Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  omap5-uevm.dts   Sprache: unbekannt

 
// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
 */
/dts-v1/;

#include "omap5-board-common.dtsi"

/ {
 model = "TI OMAP5 uEVM board";
 compatible = "ti,omap5-uevm", "ti,omap5";

 memory@80000000 {
  device_type = "memory";
  reg = <0 0x80000000 0 0x7f000000>; /* 2032 MB */
 };

 reserved-memory {
  #address-cells = <2>;
  #size-cells = <2>;
  ranges;

  dsp_memory_region: dsp-memory@95000000 {
   compatible = "shared-dma-pool";
   reg = <0 0x95000000 0 0x800000>;
   reusable;
   status = "okay";
  };

  ipu_memory_region: ipu-memory@95800000 {
   compatible = "shared-dma-pool";
   reg = <0 0x95800000 0 0x3800000>;
   reusable;
   status = "okay";
  };
 };

 aliases {
  ethernet = ðernet;
 };

 leds {
  compatible = "gpio-leds";
  led1 {
   label = "omap5:blue:usr1";
   gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */
   linux,default-trigger = "heartbeat";
   default-state = "off";
  };
 };

 evm_keys {
  compatible = "gpio-keys";

  pinctrl-names = "default";
  pinctrl-0 = <&evm_keys_pins>;

  #address-cells = <7>;
  #size-cells = <0>;

  btn1 {
   label = "BTN1";
   linux,code = <169>;
   gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 */
   wakeup-source;
   autorepeat;
   debounce-interval = <50>;
  };
 };

 evm_leds {
  compatible = "gpio-leds";

  led1 {
   label = "omap5:red:led";
   gpios = <&gpio9 17 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "mmc0";
   default-state = "off";
  };

  led2 {
   label = "omap5:green:led";
   gpios = <&gpio9 18 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "mmc1";
   default-state = "off";
  };

  led3 {
   label = "omap5:blue:led";
   gpios = <&gpio9 19 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "mmc2";
   default-state = "off";
  };

  led4 {
   label = "omap5:green:led1";
   gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "heartbeat";
   default-state = "off";
  };

  led5 {
   label = "omap5:green:led2";
   gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "default-on";
   default-state = "off";
  };

  led6 {
   label = "omap5:green:led3";
   gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "heartbeat";
   default-state = "off";
  };

  led7 {
   label = "omap5:green:led4";
   gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "default-on";
   default-state = "off";
  };

  led8 {
   label = "omap5:green:led5";
   gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>;
   linux,default-trigger = "heartbeat";
   default-state = "off";
  };
 };
};

&hdmi {
 vdda-supply = <&ldo4_reg>;
};

&i2c1 {
 eeprom@50 {
  compatible = "atmel,24c02";
  reg = <0x50>;
 };
};

&i2c5 {
 pinctrl-names = "default";
 pinctrl-0 = <&i2c5_pins>;

 clock-frequency = <400000>;

 gpio9: gpio@22 {
  compatible = "ti,tca6424";
  reg = <0x22>;
  gpio-controller;
  #gpio-cells = <2>;
 };
};

&mmc1 {
 pinctrl-names = "default";
 pinctrl-0 = <&mmc1_pins>;

 cd-gpios = <&gpio5 24 GPIO_ACTIVE_LOW>; /* gpio5_152 */
};

&omap5_pmx_core {
 evm_keys_pins: evm-keys-gpio-pins {
  pinctrl-single,pins = <
   OMAP5_IOPAD(0x0b6, PIN_INPUT | MUX_MODE6) /* gpio3_83 */
  >;
 };

 i2c5_pins: i2c5-pins {
  pinctrl-single,pins = <
   OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0)  /* i2c5_scl */
   OMAP5_IOPAD(0x1c8, PIN_INPUT | MUX_MODE0)  /* i2c5_sda */
  >;
 };

 mmc1_pins: mmc1-pins {
  pinctrl-single,pins = <
   OMAP5_IOPAD(0x1d4, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio5_152 */
  >;
 };
};

&tpd12s015 {
 gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */
  <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */
  <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
};

&twl6040 {
 ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;  /* gpio line 141 */
};

&twl6040_pins {
 pinctrl-single,pins = <
  OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */
 >;
};

&usbhsehci {
 #address-cells = <1>;
 #size-cells = <0>;

 hub@2 {
  compatible = "usb424,3503";
  reg = <2>;
  #address-cells = <1>;
  #size-cells = <0>;
 };

 ethernet: ethernet@3 {
  compatible = "usb424,9730";
  reg = <3>;
 };
};

&wlcore {
 compatible = "ti,wl1837";
};

&dsp {
 status = "okay";
 memory-region = <&dsp_memory_region>;
 ti,timers = <&timer5>;
 ti,watchdog-timers = <&timer6>;
};

&ipu {
 status = "okay";
 memory-region = <&ipu_memory_region>;
 ti,timers = <&timer3>;
 ti,watchdog-timers = <&timer9>, <&timer11>;
};

[ Dauer der Verarbeitung: 0.3 Sekunden  (vorverarbeitet)  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge