Eine aufbereitete Darstellung der Quelle

 
     
 
 
Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 
Benutzer

products/Sources/formale Sprachen/C/LibreOffice/icon-themes/breeze/cmd/   (LibreOffice Version 25.8.3.2©)  Datei vom 5.10.2025 mit Größe 358 B image not shown  

Bilddatei

gemini-sl93512r.dts


products/Sources/formale Sprachen/C/Linux/arch/arm/boot/dts/gemini/gemini-sl93512r.dts

// SPDX-License-Identifier: GPL-2.0 /* * Device Tree file for the Storm Semiconductor SL93512R_BRD * Gemini reference design, also initially called * "Gemini324 EV-Board" before Storm acquired Storlink Semiconductor. * The series were later acquired by Cortina Systems. */ /dts-v1/; #include "gemini.dtsi" #include / { model = "Storlink Semiconductor Gemini324 EV-Board / Storm Semiconductor SL93512R_BRD"; compatible = "storlink,gemini324", "storm,sl93512r", "cortina,gemini"; #address-cells = <1>; #size-cells = <1>; memory@0 { /* 64 MB Samsung K4H511638B */ device_type = "memory"; reg = <0x00000000 0x4000000>; }; chosen { bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait"; stdout-path = &uart0; }; gpio_keys { compatible = "gpio-keys"; button-wps { debounce-interval = <50>; wakeup-source; linux,code = ; label = "WPS"; /* Conflicts with TVC and extended flash */ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; }; button-setup { debounce-interval = <50>; wakeup-source; linux,code = ; label = "factory reset"; /* Conflict with NAND flash */ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; }; }; leds { compatible = "gpio-leds"; led-green-harddisk { label = "sq201:green:harddisk"; /* Conflict with LCD (no problem) */ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; default-state = "off"; linux,default-trigger = "disk-activity"; }; led-green-wireless { label = "sq201:green:wireless"; /* Conflict with NAND flash CE0 (no problem) */ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; default-state = "on"; linux,default-trigger = "heartbeat"; }; }; mdio0: mdio { compatible = "virtual,mdio-gpio"; /* Uses MDC and MDIO */ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */ #address-cells = <1>; #size-cells = <0>; /* This is a Marvell 88E1111 ethernet transciever */ phy0: ethernet-phy@1 { reg = <1>; }; }; spi { compatible = "spi-gpio"; #address-cells = <1>; #size-cells = <0>; /* Check pin collisions */ sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; ethernet-switch@0 { compatible = "vitesse,vsc7385"; reg = <0>; /* Specified for 2.5 MHz or below */ spi-max-frequency = <2500000>; gpio-controller; #gpio-cells = <2>; ethernet-ports { #address-cells = <1>; #size-cells = <0>; ethernet-port@0 { reg = <0>; label = "lan1"; }; ethernet-port@1 { reg = <1>; label = "lan2"; }; ethernet-port@2 { reg = <2>; label = "lan3"; }; ethernet-port@3 { reg = <3>; label = "lan4"; }; vsc: ethernet-port@6 { reg = <6>; label = "cpu"; ethernet = <&gmac1>; phy-mode = "rgmii"; fixed-link { speed = <1000>; full-duplex; pause; }; }; }; }; }; soc { flash@30000000 { status = "okay"; /* 16MB of flash */ reg = <0x30000000 0x01000000>; partitions { compatible = "redboot-fis"; /* Eraseblock at 0xfe0000 */ fis-index-block = <0x1fc>; }; }; syscon: syscon@40000000 { pinctrl { /* * gpio0agrp cover line 0, used by WPS button * gpio0fgrp cover line 16 used by HD LED * gpio0ggrp cover line 17, 18 used by wireless LAN LED and * reset button OR USB ID select on 17 and USB VBUS select * on 18. (Confusing.) * gpio0igrp cover line 21, 22 used by MDIO for Marvell PHY */ gpio0_default_pins: pinctrl-gpio0 { mux { function = "gpio0"; groups = "gpio0agrp", "gpio0fgrp", "gpio0ggrp", "gpio0igrp"; }; }; /* * gpio1dgrp cover lines used by SPI for * the Vitesse chip (28-31) */ gpio1_default_pins: pinctrl-gpio1 { mux { function = "gpio1"; groups = "gpio1dgrp"; }; }; pinctrl-gmii { mux { function = "gmii"; groups = "gmii_gmac0_grp", "gmii_gmac1_grp"; }; /* Control pad skew comes from sl_switch.c in the vendor code */ conf0 { pins = "P10 GMAC1 TXC"; skew-delay = <5>; }; conf1 { pins = "V11 GMAC1 TXEN"; skew-delay = <7>; }; conf2 { pins = "T11 GMAC1 RXC"; skew-delay = <8>; }; conf3 { pins = "U11 GMAC1 RXDV"; skew-delay = <7>; }; conf4 { pins = "V7 GMAC0 TXC"; skew-delay = <10>; }; conf5 { pins = "P8 GMAC0 TXEN"; skew-delay = <7>; /* 5 at another place? */ }; conf6 { pins = "T8 GMAC0 RXC"; skew-delay = <15>; }; conf7 { pins = "R8 GMAC0 RXDV"; skew-delay = <0>; }; conf8 { /* The data lines all have default skew */ pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1", "P9 GMAC0 RXD2", "R9 GMAC0 RXD3", "R11 GMAC1 RXD0", "P11 GMAC1 RXD1", "V12 GMAC1 RXD2", "U12 GMAC1 RXD3", "R10 GMAC1 TXD0", "T10 GMAC1 TXD1", "U10 GMAC1 TXD2", "V10 GMAC1 TXD3"; skew-delay = <7>; }; /* Appears in sl351x_gmac.c in the vendor code */ conf9 { pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1", "R7 GMAC0 TXD2", "P7 GMAC0 TXD3"; skew-delay = <5>; }; }; }; }; /* Both interfaces brought out on SATA connectors */ sata: sata@46000000 { cortina,gemini-ata-muxmode = <0>; cortina,gemini-enable-sata-bridge; status = "okay"; }; gpio0: gpio@4d000000 { pinctrl-names = "default"; pinctrl-0 = <&gpio0_default_pins>; }; gpio1: gpio@4e000000 { pinctrl-names = "default"; pinctrl-0 = <&gpio1_default_pins>; }; pci@50000000 { status = "okay"; }; ethernet@60000000 { status = "okay"; ethernet-port@0 { phy-mode = "rgmii"; phy-handle = <&phy0>; }; ethernet-port@1 { phy-mode = "rgmii"; fixed-link { speed = <1000>; full-duplex; pause; }; }; }; ide@63000000 { status = "okay"; }; ide@63400000 { status = "okay"; }; usb@68000000 { status = "okay"; }; usb@69000000 { status = "okay"; }; }; };

                                                                                                                                                                                                                                                                                                                                                                                                     

Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Quellcodebibliothek
     Eigene Quellcodes
     Fremde Quellcodes
     Suchen

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder
Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik