Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 

Benutzer

Quelle  keystone-k2hk-evm.dts   Sprache: unbekannt

 
Spracherkennung für: .dts vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]

// SPDX-License-Identifier: GPL-2.0
/*
 * Keystone 2 Kepler/Hawking EVM device tree
 *
 * Copyright (C) 2013-2017 Texas Instruments Incorporated - https://www.ti.com/
 */
/dts-v1/;

#include "keystone.dtsi"
#include "keystone-k2hk.dtsi"

/ {
 compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone";
 model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";

 reserved-memory {
  #address-cells = <2>;
  #size-cells = <2>;
  ranges;

  dsp_common_memory: dsp-common-memory@81f800000 {
   compatible = "shared-dma-pool";
   reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
   reusable;
   status = "okay";
  };
 };

 leds {
  compatible = "gpio-leds";
  led-debug-1-1 {
   label = "keystone:green:debug1";
   gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
  };

  led-debug-1-2 {
   label = "keystone:red:debug1";
   gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
  };

  led-debug-2 {
   label = "keystone:blue:debug2";
   gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
  };

  led-debug-3 {
   label = "keystone:blue:debug3";
   gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
  };
 };
};

&soc0 {
  clocks {
   refclksys: refclksys {
    #clock-cells = <0>;
    compatible = "fixed-clock";
    clock-frequency = <122880000>;
    clock-output-names = "refclk-sys";
   };

   refclkpass: refclkpass {
    #clock-cells = <0>;
    compatible = "fixed-clock";
    clock-frequency = <122880000>;
    clock-output-names = "refclk-pass";
   };

   refclkarm: refclkarm {
    #clock-cells = <0>;
    compatible = "fixed-clock";
    clock-frequency = <125000000>;
    clock-output-names = "refclk-arm";
   };

   refclkddr3a: refclkddr3a {
    #clock-cells = <0>;
    compatible = "fixed-clock";
    clock-frequency = <100000000>;
    clock-output-names = "refclk-ddr3a";
   };

   refclkddr3b: refclkddr3b {
    #clock-cells = <0>;
    compatible = "fixed-clock";
    clock-frequency = <100000000>;
    clock-output-names = "refclk-ddr3b";
   };
  };
};

&usb_phy {
 status = "okay";
};

&keystone_usb0 {
 status = "okay";
};

&usb0 {
 dr_mode = "host";
};

&aemif {
 cs0 {
  #address-cells = <2>;
  #size-cells = <1>;
  clock-ranges;
  ranges;

  ti,cs-chipselect = <0>;
  /* all timings in nanoseconds */
  ti,cs-min-turnaround-ns = <12>;
  ti,cs-read-hold-ns = <6>;
  ti,cs-read-strobe-ns = <23>;
  ti,cs-read-setup-ns = <9>;
  ti,cs-write-hold-ns = <8>;
  ti,cs-write-strobe-ns = <23>;
  ti,cs-write-setup-ns = <8>;

  nand@0,0 {
   compatible = "ti,keystone-nand","ti,davinci-nand";
   #address-cells = <1>;
   #size-cells = <1>;
   reg = <0 0 0x4000000
          1 0 0x0000100>;

   ti,davinci-chipselect = <0>;
   ti,davinci-mask-ale = <0x2000>;
   ti,davinci-mask-cle = <0x4000>;
   ti,davinci-mask-chipsel = <0>;
   nand-ecc-mode = "hw";
   ti,davinci-ecc-bits = <4>;
   nand-on-flash-bbt;

   partition@0 {
    label = "u-boot";
    reg = <0x0 0x100000>;
    read-only;
   };

   partition@100000 {
    label = "params";
    reg = <0x100000 0x80000>;
    read-only;
   };

   partition@180000 {
    label = "ubifs";
    reg = <0x180000 0x1fe80000>;
   };
  };
 };
};

&i2c0 {
 eeprom@50 {
  compatible = "atmel,24c1024";
  reg = <0x50>;
 };
};

&spi0 {
 nor_flash: flash@0 {
  #address-cells = <1>;
  #size-cells = <1>;
  compatible = "micron,n25q128a11", "jedec,spi-nor";
  spi-max-frequency = <54000000>;
  m25p,fast-read;
  reg = <0>;

  partition@0 {
   label = "u-boot-spl";
   reg = <0x0 0x80000>;
   read-only;
  };

  partition@1 {
   label = "misc";
   reg = <0x80000 0xf80000>;
  };
 };
};

&mdio {
 status = "okay";
 ethphy0: ethernet-phy@0 {
  compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
  reg = <0>;
 };

 ethphy1: ethernet-phy@1 {
  compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
  reg = <1>;
 };
};

&dsp0 {
 memory-region = <&dsp_common_memory>;
 status = "okay";
};

&dsp1 {
 memory-region = <&dsp_common_memory>;
 status = "okay";
};

&dsp2 {
 memory-region = <&dsp_common_memory>;
 status = "okay";
};

&dsp3 {
 memory-region = <&dsp_common_memory>;
 status = "okay";
};

&dsp4 {
 memory-region = <&dsp_common_memory>;
 status = "okay";
};

&dsp5 {
 memory-region = <&dsp_common_memory>;
 status = "okay";
};

&dsp6 {
 memory-region = <&dsp_common_memory>;
 status = "okay";
};

&dsp7 {
 memory-region = <&dsp_common_memory>;
 status = "okay";
};

[Dauer der Verarbeitung: 0.2 Sekunden, vorverarbeitet 2026-06-08]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge