// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2014 STMicroelectronics Limited.
* Author: Peter Griffin <peter.griffin@linaro.org>
*/
#include "stih418-clock.dtsi"
#include "stih407-family.dtsi"
#include "stih410-pinctrl.dtsi"
#include <dt-bindings/thermal/thermal.h>
/ {
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <2>;
/* u-boot puts hpen in SBC dmem at 0xa4 offset */
cpu-release-addr = <0x94100A4>;
#cooling-cells = <2>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <3>;
/* u-boot puts hpen in SBC dmem at 0xa4 offset */
cpu-release-addr = <0x94100A4>;
#cooling-cells = <2>;
};
};
usb2_picophy1: phy2 {
compatible = "st,stih407-usb2-phy";
#phy-cells = <0>;
st,syscfg = <&syscfg_core 0xf8 0xf4>;
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
<&picophyreset STIH407_PICOPHY0_RESET>;
reset-names = "global", "port";
};
usb2_picophy2: phy3 {
compatible = "st,stih407-usb2-phy";
#phy-cells = <0>;
st,syscfg = <&syscfg_core 0xfc 0xf4>;
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
<&picophyreset STIH407_PICOPHY1_RESET>;
reset-names = "global", "port";
};
thermal-zones {
cpu_thermal: cpu-thermal {
polling-delay-passive = <250>; /* 250ms */
polling-delay = <1000>; /* 1000ms */
thermal-sensors = <&thermal>;
trips {
cpu_crit: cpu-crit {
temperature = <95000>; /* 95C */
hysteresis = <2000>;
type = "critical";
};
cpu_alert: cpu-alert {
temperature = <85000>; /* 85C */
hysteresis = <2000>;
type = "passive";
};
};
cooling-maps {
map {
trip = <&cpu_alert>;
cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
soc {
rng11: rng@8a8a000 {
status = "disabled";
};
ohci0: usb@9a03c00 {
compatible = "st,st-ohci-300x";
reg = <0x9a03c00 0x100>;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
<&softreset STIH407_USB2_PORT0_SOFTRESET>;
reset-names = "power", "softreset";
phys = <&usb2_picophy1>;
phy-names = "usb";
};
ehci0: usb@9a03e00 {
compatible = "st,st-ehci-300x";
reg = <0x9a03e00 0x100>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
<&softreset STIH407_USB2_PORT0_SOFTRESET>;
reset-names = "power", "softreset";
phys = <&usb2_picophy1>;
phy-names = "usb";
};
ohci1: usb@9a83c00 {
compatible = "st,st-ohci-300x";
reg = <0x9a83c00 0x100>;
interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
<&softreset STIH407_USB2_PORT1_SOFTRESET>;
reset-names = "power", "softreset";
phys = <&usb2_picophy2>;
phy-names = "usb";
};
ehci1: usb@9a83e00 {
compatible = "st,st-ehci-300x";
reg = <0x9a83e00 0x100>;
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
<&softreset STIH407_USB2_PORT1_SOFTRESET>;
reset-names = "power", "softreset";
phys = <&usb2_picophy2>;
phy-names = "usb";
};
mmc0: sdhci@9060000 {
assigned-clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
assigned-clock-parents = <&clk_s_c0_pll1 0>;
assigned-clock-rates = <200000000>;
};
thermal: thermal@91a0000 {
compatible = "st,stih407-thermal";
reg = <0x91a0000 0x28>;
clock-names = "thermal";
clocks = <&clk_sysin>;
interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
#thermal-sensor-cells = <0>;
};
};
};
