Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  altr,tse.yaml   Sprache: unbekannt

 
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/altr,tse.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Altera Triple Speed Ethernet MAC driver (TSE)

maintainers:
  - Maxime Chevallier <maxime.chevallier@bootlin.com>

properties:
  compatible:
    oneOf:
      - const: altr,tse-1.0
      - const: ALTR,tse-1.0
        deprecated: true
      - const: altr,tse-msgdma-1.0

  interrupts:
    minItems: 2

  interrupt-names:
    items:
      - const: rx_irq
      - const: tx_irq

  rx-fifo-depth:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      Depth in bytes of the RX FIFO

  tx-fifo-depth:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      Depth in bytes of the TX FIFO

  altr,has-supplementary-unicast:
    type: boolean
    description:
      If present, TSE supports additional unicast addresses.

  altr,has-hash-multicast-filter:
    type: boolean
    description:
      If present, TSE supports hash based multicast filter.

  mdio:
    $ref: mdio.yaml#
    unevaluatedProperties: false
    description:
      Creates and registers an MDIO bus.

    properties:
      compatible:
        const: altr,tse-mdio

    required:
      - compatible

required:
  - compatible
  - reg
  - interrupts
  - rx-fifo-depth
  - tx-fifo-depth

allOf:
  - $ref: ethernet-controller.yaml#
  - if:
      properties:
        compatible:
          contains:
            enum:
              - altr,tse-1.0
              - ALTR,tse-1.0
    then:
      properties:
        reg:
          minItems: 4
        reg-names:
          items:
            - const: control_port
            - const: rx_csr
            - const: tx_csr
            - const: s1

  - if:
      properties:
        compatible:
          contains:
            enum:
              - altr,tse-msgdma-1.0
    then:
      properties:
        reg:
          minItems: 6
          maxItems: 7
        reg-names:
          minItems: 6
          items:
            - const: control_port
            - const: rx_csr
            - const: rx_desc
            - const: rx_resp
            - const: tx_csr
            - const: tx_desc
            - const: pcs

unevaluatedProperties: false

examples:
  - |
    tse_sub_0: ethernet@c0100000 {
        compatible = "altr,tse-msgdma-1.0";
        reg = <0xc0100000 0x00000400>,
              <0xc0101000 0x00000020>,
              <0xc0102000 0x00000020>,
              <0xc0103000 0x00000008>,
              <0xc0104000 0x00000020>,
              <0xc0105000 0x00000020>,
              <0xc0106000 0x00000100>;
        reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc", "pcs";
        interrupt-parent = <&intc>;
        interrupts = <0 44 4>,<0 45 4>;
        interrupt-names = "rx_irq","tx_irq";
        rx-fifo-depth = <2048>;
        tx-fifo-depth = <2048>;
        max-frame-size = <1500>;
        local-mac-address = [ 00 00 00 00 00 00 ];
        altr,has-supplementary-unicast;
        altr,has-hash-multicast-filter;
        sfp = <&sfp0>;
        phy-mode = "sgmii";
        managed = "in-band-status";
    };
  - |
    tse_sub_1_eth_tse_0: ethernet@1,00001000 {
        compatible = "altr,tse-msgdma-1.0";
        reg = <0x00001000 0x00000400>,
              <0x00001460 0x00000020>,
              <0x00001480 0x00000020>,
              <0x000014A0 0x00000008>,
              <0x00001400 0x00000020>,
              <0x00001420 0x00000020>;
        reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
        interrupt-parent = <&hps_0_arm_gic_0>;
        interrupts = <0 43 4>, <0 42 4>;
        interrupt-names = "rx_irq", "tx_irq";
        rx-fifo-depth = <2048>;
        tx-fifo-depth = <2048>;
        max-frame-size = <1500>;
        local-mac-address = [ 00 00 00 00 00 00 ];
        phy-mode = "gmii";
        altr,has-supplementary-unicast;
        altr,has-hash-multicast-filter;
        phy-handle = <&phy1>;
        mdio {
            compatible = "altr,tse-mdio";
            #address-cells = <1>;
            #size-cells = <0>;
            phy1: ethernet-phy@1 {
                reg = <0x1>;
            };
        };
    };

...

[ Dauer der Verarbeitung: 0.11 Sekunden  (vorverarbeitet)  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge