0x400001c3
  >;
 };

 pinctrl_i2c4_gpio: i2c4gpiogrp {
  fsl,pins = <
   MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x400001c3
   MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x400001c3
  >;
 };

 pinctrl_pcie0: pciegrp {
  fsl,pins = <
   MX8MM_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x41
  >;
 };

 pinctrl_pmic: pmicgrp {
  fsl,pins = <
   MX8MM_IOMUXC_NAND_DATA02_GPIO3_IO8 0x41
  >;
 };

 pinctrl_uart1: uart1grp {
  fsl,pins = <
   MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
   MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
   MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26 0x140 /* CTS# in */
   MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27 0x140 /* RTS# out */
  >;
 };

 pinctrl_uart2: uart2grp {
  fsl,pins = <
   MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
   MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
  >;
 };

 pinctrl_usdhc2: usdhc2grp {
  fsl,pins = <
   MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK  0x190
   MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD  0x1d0
   MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
   MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
   MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
   MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
  >;
 };

 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
  fsl,pins = <
   MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK  0x194
   MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD  0x1d4
   MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
   MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
   MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
   MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
  >;
 };

 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
  fsl,pins = <
   MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK  0x196
   MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD  0x1d6
   MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
   MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
   MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
   MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
  >;
 };

 pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
  fsl,pins = <
   MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4
   MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT  0x1d0
  >;
 };

 pinctrl_usdhc3: usdhc3grp {
  fsl,pins = <
   MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
   MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
   MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
   MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
   MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
   MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
   MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
   MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
   MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
   MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
   MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
  >;
 };

 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
  fsl,pins = <
   MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194
   MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
   MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
   MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
   MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
   MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
   MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
   MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
   MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
   MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
   MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
  >;
 };

 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
  fsl,pins = <
   MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196
   MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
   MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
   MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
   MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
   MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
   MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
   MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
   MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
   MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
   MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
  >;
 };

 pinctrl_wdog: wdoggrp {
  fsl,pins = <
   MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
  >;
 };
};

[ Dauer der Verarbeitung: 0.16 Sekunden  (vorverarbeitet)  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge