Eine aufbereitete Darstellung der Quelle

 
     
 
 
Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 

Benutzer

Quelle  rv1109-relfor-saib.dts   Sprache: unbekannt

 
Spracherkennung für: .dts vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2024 Relfor Labs Pvt. Ltd.
 */


/dts-v1/;
#include "rv1109.dtsi"
#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/input.h>

/ {
 model = "Rockchip RV1109 Relfor Saib Board";
 compatible = "relfor,saib", "rockchip,rv1109";

 gpio-keys {
  compatible = "gpio-keys";

  button {
   gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_HIGH>;
   linux,code = <KEY_DATA>;
   label = "GPIO User Switch";
   linux,input-type = <1>;
  };
 };

 ir_receiver: ir-receiver {
  compatible = "gpio-ir-receiver";
  gpios = <&gpio3  RK_PB4 GPIO_ACTIVE_LOW>;
  pinctrl-names = "default";
  pinctrl-0 = <&ir_rx>;
 };

 ir_transmitter: ir-transmitter {
  compatible = "pwm-ir-tx";
  pwms = <&pwm11 0 10000000 1>;
 };

 led-controller {
  compatible = "pwm-leds-multicolor";

  multi-led {
   color = <LED_COLOR_ID_RGB>;
   function = LED_FUNCTION_INDICATOR;
   max-brightness = <65535>;

   led-0 {
    active-low;
    color = <LED_COLOR_ID_BLUE>;
    pwms = <&pwm9 0 50000 0>;
   };

   led-1 {
    active-low;
    color = <LED_COLOR_ID_GREEN>;
    pwms = <&pwm6 0 50000 0>;
   };

   led-2 {
    active-low;
    color = <LED_COLOR_ID_RED>;
    pwms = <&pwm10 0 50000 0>;
   };
  };
 };

 pwm-leds {
  compatible = "pwm-leds";

  led-0 {
   pwms = <&pwm2 0 50000 0>;
   max-brightness = <255>;
   linux,default-trigger = "none";
  };

  led-1 {
   pwms = <&pwm8 0 50000 0>;
   max-brightness = <0>;
   linux,default-trigger = "none";
  };

  led-2 {
   pwms = <&pwm5 0 50000 0>;
   max-brightness = <255>;
   linux,default-trigger = "none";
  };
 };

 sdio_pwrseq: pwrseq-sdio {
  compatible = "mmc-pwrseq-simple";
  clocks = <&rtc0>;
  clock-names = "ext_clock";
  pinctrl-names = "default";
  pinctrl-0 = <&wifi_enable_h>;
  reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
 };

 vcc_0v8: regulator-vcc-0v8 {
  compatible = "regulator-fixed";
  regulator-name = "vcc_0v8";
  regulator-min-microvolt = <800000>;
  regulator-max-microvolt = <800000>;
  regulator-always-on;
  regulator-boot-on;
  startup-delay-us = <150>;
  vin-supply = <&vcc5v0_sys>;
 };

 vcc_1v2_ddr: regulator-vcc-1v2-ddr {
  compatible = "regulator-fixed";
  regulator-name = "vcc_1v2_ddr";
  regulator-min-microvolt = <1200000>;
  regulator-max-microvolt = <1200000>;
  regulator-always-on;
  regulator-boot-on;
  startup-delay-us = <75000>;
  vin-supply = <&vcc5v0_sys>;
 };

 vcc_1v8: regulator-vcc-1v8 {
  compatible = "regulator-fixed";
  regulator-name = "vcc_1v8";
  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <1800000>;
  regulator-always-on;
  regulator-boot-on;
  startup-delay-us = <51000>;
  vin-supply = <&vcc5v0_sys>;
 };

 vcc1v8_ir: regulator-vcc1v8-ir {
  compatible = "regulator-fixed";
  regulator-name = "vcc1v8_ir";
  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <1800000>;
  regulator-always-on;
  regulator-boot-on;
  vin-supply = <&vcc5v0_sys>;
 };

 vcc_2v5_ddr: regulator-vcc-2v5-ddr {
  compatible = "regulator-fixed";
  regulator-name = "vcc_2v5_ddr";
  regulator-min-microvolt = <2500000>;
  regulator-max-microvolt = <2500000>;
  regulator-always-on;
  regulator-boot-on;
  vin-supply = <&vcc3v3_sys>;
 };

 vcc3v3_sys: regulator-vcc3v3-sys {
  compatible = "regulator-fixed";
  regulator-name = "vcc3v3_sys";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  regulator-always-on;
  regulator-boot-on;
  startup-delay-us = <75000>;
  vin-supply = <&vcc5v0_sys>;
 };

 vcc5v0_sys: regulator-vcc5v0-sys {
  compatible = "regulator-fixed";
  regulator-name = "vcc5v0_sys";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  regulator-always-on;
  regulator-boot-on;
 };

 vdd_arm: regulator-vdd-arm {
  compatible = "pwm-regulator";
  pwms = <&pwm0 0 5000 1>;
  regulator-name = "vdd_arm";
  regulator-min-microvolt = <720000>;
  regulator-max-microvolt = <1000000>;
  regulator-settling-time-up-us = <18000>;
  regulator-always-on;
  regulator-boot-on;
  pwm-supply = <&vcc3v3_sys>;
  vin-supply = <&vcc5v0_sys>;
 };

 vdd_npu_vepu: regulator-vdd-npu-vepu {
  compatible = "pwm-regulator";
  pwms = <&pwm1 0 5000 1>;
  regulator-name = "vdd_npu_vepu";
  regulator-min-microvolt = <650000>;
  regulator-max-microvolt = <950000>;
  regulator-settling-time-up-us = <18000>;
  regulator-always-on;
  regulator-boot-on;
  pwm-supply = <&vcc3v3_sys>;
  vin-supply = <&vcc5v0_sys>;
 };

 thermal_sensor1: thermal-sensor1 {
  compatible = "generic-adc-thermal";
  #thermal-sensor-cells = <0>;
  io-channels = <&saradc 1>;
  io-channel-names = "sensor-channel";
  temperature-lookup-table = <(-40000826
          85000 609>;
 };

 thermal_sensor2: thermal-sensor2 {
  compatible = "generic-adc-thermal";
  #thermal-sensor-cells = <0>;
  io-channels = <&saradc 2>;
  io-channel-names = "sensor-channel";
  temperature-lookup-table = <(-40000826
          85000 609>;
 };
};

&cpu0 {
 cpu-supply = <&vdd_arm>;
};

&cpu1 {
 cpu-supply = <&vdd_arm>;
};

&emmc {
 bus-width = <8>;
 non-removable;
 pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk>;
 pinctrl-names = "default";
 rockchip,default-sample-phase = <90>;
 vmmc-supply = <&vcc3v3_sys>;
 status = "okay";
};

&i2c3 {
 pinctrl-0 = <&i2c3m2_xfer>;
 pinctrl-names = "default";
 status = "okay";

 rtc0: rtc@52 {
  compatible = "microcrystal,rv3028";
  reg = <0x52>;
  #clock-cells = <0>;
  interrupt-parent = <&gpio2>;
  interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
  pinctrl-0 = <&rtc_int>;
  pinctrl-names = "default";
 };
};

&i2s0 {
 /delete-property/ pinctrl-0;
 rockchip,trcm-sync-rx-only;
 pinctrl-0 = <&i2s0m0_sclk_rx>,
      <&i2s0m0_lrck_rx>,
      <&i2s0m0_sdi0>;
 pinctrl-names = "default";
 status = "okay";
};

&pinctrl {
 bluetooth-pins {
  bt_reset: bt-reset {
   rockchip,pins =
   <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
  };
  bt_wake_dev: bt-wake-dev {
   rockchip,pins =
   <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
  };
  bt_wake_host: bt-wake-host {
   rockchip,pins =
   <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>;
  };
 };

 buttons {
  switch: switch {
   rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
  };
 };

 ir {
  ir_rx: ir-rx {
   rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };

 pwm {
  pwm0m0_pins_pull_up: pwm0m0-pins-pull-up {
   rockchip,pins =
   /* pwm0_pin_m0 */
   <0 RK_PB6 3 &pcfg_pull_up>;
  };
  pwm1m0_pins_pull_up: pwm1m0-pins-pull-up {
   rockchip,pins =
   /* pwm1_pin_m0 */
   <0 RK_PB7 3 &pcfg_pull_up>;
  };
 };

 rtc {
  rtc_int: rtc-int {
   rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
  };
 };

 sdio-pwrseq {
  wifi_enable_h: wifi-enable-h {
   rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
  };
 };
};

&pmu_io_domains {
 pmuio0-supply = <&vcc3v3_sys>;
 pmuio1-supply = <&vcc3v3_sys>;
 vccio4-supply = <&vcc3v3_sys>;
 vccio5-supply = <&vcc3v3_sys>;
 vccio6-supply = <&vcc3v3_sys>;
 vccio7-supply = <&vcc3v3_sys>;
 status = "okay";
};

&pwm0 {
 /delete-property/ pinctrl-0;
 pinctrl-0 = <&pwm0m0_pins_pull_up>;
 pinctrl-names = "default";
 status = "okay";
};

&pwm1 {
 /delete-property/ pinctrl-0;
 pinctrl-0 = <&pwm1m0_pins_pull_up>;
 pinctrl-names = "default";
 status = "okay";
};

&pwm2 {
 /delete-property/ pinctrl-0;
 pinctrl-0 = <&pwm2m1_pins>;
 pinctrl-names = "default";
 status = "okay";
};

&pwm5 {
 pinctrl-0 = <&pwm5m0_pins>;
 pinctrl-names = "default";
 status = "okay";
};

&pwm6 {
 pinctrl-0 = <&pwm6m0_pins>;
 pinctrl-names = "default";
 status = "okay";
};

&pwm8 {
 pinctrl-0 = <&pwm8m1_pins>;
 pinctrl-names = "default";
 status = "okay";
};

&pwm9 {
 pinctrl-0 = <&pwm9m1_pins>;
 pinctrl-names = "default";
 status = "okay";
};

&pwm10 {
 pinctrl-0 = <&pwm10m1_pins>;
 pinctrl-names = "default";
 status = "okay";
};

&pwm11 {
 /delete-property/ pinctrl-0;
 pinctrl-0 = <&pwm11m1_pins>;
 pinctrl-names = "default";
 status = "okay";
};

&saradc {
 vref-supply = <&vcc_1v8>;
 status = "okay";
};

&sdio {
 bus-width = <4>;
 cap-sd-highspeed;
 cap-sdio-irq;
 max-frequency = <100000000>;
 mmc-pwrseq = <&sdio_pwrseq>;
 no-mmc;
 no-sd;
 non-removable;
 pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
 pinctrl-names = "default";
 sd-uhs-sdr104;
 vmmc-supply = <&vcc3v3_sys>;
 status = "okay";
};

&uart0 {
 pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
 pinctrl-names = "default";
 status = "okay";

 bluetooth {
  compatible = "realtek,rtl8822cs-bt";
  device-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>;
  enable-gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
  host-wake-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
  pinctrl-0 = <&bt_reset>, <&bt_wake_dev>, <&bt_wake_host>;
  pinctrl-names = "default";
 };
};

&uart2 {
 pinctrl-0 = <&uart2m1_xfer>;
 pinctrl-names = "default";
 status = "okay";
};

[Dauer der Verarbeitung: 0.21 Sekunden, vorverarbeitet 2026-06-08]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Quellcodebibliothek
     Eigene Quellcodes
     Fremde Quellcodes
     Suchen

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik