// SPDX-License-Identifier: GPL-2.0-only
/*
* Core driver for the generic pin config portions of the pin control subsystem
*
* Copyright ( C ) 2011 ST - Ericsson SA
* Written on behalf of Linaro for ST - Ericsson
*
* Author : Linus Walleij < linus . walleij @ linaro . org >
*/
#define pr_fmt(fmt) "generic pinconfig core: " fmt
#include <linux/array_size.h>
#include <linux/debugfs.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/seq_file.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinctrl.h>
#include "core.h"
#include "pinconf.h"
#include "pinctrl-utils.h"
#ifdef CONFIG_DEBUG_FS
static const struct pin_config_item conf_items[] = {
PCONFDUMP(PIN_CONFIG_BIAS_BUS_HOLD, "input bias bus hold" , NULL, false ),
PCONFDUMP(PIN_CONFIG_BIAS_DISABLE, "input bias disabled" , NULL, false ),
PCONFDUMP(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, "input bias high impedance" , NULL, false ),
PCONFDUMP(PIN_CONFIG_BIAS_PULL_DOWN, "input bias pull down" , "ohms" , true ),
PCONFDUMP(PIN_CONFIG_BIAS_PULL_PIN_DEFAULT,
"input bias pull to pin specific state" , "ohms" , true ),
PCONFDUMP(PIN_CONFIG_BIAS_PULL_UP, "input bias pull up" , "ohms" , true ),
PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain" , NULL, false ),
PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source" , NULL, false ),
PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull" , NULL, false ),
PCONFDUMP(PIN_CONFIG_DRIVE_STRENGTH, "output drive strength" , "mA" , true ),
PCONFDUMP(PIN_CONFIG_DRIVE_STRENGTH_UA, "output drive strength" , "uA" , true ),
PCONFDUMP(PIN_CONFIG_INPUT_DEBOUNCE, "input debounce" , "usec" , true ),
PCONFDUMP(PIN_CONFIG_INPUT_ENABLE, "input enabled" , NULL, false ),
PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT, "input schmitt trigger" , NULL, false ),
PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_UV, "input schmitt threshold" , "uV" , true ),
PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_ENABLE, "input schmitt enabled" , NULL, false ),
PCONFDUMP(PIN_CONFIG_MODE_LOW_POWER, "pin low power" , "mode" , true ),
PCONFDUMP(PIN_CONFIG_OUTPUT_ENABLE, "output enabled" , NULL, false ),
PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output" , "level" , true ),
PCONFDUMP(PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS, "output impedance" , "ohms" , true ),
PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source" , "selector" , true ),
PCONFDUMP(PIN_CONFIG_SLEEP_HARDWARE_STATE, "sleep hardware state" , NULL, false ),
PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate" , NULL, true ),
PCONFDUMP(PIN_CONFIG_SKEW_DELAY, "skew delay" , NULL, true ),
};
static void pinconf_generic_dump_one(struct pinctrl_dev *pctldev,
struct seq_file *s, const char *gname,
unsigned int pin,
const struct pin_config_item *items,
int nitems, int *print_sep)
{
int i;
for (i = 0 ; i < nitems; i++) {
unsigned long config;
int ret;
/* We want to check out this parameter */
config = pinconf_to_config_packed(items[i].param, 0 );
if (gname)
ret = pin_config_group_get(dev_name(pctldev->dev),
gname, &config);
else
ret = pin_config_get_for_pin(pctldev, pin, &config);
/* These are legal errors */
if (ret == -EINVAL || ret == -ENOTSUPP)
continue ;
if (ret) {
seq_printf(s, "ERROR READING CONFIG SETTING %d " , i);
continue ;
}
/* comma between multiple configs */
if (*print_sep)
seq_puts(s, ", " );
*print_sep = 1 ;
seq_puts(s, items[i].display);
/* Print unit if available */
if (items[i].has_arg) {
u32 val = pinconf_to_config_argument(config);
if (items[i].format)
seq_printf(s, " (%u %s)" , val, items[i].format);
else
seq_printf(s, " (0x%x)" , val);
}
}
}
/**
* pinconf_generic_dump_pins - Print information about pin or group of pins
* @ pctldev : Pincontrol device
* @ s : File to print to
* @ gname : Group name specifying pins
* @ pin : Pin number specyfying pin
*
* Print the pinconf configuration for the requested pin ( s ) to @ s . Pins can be
* specified either by pin using @ pin or by group using @ gname . Only one needs
* to be specified the other can be NULL / 0 .
*/
void pinconf_generic_dump_pins(struct pinctrl_dev *pctldev, struct seq_file *s,
const char *gname, unsigned int pin)
{
const struct pinconf_ops *ops = pctldev->desc->confops;
int print_sep = 0 ;
if (!ops->is_generic)
return ;
/* generic parameters */
pinconf_generic_dump_one(pctldev, s, gname, pin, conf_items,
ARRAY_SIZE(conf_items), &print_sep);
/* driver-specific parameters */
if (pctldev->desc->num_custom_params &&
pctldev->desc->custom_conf_items)
pinconf_generic_dump_one(pctldev, s, gname, pin,
pctldev->desc->custom_conf_items,
pctldev->desc->num_custom_params,
&print_sep);
}
void pinconf_generic_dump_config(struct pinctrl_dev *pctldev,
struct seq_file *s, unsigned long config)
{
int i;
for (i = 0 ; i < ARRAY_SIZE(conf_items); i++) {
if (pinconf_to_config_param(config) != conf_items[i].param)
continue ;
seq_printf(s, "%s: 0x%x" , conf_items[i].display,
pinconf_to_config_argument(config));
}
if (!pctldev->desc->num_custom_params ||
!pctldev->desc->custom_conf_items)
return ;
for (i = 0 ; i < pctldev->desc->num_custom_params; i++) {
if (pinconf_to_config_param(config) !=
pctldev->desc->custom_conf_items[i].param)
continue ;
seq_printf(s, "%s: 0x%x" ,
pctldev->desc->custom_conf_items[i].display,
pinconf_to_config_argument(config));
}
}
EXPORT_SYMBOL_GPL(pinconf_generic_dump_config);
#endif
#ifdef CONFIG_OF
static const struct pinconf_generic_params dt_params[] = {
{ "bias-bus-hold" , PIN_CONFIG_BIAS_BUS_HOLD, 0 },
{ "bias-disable" , PIN_CONFIG_BIAS_DISABLE, 0 },
{ "bias-high-impedance" , PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0 },
{ "bias-pull-up" , PIN_CONFIG_BIAS_PULL_UP, 1 },
{ "bias-pull-pin-default" , PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 },
{ "bias-pull-down" , PIN_CONFIG_BIAS_PULL_DOWN, 1 },
{ "drive-open-drain" , PIN_CONFIG_DRIVE_OPEN_DRAIN, 0 },
{ "drive-open-source" , PIN_CONFIG_DRIVE_OPEN_SOURCE, 0 },
{ "drive-push-pull" , PIN_CONFIG_DRIVE_PUSH_PULL, 0 },
{ "drive-strength" , PIN_CONFIG_DRIVE_STRENGTH, 0 },
{ "drive-strength-microamp" , PIN_CONFIG_DRIVE_STRENGTH_UA, 0 },
{ "input-debounce" , PIN_CONFIG_INPUT_DEBOUNCE, 0 },
{ "input-disable" , PIN_CONFIG_INPUT_ENABLE, 0 },
{ "input-enable" , PIN_CONFIG_INPUT_ENABLE, 1 },
{ "input-schmitt" , PIN_CONFIG_INPUT_SCHMITT, 0 },
{ "input-schmitt-disable" , PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 },
{ "input-schmitt-enable" , PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 },
{ "input-schmitt-microvolts" , PIN_CONFIG_INPUT_SCHMITT_UV, 0 },
{ "low-power-disable" , PIN_CONFIG_MODE_LOW_POWER, 0 },
{ "low-power-enable" , PIN_CONFIG_MODE_LOW_POWER, 1 },
{ "output-disable" , PIN_CONFIG_OUTPUT_ENABLE, 0 },
{ "output-enable" , PIN_CONFIG_OUTPUT_ENABLE, 1 },
{ "output-high" , PIN_CONFIG_OUTPUT, 1 , },
{ "output-impedance-ohms" , PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS, 0 },
{ "output-low" , PIN_CONFIG_OUTPUT, 0 , },
{ "power-source" , PIN_CONFIG_POWER_SOURCE, 0 },
{ "sleep-hardware-state" , PIN_CONFIG_SLEEP_HARDWARE_STATE, 0 },
{ "slew-rate" , PIN_CONFIG_SLEW_RATE, 0 },
{ "skew-delay" , PIN_CONFIG_SKEW_DELAY, 0 },
};
/**
* parse_dt_cfg ( ) - Parse DT pinconf parameters
* @ np : DT node
* @ params : Array of describing generic parameters
* @ count : Number of entries in @ params
* @ cfg : Array of parsed config options
* @ ncfg : Number of entries in @ cfg
*
* Parse the config options described in @ params from @ np and puts the result
* in @ cfg . @ cfg does not need to be empty , entries are added beginning at
* @ ncfg . @ ncfg is updated to reflect the number of entries after parsing . @ cfg
* needs to have enough memory allocated to hold all possible entries .
*/
static void parse_dt_cfg(struct device_node *np,
const struct pinconf_generic_params *params,
unsigned int count, unsigned long *cfg,
unsigned int *ncfg)
{
int i;
for (i = 0 ; i < count; i++) {
u32 val;
int ret;
const struct pinconf_generic_params *par = ¶ms[i];
ret = of_property_read_u32(np, par->property, &val);
/* property not found */
if (ret == -EINVAL)
continue ;
/* use default value, when no value is specified */
if (ret)
val = par->default_value;
pr_debug("found %s with value %u\n" , par->property, val);
cfg[*ncfg] = pinconf_to_config_packed(par->param, val);
(*ncfg)++;
}
}
/**
* pinconf_generic_parse_dt_pinmux ( )
* parse the pinmux properties into generic pin mux values .
* @ np : node containing the pinmux properties
* @ dev : pincontrol core device
* @ pid : array with pin identity entries
* @ pmux : array with pin mux value entries
* @ npins : number of pins
*
* pinmux propertity : mux value [ 0 , 7 ] bits and pin identity [ 8 , 31 ] bits .
*/
int pinconf_generic_parse_dt_pinmux(struct device_node *np, struct device *dev,
unsigned int **pid, unsigned int **pmux,
unsigned int *npins)
{
unsigned int *pid_t;
unsigned int *pmux_t;
struct property *prop;
unsigned int npins_t, i;
u32 value;
int ret;
prop = of_find_property(np, "pinmux" , NULL);
if (!prop) {
dev_info(dev, "Missing pinmux property\n" );
return -ENOENT;
}
if (!pid || !pmux || !npins) {
dev_err(dev, "parameters error\n" );
return -EINVAL;
}
npins_t = prop->length / sizeof (u32);
pid_t = devm_kcalloc(dev, npins_t, sizeof (*pid_t), GFP_KERNEL);
pmux_t = devm_kcalloc(dev, npins_t, sizeof (*pmux_t), GFP_KERNEL);
if (!pid_t || !pmux_t) {
dev_err(dev, "kalloc memory fail\n" );
return -ENOMEM;
}
for (i = 0 ; i < npins_t; i++) {
ret = of_property_read_u32_index(np, "pinmux" , i, &value);
if (ret) {
dev_err(dev, "get pinmux value fail\n" );
goto exit ;
}
pmux_t[i] = value & 0 xff;
pid_t[i] = (value >> 8 ) & 0 xffffff;
}
*pid = pid_t;
*pmux = pmux_t;
*npins = npins_t;
return 0 ;
exit :
devm_kfree(dev, pid_t);
devm_kfree(dev, pmux_t);
return ret;
}
EXPORT_SYMBOL_GPL(pinconf_generic_parse_dt_pinmux);
/**
* pinconf_generic_parse_dt_config ( )
* parse the config properties into generic pinconfig values .
* @ np : node containing the pinconfig properties
* @ pctldev : pincontrol device
* @ configs : array with nconfigs entries containing the generic pinconf values
* must be freed when no longer necessary .
* @ nconfigs : number of configurations
*/
int pinconf_generic_parse_dt_config(struct device_node *np,
struct pinctrl_dev *pctldev,
unsigned long **configs,
unsigned int *nconfigs)
{
unsigned long *cfg;
unsigned int max_cfg, ncfg = 0 ;
int ret;
if (!np)
return -EINVAL;
/* allocate a temporary array big enough to hold one of each option */
max_cfg = ARRAY_SIZE(dt_params);
if (pctldev)
max_cfg += pctldev->desc->num_custom_params;
cfg = kcalloc(max_cfg, sizeof (*cfg), GFP_KERNEL);
if (!cfg)
return -ENOMEM;
parse_dt_cfg(np, dt_params, ARRAY_SIZE(dt_params), cfg, &ncfg);
if (pctldev && pctldev->desc->num_custom_params &&
pctldev->desc->custom_params)
parse_dt_cfg(np, pctldev->desc->custom_params,
pctldev->desc->num_custom_params, cfg, &ncfg);
ret = 0 ;
/* no configs found at all */
if (ncfg == 0 ) {
*configs = NULL;
*nconfigs = 0 ;
goto out;
}
/*
* Now limit the number of configs to the real number of
* found properties .
*/
*configs = kmemdup(cfg, ncfg * sizeof (unsigned long ), GFP_KERNEL);
if (!*configs) {
ret = -ENOMEM;
goto out;
}
*nconfigs = ncfg;
out:
kfree(cfg);
return ret;
}
EXPORT_SYMBOL_GPL(pinconf_generic_parse_dt_config);
int pinconf_generic_dt_node_to_map_pinmux(struct pinctrl_dev *pctldev,
struct device_node *np,
struct pinctrl_map **map,
unsigned int *num_maps)
{
struct device *dev = pctldev->dev;
struct device_node *pnode;
unsigned long *configs = NULL;
unsigned int num_configs = 0 ;
struct property *prop;
unsigned int reserved_maps;
int reserve;
int ret;
prop = of_find_property(np, "pinmux" , NULL);
if (!prop) {
dev_info(dev, "Missing pinmux property\n" );
return -ENOENT;
}
pnode = of_get_parent(np);
if (!pnode) {
dev_info(dev, "Missing function node\n" );
return -EINVAL;
}
reserved_maps = 0 ;
*map = NULL;
*num_maps = 0 ;
ret = pinconf_generic_parse_dt_config(np, pctldev, &configs,
&num_configs);
if (ret < 0 ) {
dev_err(dev, "%pOF: could not parse node property\n" , np);
return ret;
}
reserve = 1 ;
if (num_configs)
reserve++;
ret = pinctrl_utils_reserve_map(pctldev, map, &reserved_maps,
num_maps, reserve);
if (ret < 0 )
goto exit ;
ret = pinctrl_utils_add_map_mux(pctldev, map,
&reserved_maps, num_maps, np->name,
pnode->name);
if (ret < 0 )
goto exit ;
if (num_configs) {
ret = pinctrl_utils_add_map_configs(pctldev, map, &reserved_maps,
num_maps, np->name, configs,
num_configs, PIN_MAP_TYPE_CONFIGS_GROUP);
if (ret < 0 )
goto exit ;
}
exit :
kfree(configs);
if (ret)
pinctrl_utils_free_map(pctldev, *map, *num_maps);
return ret;
}
EXPORT_SYMBOL_GPL(pinconf_generic_dt_node_to_map_pinmux);
int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
struct device_node *np, struct pinctrl_map **map,
unsigned int *reserved_maps, unsigned int *num_maps,
enum pinctrl_map_type type)
{
int ret;
const char *function;
struct device *dev = pctldev->dev;
unsigned long *configs = NULL;
unsigned int num_configs = 0 ;
unsigned int reserve, strings_count;
struct property *prop;
const char *group;
const char *subnode_target_type = "pins" ;
ret = of_property_count_strings(np, "pins" );
if (ret < 0 ) {
ret = of_property_count_strings(np, "groups" );
if (ret < 0 )
/* skip this node; may contain config child nodes */
return 0 ;
if (type == PIN_MAP_TYPE_INVALID)
type = PIN_MAP_TYPE_CONFIGS_GROUP;
subnode_target_type = "groups" ;
} else {
if (type == PIN_MAP_TYPE_INVALID)
type = PIN_MAP_TYPE_CONFIGS_PIN;
}
strings_count = ret;
ret = of_property_read_string(np, "function" , &function);
if (ret < 0 ) {
/* EINVAL=missing, which is fine since it's optional */
if (ret != -EINVAL)
dev_err(dev, "%pOF: could not parse property function\n" ,
np);
function = NULL;
}
ret = pinconf_generic_parse_dt_config(np, pctldev, &configs,
&num_configs);
if (ret < 0 ) {
dev_err(dev, "%pOF: could not parse node property\n" , np);
return ret;
}
reserve = 0 ;
if (function != NULL)
reserve++;
if (num_configs)
reserve++;
reserve *= strings_count;
ret = pinctrl_utils_reserve_map(pctldev, map, reserved_maps,
num_maps, reserve);
if (ret < 0 )
goto exit ;
of_property_for_each_string(np, subnode_target_type, prop, group) {
if (function) {
ret = pinctrl_utils_add_map_mux(pctldev, map,
reserved_maps, num_maps, group,
function);
if (ret < 0 )
goto exit ;
}
if (num_configs) {
ret = pinctrl_utils_add_map_configs(pctldev, map,
reserved_maps, num_maps, group, configs,
num_configs, type);
if (ret < 0 )
goto exit ;
}
}
ret = 0 ;
exit :
kfree(configs);
return ret;
}
EXPORT_SYMBOL_GPL(pinconf_generic_dt_subnode_to_map);
int pinconf_generic_dt_node_to_map(struct pinctrl_dev *pctldev,
struct device_node *np_config, struct pinctrl_map **map,
unsigned int *num_maps, enum pinctrl_map_type type)
{
unsigned int reserved_maps;
int ret;
reserved_maps = 0 ;
*map = NULL;
*num_maps = 0 ;
ret = pinconf_generic_dt_subnode_to_map(pctldev, np_config, map,
&reserved_maps, num_maps, type);
if (ret < 0 )
goto exit ;
for_each_available_child_of_node_scoped(np_config, np) {
ret = pinconf_generic_dt_subnode_to_map(pctldev, np, map,
&reserved_maps, num_maps, type);
if (ret < 0 )
goto exit ;
}
return 0 ;
exit :
pinctrl_utils_free_map(pctldev, *map, *num_maps);
return ret;
}
EXPORT_SYMBOL_GPL(pinconf_generic_dt_node_to_map);
void pinconf_generic_dt_free_map(struct pinctrl_dev *pctldev,
struct pinctrl_map *map,
unsigned int num_maps)
{
pinctrl_utils_free_map(pctldev, map, num_maps);
}
EXPORT_SYMBOL_GPL(pinconf_generic_dt_free_map);
#endif
Messung V0.5 in Prozent C=97 H=89 G=93
¤ Dauer der Verarbeitung: 0.14 Sekunden
(vorverarbeitet am 2026-09-29)
¤
*© Formatika GbR, Deutschland