// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2010 - 2011 Calxeda , Inc .
* Copyright 2012 Pavel Machek < pavel @ denx . de >
* Based on platsmp . c , Copyright ( C ) 2002 ARM Ltd .
* Copyright ( C ) 2012 Altera Corporation
*/
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <asm /cacheflush.h>
#include <asm /smp_scu.h>
#include <asm /smp_plat.h>
#include "core.h"
static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
int trampoline_size = secondary_trampoline_end - secondary_trampoline;
if (socfpga_cpu1start_addr) {
/* This will put CPU #1 into reset. */
writel(RSTMGR_MPUMODRST_CPU1,
rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
memcpy(phys_to_virt(0 ), secondary_trampoline, trampoline_size);
writel(__pa_symbol(secondary_startup),
sys_manager_base_addr + (socfpga_cpu1start_addr & 0 x000000ff));
flush_cache_all();
smp_wmb();
outer_clean_range(0 , trampoline_size);
/* This will release CPU #1 out of reset. */
writel(0 , rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
}
return 0 ;
}
static int socfpga_a10_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
int trampoline_size = secondary_trampoline_end - secondary_trampoline;
if (socfpga_cpu1start_addr) {
writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr +
SOCFPGA_A10_RSTMGR_MODMPURST);
memcpy(phys_to_virt(0 ), secondary_trampoline, trampoline_size);
writel(__pa_symbol(secondary_startup),
sys_manager_base_addr + (socfpga_cpu1start_addr & 0 x00000fff));
flush_cache_all();
smp_wmb();
outer_clean_range(0 , trampoline_size);
/* This will release CPU #1 out of reset. */
writel(0 , rst_manager_base_addr + SOCFPGA_A10_RSTMGR_MODMPURST);
}
return 0 ;
}
static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus)
{
struct device_node *np;
void __iomem *socfpga_scu_base_addr;
np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu" );
if (!np) {
pr_err("%s: missing scu\n" , __func__);
return ;
}
socfpga_scu_base_addr = of_iomap(np, 0 );
if (!socfpga_scu_base_addr)
return ;
scu_enable(socfpga_scu_base_addr);
}
#ifdef CONFIG_HOTPLUG_CPU
/*
* platform - specific code to shutdown a CPU
*
* Called with IRQs disabled
*/
static void socfpga_cpu_die(unsigned int cpu)
{
/* Do WFI. If we wake up early, go back into WFI */
while (1 )
cpu_do_idle();
}
/*
* We need a dummy function so that platform_can_cpu_hotplug ( ) knows
* we support CPU hotplug . However , the function does not need to do
* anything , because CPUs going offline just do WFI . We could reset
* the CPUs but it would increase power consumption .
*/
static int socfpga_cpu_kill(unsigned int cpu)
{
return 1 ;
}
#endif
static const struct smp_operations socfpga_smp_ops __initconst = {
.smp_prepare_cpus = socfpga_smp_prepare_cpus,
.smp_boot_secondary = socfpga_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = socfpga_cpu_die,
.cpu_kill = socfpga_cpu_kill,
#endif
};
static const struct smp_operations socfpga_a10_smp_ops __initconst = {
.smp_prepare_cpus = socfpga_smp_prepare_cpus,
.smp_boot_secondary = socfpga_a10_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = socfpga_cpu_die,
.cpu_kill = socfpga_cpu_kill,
#endif
};
CPU_METHOD_OF_DECLARE(socfpga_smp, "altr,socfpga-smp" , &socfpga_smp_ops);
CPU_METHOD_OF_DECLARE(socfpga_a10_smp, "altr,socfpga-a10-smp" , &socfpga_a10_smp_ops);
Messung V0.5 in Prozent C=94 H=83 G=88
¤ Dauer der Verarbeitung: 0.10 Sekunden
(vorverarbeitet am 2026-09-28)
¤
*© Formatika GbR, Deutschland