Quelle  qcom,gsbi.yaml   Sprache: unbekannt

# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/soc/qcom/qcom,gsbi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Qualcomm General Serial Bus Interface (GSBI)

maintainers:
  - Andy Gross <agross@kernel.org>
  - Bjorn Andersson <bjorn.andersson@linaro.org>
  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

description:
  The GSBI controller is modeled as a node with zero or more child nodes, each
  representing a serial sub-node device that is mux'd as part of the GSBI
  configuration settings.  The mode setting will govern the input/output mode
  of the 4 GSBI IOs.

  A GSBI controller node can contain 0 or more child nodes representing serial
  devices.  These serial devices can be a QCOM UART, I2C controller, spi
  controller, or some combination of aforementioned devices.

properties:
  compatible:
    const: qcom,gsbi-v1.0.0

  '#address-cells':
    const: 1

  cell-index:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      The GSBI index.

  clocks:
    maxItems: 1

  clock-names:
    const: iface

  qcom,crci:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      CRCI MUX value for QUP CRCI ports.  Please reference
      include/dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.

  qcom,mode:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      MUX value for configuration of the serial interface.  Please reference
      include/dt-bindings/soc/qcom,gsbi.h for valid mux values.

  '#size-cells':
    const: 1

  syscon-tcsr:
    $ref: /schemas/types.yaml#/definitions/phandle
    description:
      Phandle of TCSR syscon node.Required if child uses dma.

  ranges: true

  reg:
    maxItems: 1

patternProperties:
  "spi@[0-9a-f]+$":
    type: object
    $ref: /schemas/spi/qcom,spi-qup.yaml#

  "i2c@[0-9a-f]+$":
    type: object
    $ref: /schemas/i2c/qcom,i2c-qup.yaml#

  "serial@[0-9a-f]+$":
    type: object
    $ref: /schemas/serial/qcom,msm-uartdm.yaml#

required:
  - compatible
  - cell-index
  - clocks
  - clock-names
  - qcom,mode
  - reg

additionalProperties: false

examples:
  - |
    #include <dt-bindings/clock/qcom,gcc-msm8960.h>
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/soc/qcom,gsbi.h>

    gsbi@12440000 {
        compatible = "qcom,gsbi-v1.0.0";
        reg = <0x12440000 0x100>;
        cell-index = <1>;
        clocks = <&gcc GSBI1_H_CLK>;
        clock-names = "iface";
        #address-cells = <1>;
        #size-cells = <1>;
        ranges;

        syscon-tcsr = <&tcsr>;
        qcom,mode = <GSBI_PROT_I2C_UART>;

        serial@12450000 {
            compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
            reg = <0x12450000 0x100>,
                  <0x12400000 0x03>;
            interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
            clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
            clock-names = "core", "iface";
        };

        i2c@12460000 {
            compatible = "qcom,i2c-qup-v1.1.1";
            reg = <0x12460000 0x1000>;
            pinctrl-0 = <&i2c1_pins>;
            pinctrl-1 = <&i2c1_pins_sleep>;
            pinctrl-names = "default", "sleep";
            interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
            clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
            clock-names = "core", "iface";
            #address-cells = <1>;
            #size-cells = <0>;

            status = "disabled"; /* UART chosen */
        };
    };