Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 

Benutzer

Quelle  r8a7790-stout.dts   Sprache: unbekannt

 
Spracherkennung für: .dts vermutete Sprache: Unknown {[0] [0] [0]} [Methode: Schwerpunktbildung, einfache Gewichte, sechs Dimensionen]

// SPDX-License-Identifier: GPL-2.0
/*
 * Device Tree Source for the Stout board
 *
 * Copyright (C) 2018 Marek Vasut <marek.vasut@gmail.com>
 */

/dts-v1/;
#include "r8a7790.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
 model = "Stout";
 compatible = "renesas,stout", "renesas,r8a7790";

 aliases {
  serial0 = &scifa0;
 };

 chosen {
  bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
  stdout-path = "serial0:115200n8";
 };

 memory@40000000 {
  device_type = "memory";
  reg = <0 0x40000000 0 0x40000000>;
 };

 leds {
  compatible = "gpio-leds";
  led1 {
   gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
  };
  led2 {
   gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
  };
  led3 {
   gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
  };
  led5 {
   gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
  };
 };

 fixedregulator1v8: regulator-1v8 {
  compatible = "regulator-fixed";
  regulator-name = "fixed-1.8V";
  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <1800000>;
  regulator-boot-on;
  regulator-always-on;
 };

 fixedregulator3v3: regulator-3v3 {
  compatible = "regulator-fixed";
  regulator-name = "fixed-3.3V";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  regulator-boot-on;
  regulator-always-on;
 };

 vcc_sdhi0: regulator-vcc-sdhi0 {
  compatible = "regulator-fixed";

  regulator-name = "SDHI0 Vcc";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;

  gpio = <&gpio5 24 GPIO_ACTIVE_HIGH>;
  enable-active-high;
 };

 hdmi-out {
  compatible = "hdmi-connector";
  type = "a";

  port {
   hdmi_con_out: endpoint {
    remote-endpoint = <&adv7511_out>;
   };
  };
 };

 osc1_clk: osc1-clock {
  compatible = "fixed-clock";
  #clock-cells = <0>;
  clock-frequency = <148500000>;
 };

 osc4_clk: osc4-clock {
  compatible = "fixed-clock";
  #clock-cells = <0>;
  clock-frequency = <12000000>;
 };
};

&du {
 pinctrl-0 = <&du_pins>;
 pinctrl-names = "default";
 status = "okay";

 clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
   <&osc1_clk>;
 clock-names = "du.0", "du.1", "du.2", "dclkin.0";

 ports {
  port@0 {
   endpoint {
    remote-endpoint = <&adv7511_in>;
   };
  };
 };
};

&lvds0 {
 ports {
  port@1 {
   lvds_connector0: endpoint {
   };
  };
 };
};

&lvds1 {
 ports {
  port@1 {
   lvds_connector1: endpoint {
   };
  };
 };
};

&extal_clk {
 clock-frequency = <20000000>;
};

&pfc {

 pinctrl-0 = <&scif_clk_pins>;
 pinctrl-names = "default";

 du_pins: du {
  groups = "du_rgb888", "du_sync_1", "du_clk_out_0";
  function = "du";
 };

 scifa0_pins: scifa0 {
  groups = "scifa0_data_b";
  function = "scifa0";
 };

 scif_clk_pins: scif_clk {
  groups = "scif_clk";
  function = "scif_clk";
 };

 ether_pins: ether {
  groups = "eth_link", "eth_mdio", "eth_rmii";
  function = "eth";
 };

 phy1_pins: phy1 {
  groups = "intc_irq1";
  function = "intc";
 };

 sdhi0_pins: sd0 {
  groups = "sdhi0_data4", "sdhi0_ctrl";
  function = "sdhi0";
  power-source = <3300>;
 };

 qspi_pins: qspi {
  groups = "qspi_ctrl", "qspi_data4";
  function = "qspi";
 };

 iic2_pins: iic2 {
  groups = "iic2_b";
  function = "iic2";
 };

 iic3_pins: iic3 {
  groups = "iic3";
  function = "iic3";
 };

 pmic_irq_pins: pmicirq {
  groups = "intc_irq2";
  function = "intc";
 };

 usb0_pins: usb0 {
  groups = "usb0";
  function = "usb0";
 };
};

ðer {
 pinctrl-0 = <ðer_pins>, <&phy1_pins>;
 pinctrl-names = "default";

 phy-handle = <&phy1>;
 renesas,ether-link-active-low;
 status = "okay";

 phy1: ethernet-phy@1 {
  compatible = "ethernet-phy-id0022.1537",
        "ethernet-phy-ieee802.3-c22";
  reg = <1>;
  interrupts-extended = <&irqc0 1 IRQ_TYPE_LEVEL_LOW>;
  micrel,led-mode = <1>;
  reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 };
};

&cmt0 {
 status = "okay";
};

&qspi {
 pinctrl-0 = <&qspi_pins>;
 pinctrl-names = "default";

 status = "okay";

 flash: flash@0 {
  compatible = "spansion,s25fl512s", "jedec,spi-nor";
  reg = <0>;
  spi-max-frequency = <30000000>;
  spi-tx-bus-width = <4>;
  spi-rx-bus-width = <4>;
  spi-cpha;
  spi-cpol;
  m25p,fast-read;

  partitions {
   compatible = "fixed-partitions";
   #address-cells = <1>;
   #size-cells = <1>;

   partition@0 {
    label = "loader";
    reg = <0x00000000 0x00080000>;
    read-only;
   };
   partition@80000 {
    label = "uboot";
    reg = <0x00080000 0x00040000>;
    read-only;
   };
   partition@c0000 {
    label = "uboot-env";
    reg = <0x000c0000 0x00040000>;
    read-only;
   };
   partition@100000 {
    label = "flash";
    reg = <0x00100000 0x03f00000>;
   };
  };
 };
};

&scifa0 {
 pinctrl-0 = <&scifa0_pins>;
 pinctrl-names = "default";
 bootph-all;

 status = "okay";
};

&scif_clk {
 clock-frequency = <14745600>;
};

&sdhi0 {
 pinctrl-0 = <&sdhi0_pins>;
 pinctrl-names = "default";

 vmmc-supply = <&vcc_sdhi0>;
 cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 status = "okay";
};

&cpu0 {
 cpu0-supply = <&vdd_dvfs>;
};

&iic2 {
 status = "okay";
 pinctrl-0 = <&iic2_pins>;
 pinctrl-names = "default";

 clock-frequency = <100000>;

 hdmi@39 {
  compatible = "adi,adv7511w";
  reg = <0x39>;
  interrupts-extended = <&gpio1 15 IRQ_TYPE_LEVEL_LOW>;
  clocks = <&osc4_clk>;
  clock-names = "cec";

  avdd-supply = <&fixedregulator1v8>;
  dvdd-supply = <&fixedregulator1v8>;
  pvdd-supply = <&fixedregulator1v8>;
  dvdd-3v-supply = <&fixedregulator3v3>;
  bgvdd-supply = <&fixedregulator1v8>;

  adi,input-depth = <8>;
  adi,input-colorspace = "rgb";
  adi,input-clock = "1x";

  ports {
   #address-cells = <1>;
   #size-cells = <0>;

   port@0 {
    reg = <0>;
    adv7511_in: endpoint {
     remote-endpoint = <&du_out_rgb>;
    };
   };

   port@1 {
    reg = <1>;
    adv7511_out: endpoint {
     remote-endpoint = <&hdmi_con_out>;
    };
   };
  };
 };
};

&iic3 {
 pinctrl-names = "default";
 pinctrl-0 = <&iic3_pins>, <&pmic_irq_pins>;
 status = "okay";

 pmic@58 {
  compatible = "dlg,da9063";
  reg = <0x58>;
  interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;
  interrupt-controller;
  #interrupt-cells = <2>;

  onkey {
   compatible = "dlg,da9063-onkey";
  };

  rtc {
   compatible = "dlg,da9063-rtc";
  };

  watchdog {
   compatible = "dlg,da9063-watchdog";
  };
 };

 vdd_dvfs: regulator@68 {
  compatible = "dlg,da9210";
  reg = <0x68>;
  interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;

  regulator-min-microvolt = <1000000>;
  regulator-max-microvolt = <1000000>;
  regulator-boot-on;
  regulator-always-on;
 };

 vdd: regulator@70 {
  compatible = "dlg,da9210";
  reg = <0x70>;
  interrupts-extended = <&irqc0 2 IRQ_TYPE_LEVEL_LOW>;

  regulator-min-microvolt = <1000000>;
  regulator-max-microvolt = <1000000>;
  regulator-boot-on;
  regulator-always-on;
 };
};

&pci0 {
 status = "okay";
 pinctrl-0 = <&usb0_pins>;
 pinctrl-names = "default";
};

&usbphy {
 status = "okay";
};

[Dauer der Verarbeitung: 0.20 Sekunden, vorverarbeitet 2026-06-07]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge