/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright 2008 Simtec Electronics
* http : //armlinux.simtec.co.uk/
* Ben Dooks < ben @ simtec . co . uk >
*
* S3C Platform - GPIO core
*/
#ifndef __PLAT_SAMSUNG_GPIO_CORE_H
#define __PLAT_SAMSUNG_GPIO_CORE_H
/* Bring in machine-local definitions, especially S3C_GPIO_END */
#include "gpio-samsung.h"
#include <linux/gpio/driver.h>
#define GPIOCON_OFF (0 x00)
#define GPIODAT_OFF (0 x04)
#define con_4bit_shift(__off) ((__off) * 4 )
/* Define the core gpiolib support functions that the s3c platforms may
* need to extend or change depending on the hardware and the s3c chip
* selected at build or found at run time .
*
* These definitions are not intended for driver inclusion , there is
* nothing here that should not live outside the platform and core
* specific code .
*/
struct samsung_gpio_chip;
/**
* struct samsung_gpio_pm - power management ( suspend / resume ) information
* @ save : Routine to save the state of the GPIO block
* @ resume : Routine to resume the GPIO block .
*/
struct samsung_gpio_pm {
void (*save)(struct samsung_gpio_chip *chip);
void (*resume)(struct samsung_gpio_chip *chip);
};
struct samsung_gpio_cfg;
/**
* struct samsung_gpio_chip - wrapper for specific implementation of gpio
* @ chip : The chip structure to be exported via gpiolib .
* @ base : The base pointer to the gpio configuration registers .
* @ group : The group register number for gpio interrupt support .
* @ irq_base : The base irq number .
* @ config : special function and pull - resistor control information .
* @ lock : Lock for exclusive access to this gpio bank .
* @ pm_save : Save information for suspend / resume support .
* @ bitmap_gpio_int : Bitmap for representing GPIO interrupt or not .
*
* This wrapper provides the necessary information for the Samsung
* specific gpios being registered with gpiolib .
*
* The lock protects each gpio bank from multiple access of the shared
* configuration registers , or from reading of data whilst another thread
* is writing to the register set .
*
* Each chip has its own lock to avoid any contention between different
* CPU cores trying to get one lock for different GPIO banks , where each
* bank of GPIO has its own register space and configuration registers .
*/
struct samsung_gpio_chip {
struct gpio_chip chip;
struct samsung_gpio_cfg *config;
struct samsung_gpio_pm *pm;
void __iomem *base;
int irq_base;
int group;
spinlock_t lock;
#ifdef CONFIG_PM
u32 pm_save[4 ];
#endif
u32 bitmap_gpio_int;
};
static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc)
{
return container_of(gpc, struct samsung_gpio_chip, chip);
}
/**
* samsung_gpiolib_to_irq - convert gpio pin to irq number
* @ chip : The gpio chip that the pin belongs to .
* @ offset : The offset of the pin in the chip .
*
* This helper returns the irq number calculated from the chip - > irq_base and
* the provided offset .
*/
extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
#ifdef CONFIG_S3C_GPIO_TRACK
extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END];
static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int chip)
{
return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
}
#else
/* machine specific code should provide samsung_gpiolib_getchip */
extern struct samsung_gpio_chip s3c24xx_gpios[];
static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
{
struct samsung_gpio_chip *chip;
if (pin > S3C_GPIO_END)
return NULL;
chip = &s3c24xx_gpios[pin/32 ];
return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL;
}
static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { }
#endif
#ifdef CONFIG_PM
extern struct samsung_gpio_pm samsung_gpio_pm_1bit;
extern struct samsung_gpio_pm samsung_gpio_pm_2bit;
extern struct samsung_gpio_pm samsung_gpio_pm_4bit;
#define __gpio_pm(x) x
#else
#define samsung_gpio_pm_1bit NULL
#define samsung_gpio_pm_2bit NULL
#define samsung_gpio_pm_4bit NULL
#define __gpio_pm(x) NULL
#endif /* CONFIG_PM */
/* locking wrappers to deal with multiple access to the same gpio bank */
#define samsung_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl)
#define samsung_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl)
#endif /* __PLAT_SAMSUNG_GPIO_CORE_H */
Messung V0.5 in Prozent C=96 H=95 G=95
¤ Dauer der Verarbeitung: 0.29 Sekunden
(vorverarbeitet am 2026-09-27)
¤
*© Formatika GbR, Deutschland